Grinding performance and surface integrity of particulate-reinforced titanium matrix composites in creep-feed grinding

[1]  Tianyu Yu,et al.  Grinding performance of textured monolayer CBN wheels: Undeformed chip thickness nonuniformity modeling and ground surface topography prediction , 2017 .

[2]  A. Chandra,et al.  Experimental and modeling characterization of wear and life expectancy of electroplated CBN grinding wheels , 2017 .

[3]  Xipeng Xu,et al.  Development of a brazed diamond wire for slicing single-crystal SiC ingots , 2017 .

[4]  Jiu-hua Xu,et al.  High speed grinding of particulate reinforced titanium matrix composites using a monolayer brazed cubic boron nitride wheel , 2017 .

[5]  Tianyu Yu,et al.  Investigation on stress distribution and wear behavior of brazed polycrystalline cubic boron nitride superabrasive grains: Numerical simulation and experimental study , 2017 .

[6]  Abhijit Chandra,et al.  Chemical mechanical paired grinding: a tool for multi-wavelength planarization , 2017 .

[7]  Tianyu Yu,et al.  Influence of grain wear on material removal behavior during grinding nickel-based superalloy with a single diamond grain , 2017 .

[8]  M. Balazinski,et al.  Initial tool wear behavior during machining of titanium metal matrix composite (TiMMCs) , 2016 .

[9]  Yucan Fu,et al.  Comparative investigation on high-speed grinding of TiCp/Ti–6Al–4V particulate reinforced titanium matrix composites with single-layer electroplated and brazed CBN wheels , 2016 .

[10]  Abhijit Chandra,et al.  Performance and modeling of paired polishing process , 2016 .

[11]  Lairong Yin,et al.  Investigation of the flow field for a double-outlet nozzle during minimum quantity lubrication grinding , 2016 .

[12]  Changhe Li,et al.  Improvement of useful flow rate of grinding fluid with simulation schemes , 2016 .

[13]  Biao Zhao,et al.  Comparative study on cutting behavior of vitrified cubic boron nitride wheel and electroplated cubic boron nitride wheel in high-speed grinding of (TiCp + TiBw)/Ti-6Al-4V composites , 2016 .

[14]  Kun-yang Lin,et al.  Tool wear mechanisms for milling in situ TiB2 particle-reinforced Al matrix composites , 2016 .

[15]  D. Aspinwall,et al.  Creep feed grinding of γ-TiAl using single layer electroplated diamond superabrasive wheels , 2015 .

[16]  A. Chandra,et al.  Modeling Wear Process of Electroplated CBN Grinding Wheel , 2015 .

[17]  Hongliang Ma,et al.  Simulation study on effect of cutting parameters and cooling mode on bone-drilling temperature field of superhard drill , 2015 .

[18]  Xipeng Xu,et al.  Experimental investigation on the machining characteristics of single-crystal SiC sawing with the fixed diamond wire , 2015, The International Journal of Advanced Manufacturing Technology.

[19]  Wenfeng Ding,et al.  Grinding temperature during high-efficiency grinding Inconel 718 using porous CBN wheel with multilayer defined grain distribution , 2015 .

[20]  K. Tang,et al.  Microstructure and mechanical properties of cBN-WC-Co composites used for cutting tools , 2015 .

[21]  Il-Young Kim,et al.  Microstructure and friction/wear behavior of (TiB+TiC) particulate-reinforced titanium matrix composites , 2014 .

[22]  Abhijit Chandra,et al.  Experimental Characterization of Electroplated CBN Grinding Wheel Wear: Topology Evolution and Interfacial Toughness , 2014 .

[23]  Jianbo Dai,et al.  A comparison between conventional speed grinding and super-high speed grinding of (TiCp + TiBw) / Ti–6Al–4V composites using vitrified CBN wheel , 2014 .

[24]  Su Honghua,et al.  Grindability and Surface Integrity of Cast Nickel-based Superalloy in Creep Feed Grinding with Brazed CBN Abrasive Wheels , 2010 .

[25]  R. Kang,et al.  Subsurface crystal lattice deformation machined by ultraprecision grinding of soft-brittle CdZnTe crystals , 2010 .

[26]  R. Kang,et al.  Nanoscale machinability and subsurface damage machined by CMP of soft-brittle CdZnTe crystals , 2010 .

[27]  P. Blau,et al.  Relationships Between Abrasive Wear, Hardness, and Grinding Characteristics of Titanium-Based Metal-Matrix Composites , 2009, Journal of Materials Engineering and Performance.

[28]  David K. Aspinwall,et al.  Creep feed grinding of a gamma titanium aluminide intermetallic alloy using SiC abrasives , 2007 .

[29]  David K. Aspinwall,et al.  Creep feed grinding of gamma titanium aluminide and burn resistant titanium alloys using SiC abrasive , 2007 .

[30]  Amir Abdullah,et al.  Profile wear of resin-bonded nickel-coated diamond wheel and roughness in creep-feed grinding of cemented tungsten carbide , 2007 .

[31]  Yoshio Ichida,et al.  Creep feed profile grinding of Ni-based superalloys with ultrafine-polycrystalline cBN abrasive grits , 2001 .

[32]  S. B. McSpadden,et al.  Wear mechanisms of diamond abrasives during transition and steady stages in creep-feed grinding of structural ceramics , 2000 .

[33]  Mofid Mahdi,et al.  Applied mechanics in grinding—VI. Residual stresses and surface hardening by coupled thermo-plasticity and phase transformation , 1998 .

[34]  Fritz Klocke,et al.  Abrasive machining of advanced aerospace alloys and composites , 2015 .

[35]  H. Attia,et al.  Laser assisted turning of Titanium Metal Matrix Composite , 2011 .

[36]  Stephen Malkin,et al.  Grinding Technology: Theory and Applications of Machining with Abrasives , 1989 .