Dynamic and Kinematic Characteristics of Unsteady Motion of a Water-in-Oil Emulsion Droplet in Collision with a Solid Heated Wall Under Conditions of Convective Heat Transfer

[1]  M. Piskunov,et al.  Effects of wall temperature and temperature-dependent viscosity on maximum spreading of water-in-oil emulsion droplet , 2022, International Journal of Heat and Mass Transfer.

[2]  Yongping Chen,et al.  Experimental study on the electrohydrodynamic deformation of droplets in a combined DC electric field and shear flow field , 2021, Fundamental research.

[3]  V. Yanovsky,et al.  Effect of rheology and interfacial tension on spreading of emulsion drops impacting a solid surface , 2021, Physics of Fluids.

[4]  C. Tropea,et al.  Secondary atomization of water-in-oil emulsion drops impinging on a heated surface in the film boiling regime , 2021 .

[5]  P. Strizhak,et al.  Convective heat transfer in droplets of fuel microemulsions during conductive heating , 2021 .

[6]  T. Kamperman,et al.  Continuous High‐Throughput Fabrication of Architected Micromaterials via In‐Air Photopolymerization , 2020, Advanced materials.

[7]  P. Massoli,et al.  Investigation on the conditions leading to the micro-explosion of emulsified fuel droplet using two colors LIF method , 2020, Experimental Thermal and Fluid Science.

[8]  G. Nyashina,et al.  Impact of micro-explosive atomization of fuel droplets on relative performance indicators of their combustion , 2020 .

[9]  A. Sreenivasan,et al.  Splashing of fuel drops impacting on heated solid surfaces , 2020 .

[10]  W. Yan,et al.  Properties and Phase Behavior of Water-in-Diesel Microemulsion Fuels Stabilized by Nonionic Surfactants in Combination with Aliphatic Alcohol , 2020 .

[11]  V. Yanovsky,et al.  Secondary Atomization of a Biodiesel Micro-Emulsion Fuel Droplet Colliding with a Heated Wall , 2020, Applied Sciences.

[12]  I. Roisman,et al.  Thermal stability control of the water-in-diesel microemulsion fuel produced by using a nonionic surfactant combined with aliphatic alcohols , 2020, Journal of Dispersion Science and Technology.

[13]  N. Shlegel,et al.  Atomization of promising multicomponent fuel droplets by their collisions , 2019, Fuel.

[14]  D. K. Mandal,et al.  Impact of emulsion drops on a solid surface: The effect of viscosity , 2019, Physics of Fluids.

[15]  S. Kong,et al.  Multicomponent drop breakup during impact with heated walls , 2019, International Journal of Heat and Mass Transfer.

[16]  C. Bain,et al.  Fabrication of monolayers of uniform polymeric particles by inkjet printing of monodisperse emulsions produced by microfluidics. , 2019, Lab on a chip.

[17]  D. Sivakumar,et al.  Fuel drop impact on heated solid surface in film evaporation regime , 2019, Chemical Engineering Science.

[18]  G. Brenn,et al.  Transport Phenomena Across Interfaces of Complex Fluids: Drops and Sprays , 2019 .

[19]  R. Volkov,et al.  Interaction of two drops at different temperatures: The role of thermocapillary convection and surfactant , 2018, Colloids and Surfaces A: Physicochemical and Engineering Aspects.

[20]  S. Misyura.  The influence of characteristic scales of convection on non-isothermal evaporation of a thin liquid layer , 2018, Scientific Reports.

[21]  S. Misyura.  The Anomalously High Rate of Crystallization, Controlled by Crystal Forms under the Conditions of a Limited Liquid Volume , 2018 .

[22]  Detlef Lohse,et al.  In-air microfluidics enables rapid fabrication of emulsions, suspensions, and 3D modular (bio)materials , 2018, Science Advances.

[23]  Mingfa Yao,et al.  A numerical study of spray/wall impingement based on droplet impact phenomenon , 2017 .

[24]  E. J. Vega,et al.  Suppressing prompt splash with polymer additives , 2017 .

[25]  Issam Mudawar,et al.  Review of drop impact on heated walls , 2017 .

[26]  Ali Khademhosseini,et al.  Single Cell Microgel Based Modular Bioinks for Uncoupled Cellular Micro‐ and Macroenvironments , 2017, Advanced healthcare materials.

[27]  Mohammad Omar Abdullah,et al.  Engine performance and emissions characteristics of a diesel engine fueled with diesel-biodiesel-bioethanol emulsions , 2017 .

[28]  K. Okazaki,et al.  Secondary atomization and spray flame characteristics of carbonated W/O emulsified fuel , 2016 .

[29]  A. Khademhosseini,et al.  From Nano to Macro: Multiscale Materials for Improved Stem Cell Culturing and Analysis. , 2016, Cell stem cell.

[30]  Rui L Reis,et al.  Towards the design of 3D multiscale instructive tissue engineering constructs: Current approaches and trends. , 2015, Biotechnology advances.

[31]  Ujjwal K. Saha,et al.  A comprehensive review on the application of emulsions as an alternative fuel for diesel engines , 2015 .

[32]  D. Sabatini,et al.  Ethanol-in-palm oil/diesel microemulsion-based biofuel: Phase behavior, viscosity, and droplet size , 2014 .

[33]  S. Lee,et al.  Spreading and receding characteristics of a non-Newtonian droplet impinging on a heated surface , 2014 .

[34]  D. Sivakumar,et al.  Experimental investigation of biofuel drop impact on stainless steel surface , 2014 .

[35]  D. Sabatini,et al.  Predicting the temperature-dependent viscosity of vegetable oil/diesel reverse microemulsion fuels , 2014 .

[36]  E. Sher,et al.  Experimental study on the dynamics of binary fuel droplet impacts on a heated surface , 2013 .

[37]  Yongping Chen,et al.  Hydrodynamics of double emulsion droplet in shear flow , 2013 .

[38]  J. Baek,et al.  Numerical study of the parameters governing the impact dynamics of yield-stress fluid droplets on a solid surface , 2012 .

[39]  Michael P. Brenner,et al.  The mechanism of a splash on a dry solid surface , 2011, Journal of Fluid Mechanics.

[40]  C. Wassgren,et al.  Non-Newtonian Drops Spreading on a Flat Surface , 2010 .

[41]  I. Roisman.  On the instability of a free viscous rim , 2010, Journal of Fluid Mechanics.

[42]  C. Tropea,et al.  Spray impact: Rim transverse instability initiating fingering and splash, and description of a secondary spray , 2006 .

[43]  C. Béguin,et al.  Maximal deformation of an impacting drop , 2004, Journal of Fluid Mechanics.

[44]  Marco Marengo,et al.  Time evolution of liquid drop impact onto solid, dry surfaces , 2002 .

[45]  S. Chandra,et al.  Parameters controlling solidification of molten wax droplets falling on a solid surface , 1999 .

[46]  B. Prunet-Foch,et al.  Impacting Emulsion Drop on a Steel Plate: Influence of the Solid Substrate☆ , 1998 .

[47]  M. Pasandideh-Fard,et al.  Capillary effects during droplet impact on a solid surface , 1996 .

[48]  C. Tropea,et al.  Droplet-wall collisions: Experimental studies of the deformation and breakup process , 1995 .

[49]  L. Tanner,et al.  The spreading of silicone oil drops on horizontal surfaces , 1979 .