Optimum design and performance evaluation of inerter‐based dampers for seismic protection of adjacent bridges

[1]  G. Alotta,et al.  Seismic protection of land-based wind turbine towers using the tuned inerter damper , 2023, Structures.

[2]  X. Long,et al.  Simplified design method of pounding-unseating-prevention device for LRB isolated continuous girder bridge , 2023, Structures.

[3]  S. Avila,et al.  A review on the use of the inerter device in the structural coupling technique for adjacent building vibration control , 2022, Structures.

[4]  K. Bi,et al.  Influence of spatially varying ground motions on the seismic responses of adjacent bridges coupled by a tuned inerter damper , 2022, Soil Dynamics and Earthquake Engineering.

[5]  Liyuan Cao,et al.  A high performance hybrid passive base‐isolated system , 2021, Structural Control and Health Monitoring.

[6]  Ping Tan,et al.  Response mitigation performance and energy dissipation enhancement of tuned viscous mass damper applied on adjacent structures , 2021 .

[7]  Rouzbeh Doroudi,et al.  Connection of coupled buildings: A state-of-the-art review , 2021 .

[8]  Salah Djerouni,et al.  Seismic response control of adjacent buildings using optimal backward-shared tuned mass damper inerter and optimal backward-shared tuned inerter damper , 2021, Asian Journal of Civil Engineering.

[9]  Hong Hao,et al.  Inerter-based structural vibration control: A state-of-the-art review , 2021 .

[10]  Kaiming Bi,et al.  Seismic responses of adjacent bridge structures coupled by tuned inerter damper , 2021 .

[11]  Billie F. Spencer,et al.  Viscous inertial mass damper (VIMD) for seismic responses control of the coupled adjacent buildings , 2021 .

[12]  D. De Domenico,et al.  Seismic performance of optimal Multi-Tuned Liquid Column Damper-Inerter (MTLCDI) applied to adjacent high-rise buildings , 2021 .

[13]  Yi Tang,et al.  Seismic response control of adjacent high-rise buildings linked by the Tuned Liquid Column Damper-Inerter (TLCDI) , 2020 .

[14]  Qinhua Wang,et al.  Inerter-based tuned liquid column damper for seismic vibration control of a single-degree-of-freedom structure , 2020 .

[15]  Qingjun Chen,et al.  Interaction of Two Adjacent Structures Coupled by Inerter-based System considering Soil Conditions , 2020, Journal of Earthquake Engineering.

[16]  Giuseppe Carlo Marano,et al.  Optimal design and seismic performance of Multi‐Tuned Mass Damper Inerter (MTMDI) applied to adjacent high‐rise buildings , 2020, The Structural Design of Tall and Special Buildings.

[17]  Seung-Yong Ok,et al.  Tuned mass damper asymmetric coupling system for vibration control of adjacent twin buildings , 2020, Advances in Structural Engineering.

[18]  Qiang Han,et al.  Performance evaluation of inerter‐based dampers for vortex‐induced vibration control of long‐span bridges: A comparative study , 2020, Structural Control and Health Monitoring.

[19]  Simon A Neild,et al.  Optimal design of a pair of vibration suppression devices for a multi‐storey building , 2019, Structural Control and Health Monitoring.

[20]  Maurizio De Angelis,et al.  Defective two adjacent single degree of freedom systems linked by spring-dashpot-inerter for vibration control , 2019, Engineering Structures.

[21]  Shixiong Zheng,et al.  Assessment on required separation length between adjacent bridge segments to avoid pounding , 2019, Soil Dynamics and Earthquake Engineering.

[22]  Hamid Reza Karimi,et al.  Design of inerter-based multi-actuator systems for vibration control of adjacent structures , 2019, J. Frankl. Inst..

[23]  Liyuan Cao,et al.  Tuned tandem mass dampers‐inerters with broadband high effectiveness for structures under white noise base excitations , 2019, Structural Control and Health Monitoring.

[24]  Luis Vela,et al.  Closed-form solutions for the optimal design of inerter-based dynamic vibration absorbers , 2018, International Journal of Mechanical Sciences.

[25]  Ruifu Zhang,et al.  Design of structure with inerter system based on stochastic response mitigation ratio , 2018 .

[26]  D. De Domenico,et al.  Soil-dependent optimum design of a new passive vibration control system combining seismic base isolation with tuned inerter damper , 2018 .

[27]  Hamid Reza Karimi,et al.  Advanced computational design of shared tuned mass-inerter dampers for vibration control of adjacent multi-story structures , 2017 .

[28]  R. S. Jangid,et al.  Vibration control of bridge subjected to multi-axle vehicle using multiple tuned mass friction dampers , 2016 .

[29]  Gebrail Bekdaş,et al.  Optimum tuned mass damper approaches for adjacent structures , 2014 .

[30]  Kohju Ikago,et al.  Seismic control of single‐degree‐of‐freedom structure using tuned viscous mass damper , 2012 .

[31]  Zifa Wang.  A preliminary report on the Great Wenchuan Earthquake , 2008 .

[32]  R. S. Jangid,et al.  EFFECTIVENESS OF SEISMIC ISOLATION FOR CABLE-STAYED BRIDGES , 2006 .

[33]  Nawawi Chouw,et al.  Study of SSI and non-uniform ground motion effect on pounding between bridge girders , 2005 .

[34]  Hengjia Zhu,et al.  Optimum parameters of Maxwell model-defined dampers used to link adjacent structures , 2005 .

[35]  John O Sobanjo,et al.  Use of a shared tuned mass damper (STMD) to reduce vibration and pounding in adjacent structures , 2001 .

[36]  Hongping Zhu,et al.  A study of response control on the passive coupling element between two parallel structures , 2000 .

[37]  Anne S. Kiremidjian,et al.  Statistical Analysis of Bridge Damage Data from the 1994 Northridge, CA, Earthquake , 1999 .

[38]  Bruce D. Westermo,et al.  The dynamics of interstructural connection to prevent pounding , 1989 .

[39]  Zhihao Wang,et al.  Optimum design of viscous inerter damper targeting multi-mode vibration mitigation of stay cables , 2021, Engineering Structures.

[40]  Liyuan Cao,et al.  Performance of multiple tuned mass dampers-inerters for structures under harmonic ground acceleration , 2020 .