Soft-Matter Printed Circuit Board with UV Laser Micropatterning.

When encapsulated in elastomer, micropatterned traces of Ga-based liquid metal (LM) can function as elastically deformable circuit wiring that provides mechanically robust electrical connectivity between solid-state elements (e.g., transistors, processors, and sensor nodes). However, LM-microelectronics integration is currently limited by challenges in rapid fabrication of LM circuits and the creation of vias between circuit terminals and the I/O pins of packaged electronics. In this study, we address both with a unique layup for soft-matter electronics in which traces of liquid-phase Ga-In eutectic (EGaIn) are patterned with UV laser micromachining (UVLM). The terminals of the elastomer-sealed LM circuit connect to the surface mounted chips through vertically aligned columns of EGaIn-coated Ag-Fe2O3 microparticles that are embedded within an interfacial elastomer layer. The processing technique is compatible with conventional UVLM printed circuit board (PCB) prototyping and exploits the photophysical ablation of EGaIn on an elastomer substrate. Potential applications to wearable computing and biosensing are demonstrated with functional implementations in which soft-matter PCBs are populated with surface-mounted microelectronics.

[1]  D. Mckenzie,et al.  Exact modelling of cubic lattice permittivity and conductivity , 1977, Nature.

[2]  Y. Mendelson.  Pulse oximetry: theory and applications for noninvasive monitoring. , 1992, Clinical chemistry.

[3]  S. Gevorgian,et al.  CAD models for multilayered substrate interdigital capacitors , 1996 .

[4]  W. B. Murray,et al.  The peripheral pulse wave: Information overlooked , 1996, Journal of clinical monitoring.

[5]  V. Wagner,et al.  Efficacy of silver-coated fabric to prevent bacterial colonization and subsequent device-based biofilm formation. , 2000, Journal of biomedical materials research.

[6]  J. Rogers,et al.  Structural forms of single crystal semiconductor nanoribbons for high-performance stretchable electronics , 2007 .

[7]  P. Sheng,et al.  Characterizing and Patterning of PDMS‐Based Conducting Composites , 2007 .

[8]  J. Rogers,et al.  Stretchable Electronics: Materials Strategies and Devices , 2008 .

[9]  G. Whitesides,et al.  Eutectic gallium-indium (EGaIn): a moldable liquid metal for electrical characterization of self-assembled monolayers. , 2008, Angewandte Chemie.

[10]  J. Rogers,et al.  Medium-scale carbon nanotube thin-film integrated circuits on flexible plastic substrates , 2008, Nature.

[11]  G. Whitesides,et al.  Eutectic Gallium‐Indium (EGaIn): A Liquid Metal Alloy for the Formation of Stable Structures in Microchannels at Room Temperature , 2008 .

[12]  Yonggang Huang,et al.  Ultrathin Silicon Circuits With Strain‐Isolation Layers and Mesh Layouts for High‐Performance Electronics on Fabric, Vinyl, Leather, and Paper , 2009 .

[13]  Yonggang Huang,et al.  Materials and Mechanics for Stretchable Electronics , 2010, Science.

[14]  M. Madhusoothanan,et al.  Electrical Resistivity Studies on Polyaniline Coated Polyester Fabrics , 2010 .

[15]  H. Choi,et al.  Highly conductive, printable and stretchable composite films of carbon nanotubes and silver. , 2010, Nature nanotechnology.

[16]  M. Nogi,et al.  Printable and Stretchable Conductive Wirings Comprising Silver Flakes and Elastomers , 2011, IEEE Electron Device Letters.

[17]  Benjamin C. K. Tee,et al.  Skin-like pressure and strain sensors based on transparent elastic films of carbon nanotubes. , 2011, Nature nanotechnology.

[18]  Jianyong Ouyang,et al.  PEDOT:PSS films with significantly enhanced conductivities induced by preferential solvation with cosolvents and their application in polymer photovoltaic cells , 2011 .

[19]  Raeed H. Chowdhury,et al.  Epidermal Electronics , 2011, Science.

[20]  Zhigang Wu,et al.  Microfluidic electronics. , 2012, Lab on a chip.

[21]  Magnus Jobs,et al.  Liquid alloy printing of microfluidic stretchable electronics. , 2012, Lab on a chip.

[22]  Chang-Jin Kim,et al.  Characterization of Nontoxic Liquid-Metal Alloy Galinstan for Applications in Microdevices , 2012, Journal of Microelectromechanical Systems.

[23]  Jin-Woo Choi,et al.  Embedding conductive patterns of elastomer nanocomposite with the assist of laser ablation , 2012 .

[24]  J. Muth,et al.  3D Printing of Free Standing Liquid Metal Microstructures , 2013, Advanced materials.

[25]  Benjamin C. K. Tee,et al.  25th Anniversary Article: The Evolution of Electronic Skin (E‐Skin): A Brief History, Design Considerations, and Recent Progress , 2013, Advanced materials.

[26]  Carmel Majidi,et al.  Liquid-phase gallium-indium alloy electronics with microcontact printing. , 2013, Langmuir : the ACS journal of surfaces and colloids.

[27]  Rebecca K. Kramer,et al.  Masked Deposition of Gallium‐Indium Alloys for Liquid‐Embedded Elastomer Conductors , 2013 .

[28]  Guggi Kofod,et al.  Soft Conductive Elastomer Materials for Stretchable Electronics and Voltage Controlled Artificial Muscles , 2013, Advanced materials.

[29]  Daniel M. Vogt,et al.  Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers , 2014, Advanced materials.

[30]  M. Dickey,et al.  Self-Folding Origami Microstrip Antennas , 2014, IEEE Transactions on Antennas and Propagation.

[31]  Robert J. Wood,et al.  Wearable soft sensing suit for human gait measurement , 2014, Int. J. Robotics Res..

[32]  Wenqi Hu,et al.  Continuous Electrowetting of Non-toxic Liquid Metal for RF Applications , 2014, IEEE Access.

[33]  Shanliangzi Liu,et al.  Different shades of oxide: from nanoscale wetting mechanisms to contact printing of gallium-based liquid metals. , 2014, Langmuir : the ACS journal of surfaces and colloids.

[34]  Robert J. Wood,et al.  Mechanical and electrical numerical analysis of soft liquid-embedded deformation sensors analysis , 2014 .

[35]  Patrick J Codd,et al.  Novel pressure-sensing skin for detecting impending tissue damage during neuroendoscopy. , 2014, Journal of neurosurgery. Pediatrics.

[36]  James P. Wissman,et al.  Rapid Prototyping for Soft‐Matter Electronics , 2014 .

[37]  Robert J. Wood,et al.  Wrist angle measurements using soft sensors , 2014, IEEE SENSORS 2014 Proceedings.

[38]  Carmel Majidi,et al.  High‐Density Soft‐Matter Electronics with Micron‐Scale Line Width , 2014, Advanced materials.

[39]  Michael D. Dickey,et al.  Emerging Applications of Liquid Metals Featuring Surface Oxides , 2014, ACS applied materials & interfaces.

[40]  Rebecca K. Kramer,et al.  Direct Writing of Gallium‐Indium Alloy for Stretchable Electronics , 2014 .

[41]  J. Vörös,et al.  Stretchable electronics based on Ag-PDMS composites , 2014, Scientific Reports.

[42]  Lin Jia,et al.  Epidermal photonic devices for quantitative imaging of temperature and thermal transport characteristics of the skin , 2014, Nature Communications.

[43]  Taekeon Jung,et al.  Highly Stable Liquid Metal-Based Pressure Sensor Integrated with a Microfluidic Channel , 2015, Sensors.

[44]  Klas Hjort,et al.  Tape Transfer Atomization Patterning of Liquid Alloys for Microfluidic Stretchable Wireless Power Transfer , 2015, Scientific Reports.

[45]  Kamran Entesari,et al.  Miniature and Reconfigurable CPW Folded Slot Antennas Employing Liquid-Metal Capacitive Loading , 2015, IEEE Transactions on Antennas and Propagation.

[46]  S. Lacour,et al.  Soft flexion sensors integrating strechable metal conductors on a silicone substrate for smart glove applications , 2015, 2015 28th IEEE International Conference on Micro Electro Mechanical Systems (MEMS).

[47]  Sungjoon Lim,et al.  Frequency-switchable half-mode substrate-integrated waveguide antenna injecting eutectic gallium indium (EGaIn) liquid metal alloy , 2015 .

[48]  Jacob J. Adams,et al.  A reconfigurable liquid metal antenna driven by electrochemically controlled capillarity , 2015 .

[49]  Bumkyoo Choi,et al.  Improved Capacitive Pressure Sensors Based on Liquid Alloy and Silicone Elastomer , 2015, IEEE Sensors Journal.

[50]  Ryosuke Matsuzaki,et al.  Highly Stretchable, Global, and Distributed Local Strain Sensing Line Using GaInSn Electrodes for Wearable Electronics , 2015 .

[51]  Takao Someya,et al.  Printable elastic conductors with a high conductivity for electronic textile applications , 2015, Nature Communications.

[52]  Q. Wang,et al.  Fast Fabrication of Flexible Functional Circuits Based on Liquid Metal Dual‐Trans Printing , 2015, Advanced materials.

[53]  Ishan D. Joshipura,et al.  Methods to pattern liquid metals , 2015 .

[54]  Klas Hjort,et al.  Microfluidic Stretchable Radio-Frequency Devices , 2015, Proceedings of the IEEE.

[55]  Sungjoon Lim,et al.  Frequency-Switchable Metamaterial Absorber Injecting Eutectic Gallium-Indium (EGaIn) Liquid Metal Alloy , 2015, Sensors.

[56]  Xuan Wu,et al.  Selectively plated stretchable liquid metal wires for transparent electronics , 2015 .

[57]  Carmel Majidi,et al.  Soft Anisotropic Conductors as Electric Vias for Ga-Based Liquid Metal Circuits. , 2015, ACS applied materials & interfaces.

[58]  Bumkyoo Choi,et al.  Improved Capacitive Pressure Sensors Based on Liquid Alloy and Silicone Elastomer , 2015 .

[59]  Tong Lu,et al.  iSkin: Flexible, Stretchable and Visually Customizable On-Body Touch Sensors for Mobile Computing , 2015, CHI.

[60]  Jiming Song,et al.  Tunable meta-atom using liquid metal embedded in stretchable polymer , 2015 .

[61]  Bumkyoo Choi,et al.  Stretching and Twisting Sensing With Liquid-Metal Strain Gauges Printed on Silicone Elastomers , 2015, IEEE Sensors Journal.

[62]  Gregory H. Huff,et al.  Manipulating Liquid Metal Droplets in Microfluidic Channels With Minimized Skin Residues Toward Tunable RF Applications , 2015, Journal of Microelectromechanical Systems.

[63]  J. Bell,et al.  Localized Instabilities of Liquid Metal Films via In‐Plane Recapillarity , 2016 .

[64]  Jeong-Bong (JB) Lee,et al.  Liquid metal-based reconfigurable and stretchable photolithography , 2016 .

[65]  Xuan Wu,et al.  A galinstan-based inkjet printing system for highly stretchable electronics with self-healing capability. , 2016, Lab on a chip.

[66]  B. Gozen,et al.  Freeze‐Printing of Liquid Metal Alloys for Manufacturing of 3D, Conductive, and Flexible Networks , 2016 .

[67]  D. Sameoto,et al.  Fabrication methods and applications of microstructured gallium based liquid metal alloys , 2016 .

[68]  M. Kaltenbrunner,et al.  Ultraflexible organic photonic skin , 2016, Science Advances.

[69]  Carmel Majidi,et al.  Rapid Fabrication of Soft, Multilayered Electronics for Wearable Biomonitoring , 2016 .

[70]  Mark A. Reed,et al.  Electrical Characterization of Self-Assembled Monolayers , 2018, Nano and Molecular Electronics Handbook.