Effect of materials and modelling on the design of the space-based lightweight mirror

Abstract This paper focused on the application of finite element analysis in the design and validation of a space-based lightweight mirror. Reaction-bonded silicon carbide (RB SiC) and silicon carbide particle reinforced aluminum matrix composites (SiC p /Al) were selected as candidate materials for the mirror, and the finite element model created by discretizing the mirror assembly was employed to predict the performance of the mirror. The results indicated that RB SiC offered more excellent characteristics relative to other traditional materials and was a better candidate for space application in comparison with SiC p /Al.

[1]  C. Dispenza,et al.  Numerical simulations of the mechanical characteristics of glass fibre reinforced C-profiles , 2006 .

[2]  H. Philip Stahl,et al.  Cryogenic performance of lightweight SiC and C/SiC mirrors , 2004, SPIE Astronomical Telescopes + Instrumentation.

[3]  S. Moseley,et al.  Cryogenic detectors for infrared astronomy: the Single Aperture Far-InfraRed (SAFIR) Observatory , 2004 .

[4]  Peter A. Jones,et al.  Cryogenic performance of a passive lightweight mirror , 1998, Astronomical Telescopes and Instrumentation.

[5]  P. S. Carlin.  Lightweight mirror systems for spacecraft-an overview of materials and manufacturing needs , 2000, 2000 IEEE Aerospace Conference. Proceedings (Cat. No.00TH8484).

[6]  Qiang Zhang,et al.  The thermal expansion and mechanical properties of high reinforcement content SiCp/Al composites fabricated by squeeze casting technology , 2003 .

[7]  F. Sen,et al.  Transient thermal stress analysis of CeO2 thin films on Ni substrates using finite element methods for YBCO coated conductor , 2007 .

[8]  James H. Burge,et al.  Ultralightweight active mirror technology at the University of Arizona , 2001, SPIE Optics East.

[9]  Joseph M. Howard,et al.  Focus determination for the James Webb Space Telescope science instruments: a survey of methods , 2006, SPIE Astronomical Telescopes + Instrumentation.

[10]  Ian J. Saunders,et al.  Fabrication and metrology of freeform aluminum mirrors for the SCUBA-2 instrument , 2005, SPIE Optics + Photonics.

[11]  Elena Bozhevolnaya,et al.  Local effects at core junctions of sandwich structures under different types of loads , 2006 .

[12]  Yumin Zhang,et al.  Large-scale fabrication of lightweight Si/SiC ceramic composite optical mirror , 2004 .

[13]  Qiang Zhang,et al.  Thermal expansion and dimensional stability of Al–Si matrix composite reinforced with high content SiC , 2003 .

[14]  James H. Burge,et al.  Demonstration of a 0.5-m ultralightweight mirror for use at geosynchronous orbit , 2001, Optics + Photonics.

[15]  Maxime Boccas,et al.  Protected-silver coatings for the 8-m Gemini telescope mirrors , 2006 .

[16]  B. J. Mac Donald,et al.  Experimental study and finite element analysis of simple X- and T-branch tube hydroforming processes , 2005 .

[17]  Takashi Onaka,et al.  SPICA: A 3.5 m space infrared telescope for mid- and far-infrared astronomy , 2004 .

[18]  Bernardo Zuccarello,et al.  Experimental and numerical evaluation of the mechanical behaviour of GFRP sandwich panels , 2007 .