Data for figures in "Low cycle fatigue life prediction in shot-peened components of different geometries – Part I Residual stress relaxation"

This dataset reports data for the figures published in: C. You, M. Achintha, K.A. Soady, N. Smyth, M.E. Fitzpatrick, P.A.S Reed "Low cycle fatigue life prediction in shot-peened components of different geometries – Part I Residual stress relaxation"The excel files included in this dataset were named in terms of the number of figures. Each excel file refers to a figure in the paper.

[1]  Michael E. Fitzpatrick,et al.  Application of the Eigenstrain Theory to Predict Residual Stress around Curved Edges after Laser Shock Peening , 2013 .

[2]  K. Soady,et al.  Life assessment methodologies incoroporating shot peening process effects: mechanistic consideration of residual stresses and strain hardening Part 1 – effect of shot peening on fatigue resistance , 2013 .

[3]  M. Sticchi,et al.  Application of the eigenstrain approach to predict the residual stress distribution in laser shock peened AA7050-T7451 samples , 2015 .

[4]  Lars-Erik Svensson,et al.  Stability of shot peening induced residual stresses and their influence on fatigue lifetime , 2011 .

[5]  Gary R. Halford,et al.  Investigation of residual stress relaxation under cyclic load , 2001 .

[6]  B. Scholtes,et al.  INFLUENCE OF SHOT VELOCITY AND SHOT SIZE ON ALMEN INTENSITY AND RESIDUAL STRESS DEPTH DIS , 2007 .

[7]  M. R. Hill,et al.  Eigenstrain-based model for prediction of laser peening residual stresses in arbitrary three-dimensional bodies Part 2: Model verification , 2009 .

[8]  W. Ding,et al.  An eigenstrain-based finite element model and the evolution of shot peening residual stresses during fatigue of GW103 magnesium alloy , 2012 .

[9]  Alexander M. Korsunsky,et al.  Residual elastic strain due to laser shock peening: Modelling by eigenstrain distribution , 2006 .

[10]  L. Wagner,et al.  Mechanical surface treatments on titanium, aluminum and magnesium alloys , 1999 .

[11]  Rachel C. Thomson,et al.  Assessment of surface hardening effects from shot peening on a Ni-based alloy using electron backscatter diffraction techniques , 2011 .

[12]  K. A. Soady.  Reducing conservatism in life assessment approaches: industrial steam turbine blade to disc interfaces and the shot peening process , 2013 .

[13]  M. Preuss,et al.  Stress relaxation of shot-peened UDIMET 720Li under solely elevated-temperature exposure and under isothermal fatigue , 2005 .

[14]  E. Macherauch,et al.  Residual stress relaxation in an AISI 4140 steel due to quasistatic and cyclic loading at higher temperatures , 1998 .

[15]  Alexander M. Korsunsky,et al.  Variational eigenstrain analysis of residual stresses in a welded plate , 2007 .

[16]  Philip J. Withers,et al.  Eigenstrain modelling of residual stress generated by arrays of laser shock peening shots and determination of the complete stress field using limited strain measurements , 2013 .

[17]  J. Chaboche.  Time-independent constitutive theories for cyclic plasticity , 1986 .

[18]  Berthold Scholtes,et al.  Cyclic deformation and near surface microstructures of shot peened or deep rolled austenitic stainless steel AISI 304 , 1999 .

[19]  David Nowell,et al.  Eigenstrain modelling of residual stresses generated by laser shock peening , 2011 .

[20]  Alexander M. Korsunsky,et al.  The modelling of residual stresses due to surface peening using eigenstrain distributions , 2005 .

[21]  Vigilio Fontanari,et al.  Numerical Simulation of Residual Stress Relaxation in Shot Peened High-Strength Aluminum Alloys Under Reverse Bending Fatigue , 2010 .

[22]  Ramana V. Grandhi,et al.  Differences in plasticity due to curvature in laser peened components , 2013 .

[23]  Mithila Achintha,et al.  Stress Relaxation in Shot-Peened Geometric Features Subjected to Fatigue: Experiments and Modelling , 2014 .