Static and dynamic failure behaviour of bolted joints in carbon fibre composites

Abstract An experimental test series of mechanically fastened bolted joints with countersunk head in quasi-isotropic carbon/epoxy composite laminates under quasi-static and dynamic loads with velocities up to 10 m/s has been conducted in order to investigate potential strain rate effects on the failure behaviour. The test campaign covered bolt pull-through tests, single lap shear tests with one and two bolts and coach peel tests. Identical test equipment has been used for the whole range of test velocities to avoid influences of different test machines. No rate sensitivity occurred for most test configurations. Only the single lap shear tests with two bolts showed a change of failure mode at the highest test velocity enabling higher energy absorption.

[1]  Srinivasa D. Thoppul,et al.  Mechanics of mechanically fastened joints in polymer–matrix composite structures – A review , 2009 .

[2]  R. S. Thomson,et al.  Fastener pull-through in a carbon fibre epoxy composite joint , 2008 .

[3]  Christophe Bouvet,et al.  Discrete ply model of circular pull-through test of fasteners in laminates , 2012 .

[4]  Bertrand Langrand,et al.  Détermination expérimentale du comportement mécanique et de critère de rupture d'assemblages sous chargements mixtes. Application aux rivets et points soudés , 2003 .

[5]  G. N. Labeas,et al.  Strength prediction of bolted joints in graphite/epoxy composite laminates , 2002 .

[6]  G. S. Ger,et al.  DYNAMIC TENSILE STRENGTH OF COMPOSITE LAMINATE JOINTS FASTENED MECHANICALLY , 1996 .

[7]  Rodney S. Thomson,et al.  Experimental Investigation of Dynamically Loaded Bolted Joints in Carbon Fibre Composite Structures , 2010 .

[8]  J. Maire,et al.  Progressive damage and failure of mechanically fastened joints in CFRP laminates – Part I: Refined Finite Element modelling of single-fastener joints , 2012 .

[9]  A. Beevers,et al.  Analysis of stiffness of adhesive joints in car bodies , 2001 .

[10]  Eric Markiewicz,et al.  Riveted joint modeling for numerical analysis of airframe crashworthiness , 2001 .

[11]  Eric Markiewicz,et al.  An alternative numerical approach for full scale characterisation for riveted joint design , 2002 .

[12]  Peter Middendorf,et al.  Integration of a Composite Crash Absorber in Aircraft Fuselage Vertical Struts , 2011 .

[13]  Ali Fatemi,et al.  An experimental investigation of deformation and fatigue behavior of coach peel riveted joints , 2006 .

[14]  Guy Gendron,et al.  Stress and failure analysis of mechanically fastened joints in composite laminates , 2000 .

[15]  Eric Markiewicz,et al.  Full scale experimental characterisation for riveted joint design , 2002 .

[16]  Johan Ekh,et al.  Load Transfer in Multirow, Single Shear, Composite-to-Aluminium Lap Joints , 2006 .

[17]  Norman Jones,et al.  Influence of spot-weld failure on crushing of thin-walled structural sections , 2003 .

[18]  Eric Markiewicz,et al.  Numerical approach for assessment of dynamic strength for riveted joints , 1999 .

[19]  Isaac M Daniel,et al.  Strain Rate Effects on the Transverse Compressive and Shear Behavior of Unidirectional Composites , 1999 .

[20]  M. A. McCarthy,et al.  Stress analysis of single-bolt, single-lap, countersunk composite joints with variable bolt-hole clearance , 2012 .

[21]  Rodney S. Thomson,et al.  Numerical analysis of damage progression and strength of countersunk composite joints , 2012 .

[22]  J. Maire,et al.  Progressive damage and failure of mechanically fastened joints in CFRP laminates – Part II: Failure prediction of an industrial junction , 2012 .

[23]  Pedro P. Camanho,et al.  Stress analysis and strength prediction of mechanically fastened joints in FRP: A review , 1997 .

[24]  Conor T. McCarthy,et al.  A highly efficient user-defined finite element for load distribution analysis of large-scale bolted composite structures , 2011 .

[25]  Peter Middendorf,et al.  Strain rate effects in phenolic composites and phenolic-impregnated honeycomb structures , 2007 .

[26]  Rodney S. Thomson,et al.  Experimental investigation of damage progression and strength of countersunk composite joints , 2012 .

[27]  R. S. Birch,et al.  Dynamic failure of structural joint systems , 2000 .

[28]  P. Camanho,et al.  Experimental and numerical study of fastener pull-through failure in GFRP laminates , 2011 .

[29]  R. L. Sierakowski,et al.  Strain Rate Effects in Composites , 1997 .

[30]  Joakim Schön,et al.  Quasi-static behaviour of composite joints with protruding-head bolts , 2001 .

[31]  Don Kelly,et al.  A study of fastener pull-through failure of composite laminates. Part 1: Experimental , 1999 .

[32]  R. S. Birch,et al.  Static and dynamic behaviour of composite riveted joints in tension , 2001 .

[33]  Alain Combescure,et al.  Non-linear and failure behaviour of spotwelds: a “global” finite element and experiments in pure and mixed modes I/II , 2004 .

[34]  Lorenzo Iannucci,et al.  Pull-through performance of carbon fibre epoxy composites , 2012 .

[35]  Tomas Ireman,et al.  On damage development in mechanically fastened composite laminates , 2000 .

[36]  Don Kelly,et al.  A study of fastener pull-through failure of composite laminates. Part 2: Failure prediction , 1999 .