Integration of SCADA services in cross-infrastructure holistic tests of cyber-physical energy systems

Cyber-Physical Energy System, due to its multi-domain nature, requires a holistic validation methodology, which may involve the integration of assets and expertise from various research infrastructures. In this paper, the integration of Supervisory Control and Data Acquisition services to cross- infrastructure experiment is proposed. The method requires a high degree of interoperability among the participating partners and can be applied to extend the capacity as well as the degree of realism of advanced validation method such as co-simulation, remote hardware-in-the-loop or hybrid simulation. The proposed method is applied to a case study of multi-agent system based control for islanded microgrid where real devices from one platform is integrated to real-time simulation and control platform in a distanced infrastructure, in a holistic experimental implementation.

[1]  Chris Develder,et al.  Combining Power and Communication Network Simulation for Cost-Effective Smart Grid Analysis , 2014, IEEE Communications Surveys & Tutorials.

[2]  Peter Palensky,et al.  Cosimulation of Intelligent Power Systems: Fundamentals, Software Architecture, Numerics, and Coupling , 2017, IEEE Industrial Electronics Magazine.

[3]  Peter Palensky,et al.  Simulation-based Validation of Smart Grids - Status Quo and Future Research Trends , 2017, HoloMAS.

[4]  Peter Palensky,et al.  Cyber-physical energy systems modeling, test specification, and co-simulation based testing , 2017, 2017 Workshop on Modeling and Simulation of Cyber-Physical Energy Systems (MSCPES).

[5]  Mathias Uslar,et al.  CIMbaT - automated generation of CIM-based OPC UA-address spaces , 2011, 2011 IEEE International Conference on Smart Grid Communications (SmartGridComm).

[6]  Peter Palensky,et al.  Hybrid Simulation Using SAHISim Framework , 2015 .

[7]  Blake Lundstrom,et al.  Trans-oceanic Remote Power Hardware-in-the-Loop: Multi-site Hardware, Integrated Controller, and Electric Network Cosimulation , 2017 .

[8]  Blake Lundstrom,et al.  Evaluation of system-integrated smart grid devices using software- and hardware-in-the-loop , 2016, 2016 IEEE Power & Energy Society Innovative Smart Grid Technologies Conference (ISGT).

[9]  Sebastian Rohjans,et al.  Standardized Smart Grid Semantics using OPC UA for Communication , 2011, Int. J. Interoperability Bus. Inf. Syst..

[10]  Tung Lam Nguyen,et al.  On Conceptual Structuration and Coupling Methods of Co-Simulation Frameworks in Cyber-Physical Energy System Validation , 2017 .

[11]  Yvon Besanger,et al.  CIM and OPC UA for interoperability of micro-grid platforms , 2016, 2016 IEEE Power & Energy Society Innovative Smart Grid Technologies Conference (ISGT).

[12]  Quoc Tuan Tran,et al.  SCADA as a service approach for interoperability of micro-grid platforms , 2016 .

[13]  Karl Schoder,et al.  Characteristics and Design of Power Hardware-in-the-Loop Simulations for Electrical Power Systems , 2016, IEEE Transactions on Industrial Electronics.