Multi-scale process simulation for additive manufacturing through particle filled vat photopolymerization

[1]  Luca Paolini,et al.  Models , 2021, Encyclopedia of Gerontology and Population Aging.

[2]  Mohammad Mahdi Emami,et al.  An improved VAT photopolymerization cure model demonstrates photobleaching effects , 2020 .

[3]  G. Baars,et al.  Investigation of the fluid flow during the recoating process in additive manufacturing , 2019 .

[4]  B. de Jager,et al.  Real-time feedback controlled conversion in vat photopolymerization of ceramics: A proof of principle , 2019, Additive Manufacturing.

[5]  J.A.W. van Dommelen,et al.  Influence of particle shape in the additive manufacturing process for ceramics , 2019, Comput. Math. Appl..

[6]  Zhi-Gang Lu,et al.  Effect of light attenuation on polymerization of ceramic suspensions for stereolithography , 2019, Journal of the European Ceramic Society.

[7]  Jing Zhao,et al.  Mechanical property modeling of photosensitive liquid resin in stereolithography additive manufacturing: Bridging degree of cure with tensile strength and hardness , 2019, Materials & Design.

[8]  Bram de Jager,et al.  A feasibility study on process monitoring and control in vat photopolymerization of ceramics , 2018, Mechatronics.

[9]  M. Geers,et al.  Multiphysical modeling of the photopolymerization process for additive manufacturing of ceramics , 2018, European Journal of Mechanics - A/Solids.

[10]  T. K. Kundra,et al.  Additive Manufacturing Technologies , 2018 .

[11]  T. Chartier,et al.  Development of a numerical simulation model for predicting the curing of ceramic systems in the stereolithography process , 2018, Journal of the European Ceramic Society.

[12]  A. Menzel,et al.  Computational homogenisation for thermoviscoplasticity: application to thermally sprayed coatings , 2017 .

[13]  Uli Lemmer,et al.  CELES: CUDA-accelerated simulation of electromagnetic scattering by large ensembles of spheres , 2017, 1706.02145.

[14]  Xin Wang,et al.  3D printing of polymer matrix composites: A review and prospective , 2017 .

[15]  Simon Foster,et al.  Optics , 1981, Arch. Formal Proofs.

[16]  John W. Halloran,et al.  Ceramic Stereolithography: Additive Manufacturing for Ceramics by Photopolymerization , 2016 .

[17]  Paolo Colombo,et al.  Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities , 2015 .

[18]  Mgd Marc Geers,et al.  Thermo-mechanical analyses of heterogeneous materials with a strongly anisotropic phase: the case of cast iron , 2015 .

[19]  John W. Halloran,et al.  Light scattering in absorbing ceramic suspensions: Effect on the width and depth of photopolymerized features , 2015 .

[20]  Yong Huang,et al.  Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations , 2015 .

[21]  Ian Gibson,et al.  Additive manufacturing technologies : 3D printing, rapid prototyping, and direct digital manufacturing , 2015 .

[22]  Wolfgang Wachter,et al.  Light curing strategies for lithography-based additive manufacturing of customized ceramics , 2014 .

[23]  Tao Wu.  Theoretical modeling and experimental characterization of stress and crack development in parts manufactured through large area maskless photopolymerization , 2014 .

[24]  J. Halloran,et al.  Absorption effects in photopolymerized ceramic suspensions , 2013 .

[25]  R. Taylor,et al.  A multiscale finite element method for modeling fully coupled thermomechanical problems in solids , 2012 .

[26]  C. Kloss,et al.  Models, algorithms and validation for opensource DEM and CFD-DEM , 2012 .

[27]  Dong-Woo Cho,et al.  A pixel based solidification model for projection based stereolithography technology , 2012 .

[28]  David W. Rosen,et al.  Modeling effects of oxygen inhibition in mask‐based stereolithography , 2011 .

[29]  J. Halloran,et al.  Critical energy for photopolymerization of ceramic suspensions in acrylate monomers , 2010 .

[30]  John W. Halloran,et al.  Predictive models for the photopolymerization of ceramic suspensions , 2010 .

[31]  Aparna Boddapati.  MODELING CURE DEPTH DURING PHOTOPOLYMERIZATION OF MULTIFUNCTIONAL ACRYLATES , 2010 .

[32]  David W. Rosen,et al.  Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing , 2009 .

[33]  W. Brekelmans,et al.  FE2 computational homogenization for the thermo-mechanical analysis of heterogeneous solids , 2008 .

[34]  M. Geers,et al.  Computational homogenization for heat conduction in heterogeneous solids , 2008 .

[35]  S. Oh,et al.  Photopolymerization and photobleaching of n-butyl acrylate/fumed silica composites monitored by real time FTIR-ATR spectroscopy , 2006 .

[36]  Cho‐Pei Jiang,et al.  Dynamic finite element analysis of photopolymerization in stereolithography , 2006 .

[37]  D. Watts.  Reaction kinetics and mechanics in photo-polymerised networks. , 2005, Dental materials : official publication of the Academy of Dental Materials.

[38]  Xiang Zhang,et al.  Diffusion-limited photopolymerization in scanning micro-stereolithography , 2004 .

[39]  D. Rosen,et al.  Stereolithography Cure Process Modeling Using Acrylate Resin , 2004 .

[40]  Y.-M. Huang,et al.  Fundamental study and theoretical analysis in a constrained-surface stereolithography system , 2004 .

[41]  Lijing Gou,et al.  Modeling of photobleaching for the photoinitiation of thick polymerization systems , 2002 .

[42]  C. Bowman,et al.  Development of a comprehensive free radical photopolymerization model incorporating heat and mass transfer effects in thick films , 2002 .

[43]  Arne J. Pearlstein,et al.  Effects of Optical Attenuation and Consumption of a Photobleaching Initiator on Local Initiation Rates in Photopolymerizations , 2001 .

[44]  C. Decker,et al.  Kinetic study of photoinitiated frontal polymerization , 2001 .

[45]  T. Hinnerichs,et al.  A phenomenological finite element model of stereolithography processing , 1996 .

[46]  Steven G. Johnson,et al.  Photonic Crystals: Molding the Flow of Light , 1995 .

[47]  K. Bathe.  Finite Element Procedures , 1995 .

[48]  Paul F. Jacobs,et al.  Rapid Prototyping & Manufacturing: Fundamentals of Stereolithography , 1992 .

[49]  R. G. Pinnick,et al.  Relation between absorption coefficient and imaginary index of atmospheric aerosol constituents. , 1979, Applied optics.

[50]  Roland W. Lewis,et al.  Finite element solution of non‐linear heat conduction problems with special reference to phase change , 1974 .