Growth and setting of gas bubbles in a viscoelastic matrix imaged by X-ray microtomography: the evolution of cellular structures in fermenting wheat flour dough.

X-ray tomography is a relevant technique for the dynamic follow-up of gas bubbles in an opaque viscoelastic matrix, especially using image analysis. It has been applied here to pieces of fermenting wheat flour dough of various compositions, at two different voxel sizes (15 and 5 μm). The resulting evolution of the main cellular features shows that the creation of cellular structures follows two regimes that are defined by a characteristic time of connectivity, tc [30 and 80 min]: first (t ≤ tc), bubbles grow freely and then (t ≥ tc) they become connected since the percolation of the gas phase is limited by liquid films. During the first regime, bubbles can be tracked and the local strain rate can be measured. Its values (10(-4)-5 × 10(-4) s(-1)) are in agreement with those computed from dough viscosity and internal gas pressure, both of which depend on the composition. For higher porosity, P = 0.64 in our case, and thus occurring in the second regime, different cellular structures are obtained and XRT images show deformed gas cells that display complex shapes. The comparison of these images with confocal laser scanning microscopy images suggests the presence of liquid films that separate these cells. The dough can therefore be seen as a three-phase medium: viscoelastic matrix/gas cell/liquid phase. The contributions of the different levels of matter organization can be integrated by defining a capillary number (C = 0.1-1) that makes it possible to predict the macroscopic dough behavior.

[1]  G. D. Valle,et al.  Foaming and rheological properties of the liquid phase extracted from wheat flour dough , 2015 .

[2]  A. Donald,et al.  The Structure of the Gluten Network in Dough: a Study using Environmental Scanning Electron Microscopy , 1998 .

[3]  Hubert Chiron,et al.  Kinetics of bubble growth in wheat flour dough during proofing studied by computed X-ray micro-tomography , 2012 .

[4]  N. Ishida,et al.  Architecture of baked breads depicted by a magnetic resonance imaging. , 2001, Magnetic resonance imaging.

[5]  P. Ellis,et al.  Gas cell stabilisation and gas retention in wheat bread dough , 1995 .

[6]  Nikolaus Wellner,et al.  Composition and surface properties of dough liquor , 2006 .

[7]  M. Stampanoni,et al.  3D-characterization of three-phase systems using X-ray tomography: tracking the microstructural evolution in ice cream , 2012 .

[8]  T. Lucas,et al.  Measurement of local pressure during proving of bread dough sticks: Contribution of surface tension and dough viscosity to gas pressure in bubbles , 2010 .

[9]  P. Cloetens,et al.  X-ray tomography applied to the characterization of cellular materials. Related finite element modeling problems , 2003 .

[10]  H. Winter,et al.  Lubricated Squeezing Flow: A New Biaxial Extensional Rheometer , 1981 .

[11]  P. Bleuet,et al.  Advances in synchrotron hard X-ray based imaging , 2008 .

[12]  Martin G. Scanlon,et al.  The bubble size distribution in wheat flour dough , 2006 .

[13]  Peter Austin,et al.  It’s a maze: The pore structure of bread crumbs , 2011 .

[14]  Kamal Kansou,et al.  Porosity and stability of bread dough during proofing determined by video image analysis for different compositions and mixing conditions , 2010 .

[15]  P. Wilde,et al.  Surface properties and locations of gluten proteins and lipids revealed using confocal scanning laser microscopy in bread dough , 2004 .

[16]  Nicholas Crafts,et al.  Twentieth Century Growth*This research has received funding from the European Research Council under the European Union’s Seventh Framework Programme (FP7/2007-2013) / ERC grant agreement no. 249546.* , 2014 .

[17]  P. Cloetens,et al.  Characterisation by X-ray micro-tomography of cavity coalescence during superplastic deformation , 2000 .

[18]  J. G. Williams,et al.  Mechanical characterization and micromechanical modeling of bread dough. , 2013 .

[19]  R.G.M. van der Sman,et al.  The science of food structuring , 2009 .

[20]  Pieter Walstra,et al.  STRAIN-HARDENING OF DOUGH AS A REQUIREMENT FOR GAS RETENTION , 1992 .

[21]  Gerardo Toraldo,et al.  Description of leavening of bread dough with mathematical modelling , 2007 .

[22]  Dominique Langevin,et al.  Link between surface elasticity and foam stability , 2009 .

[23]  Martin G. Scanlon,et al.  Bread properties and crumb structure , 2001 .

[24]  Hubert Chiron,et al.  Fast X-ray tomography analysis of bubble growth and foam setting during breadmaking , 2006 .

[25]  P. Falcone,et al.  A novel approach to the study of bread porous structure: Phase-contrast X-ray microtomography , 2004 .

[26]  S. Advani,et al.  Diffusion-induced growth of a gas bubble in a viscoelastic fluid , 1991 .

[27]  Pierre Soille,et al.  Morphological Image Analysis , 1999 .