Application of Artificial Bee Colony Algorithm for Optimization of MRR and Surface Roughness in EDM of EN31 Tool Steel

Abstract The objective of this paper is to find out the combination of process parameters for optimum surface roughness and material removal rate (MRR) in electro discharge machining (EDM) of EN31 tool steel using artificial bee colony (ABC) algorithm. For experimentation, machining parameters viz., pulse on time, pulse off time, discharge current and voltage are varied based on central composite design (CCD). Second order response equations for MRR and surface roughness are found out using response surface methodology (RSM). For optimization, both single and multi-objective responses (MRR and surface roughness: Ra) are considered. From ABC analysis, the optimum combinations of process parameters are obtained and corresponding values of maximum MRR and minimum Ra are found out. Confirmation tests are carried out to validate the analyses and it is seen that the predicated values show good agreement with the experimental results. This study also investigates the influence of the machining parameters on machining performances. It is seen that with an increase in current and pulse on time, MRR and surface roughness increase in the experimental regime. Finally, surface morphology of machined surfaces is studied using scanning electron microscope (SEM) images.

[1]  A. G. Jaharah,et al.  PERFORMANCE OF COPPER ELECTRODE IN ELECTICAL DISCHARGE MACHINING (EDM) OF AISI H13 HARDEN STEEL , 2008 .

[2]  Dervis Karaboga,et al.  AN IDEA BASED ON HONEY BEE SWARM FOR NUMERICAL OPTIMIZATION , 2005 .

[3]  K. Palanikumar,et al.  Influence of process parameters on electric discharge machining of WC/30%Co composites , 2008 .

[4]  P. Sahoo.  Fractal characterization and optimization of electroless Ni–P coatings , 2008 .

[5]  G. Krishna Mohana Rao,et al.  DEVELOPMENT OF HYBRID MODEL AND OPTIMIZATION OF METAL REMOVAL RATE IN ELECTRIC DISCHARGE MACHINING USING ARTIFICIAL NEURAL NETWORKS AND GENETIC ALGORITHM , 2008 .

[6]  Rajesh Choudhary,et al.  Analysis of electro discharge machined surfaces of EN-31 tool steel , 2008 .

[7]  Yan Cherng Lin,et al.  Surface Improvement Using a Combination of Electrical Discharge Machining with Ball Burnish Machining Based on the Taguchi Method , 2001 .

[8]  A. Rajadurai,et al.  Influence of EDM process parameters in deep hole drilling of Inconel 718 , 2008 .

[9]  Mohan Kumar Pradhan,et al.  Comparisons of neural network models on surface roughness in electrical discharge machining , 2009 .

[10]  Mehmet Çunkas,et al.  Modeling and prediction of surface roughness in turning operations using artificial neural network and multiple regression method , 2011, Expert Syst. Appl..

[11]  Elman C Jameson,et al.  Electrical Discharge Machining , 2001 .

[12]  Stephen T. Newman,et al.  State of the art electrical discharge machining (EDM) , 2003 .

[13]  Ko-Ta Chiang,et al.  Modeling and analysis of the effects of machining parameters on the performance characteristics in the EDM process of Al2O3+TiC mixed ceramic , 2008 .

[14]  Ramezanali Mahdavinejad,et al.  Optimisation of electro discharge machining parameters , 2008 .

[15]  P. J. Pawar,et al.  Modelling and optimization of process parameters of wire electrical discharge machining , 2009 .

[16]  Y Chen,et al.  Analysis of electro-discharge machining process and its comparison with experiments , 2000 .

[17]  Prasanta Sahoo,et al.  Optimization of Surface Roughness and MRR in EDM Using WPCA , 2013 .

[18]  P. J. Pawar,et al.  Multi-objective optimization of electrochemical machining process parameters using a particle swarm optimization algorithm , 2008 .

[19]  I. Puertas,et al.  Analysis of the influence of EDM parameters on surface quality, MRR and EW of WC–Co , 2004 .

[20]  Mohd Amri Lajis,et al.  The implementation of Taguchi method on EDM process of Tungsten Carbide , 2009 .