Sifting through the airwaves: Efficient and scalable multiband RF harvesting

Harvesting ambient RF power is attractive as a means to operate microelectronics without wires, batteries, or even a dedicated RFID reader. However, most previous ambient RF harvesters have been narrowband, making mobile sensing scenarios infeasible: an RF harvester tuned to work in one city will not generally work in another, as the spectral environments tend to differ. This paper presents a novel approach to multiband harvesting. A single wideband antenna is followed by several narrowband rectifier chains. Each rectifier chain consists of a bandpass filter, a tuned impedance matching network, and a rectifier. The outputs of the rectifiers are combined via a novel diode summation network that enables good performance even when only a subset of the narrowband harvesters is excited. These techniques make ambient RF harvesting feasible for mobile applications. The techniques can potentially enable applications such as ambient RF-powered data logging sensors that upload data to RFID readers when in range.

[1]  Stephen Berard,et al.  Implications of Historical Trends in the Electrical Efficiency of Computing , 2011, IEEE Annals of the History of Computing.

[2]  Yi Zhao,et al.  A wireless sensing platform utilizing ambient RF energy , 2013, 2013 IEEE 13th Topical Meeting on Silicon Monolithic Integrated Circuits in RF Systems.

[3]  R. Fano.  Theoretical limitations on the broadband matching of arbitrary impedances , 1950 .

[4]  D.J. Yeager,et al.  Wirelessly-Charged UHF Tags for Sensor Data Collection , 2008, 2008 IEEE International Conference on RFID.

[5]  Emmanuel Bergeret,et al.  Auto-tuning in passive UHF RFID tags , 2010, Proceedings of the 8th IEEE International NEWCAS Conference 2010.

[6]  A. G. Tijhuis,et al.  Multi-band simultaneous radio frequency energy harvesting , 2013, 2013 7th European Conference on Antennas and Propagation (EuCAP).

[7]  Alanson P. Sample,et al.  Wireless Ambient Radio Power , 2013 .

[8]  R. Zane,et al.  Recycling ambient microwave energy with broad-band rectenna arrays , 2004, IEEE Transactions on Microwave Theory and Techniques.

[9]  David Wetherall,et al.  Ambient backscatter: wireless communication out of thin air , 2013, SIGCOMM.

[10]  Joshua R. Smith.  Range Scaling of Wirelessly Powered Sensor Systems , 2013 .

[11]  Joshua R. Smith,et al.  Experimental results with two wireless power transfer systems , 2009, 2009 IEEE Radio and Wireless Symposium.

[12]  J. F. Dickson,et al.  On-chip high-voltage generation in MNOS integrated circuits using an improved voltage multiplier technique , 1976 .

[13]  M. Tentzeris,et al.  A Compact Dual-Band Rectenna Using Slot-Loaded Dual Band Folded Dipole Antenna , 2013, IEEE Antennas and Wireless Propagation Letters.