Study on Fiber Weight Fraction Effect on Tensile Modulus of Polystyrene (PS) Composites Reinforced with Short Glass Fiber (SGF) Based on Their Fiber Orientation

In this study, the tensile modulus of injection molded SGF/PS composites is investigated. The experimental and simulation results show, increasing of tensile modulus of these composites, is inconsistent with increasing of fiber content in high fiber weight fraction. This inconstancy is more distinguishable for fiber weight fractions greater than 40%wt of GF. To explain away this observation, the fiber orientation tensor of molded part is simulated. The behavior of a11, the first orientation tensor component in filling flow direction, through the thickness of the part is obtained for different SGF/PS compositions. The consequent curves can explain the unexpected behavior and support this idea that the effects of fiber orientation should be considered in calculation of SFG composite properties.

[1]  J. Thomason.  The influence of fibre length and concentration on the properties of glass fibre reinforced polypropylene: 7. Interface strength and fibre strain in injection moulded long fibre PP at high fibre content , 2007 .

[2]  R. Bay,et al.  Fiber orientation in injection-molded composites: A comparison of theory and experiment , 1991 .

[3]  S. Fu,et al.  The elastic modulus of misaligned short-fiber-reinforced polymers , 1998 .

[4]  H. Laun.  Orientation effects and rheology of short glass fiber-reinforced thermoplastics , 1984 .

[5]  J. K. Park,et al.  A study on fiber orientation during the injection molding of fiber-reinforced polymeric composites , 2001 .

[6]  J. d’Almeida,et al.  Influence of Fiber Orientation on the Mechanical Properties of Polyester/Jute Composites , 2006 .

[7]  G. B. Jeffery.  The motion of ellipsoidal particles immersed in a viscous fluid , 1922 .

[8]  E. Weis,et al.  Structure and mechanical behaviour of short glass fibre-reinforced ethylene-tetrafluoroethylene copolymers , 1992 .

[9]  J. Karger‐Kocsis,et al.  Polypropylene : structure, blends and composites , 1995 .

[10]  I. Verpoest,et al.  EFFECT OF FIBRES LENGTH AND FIBRES ORIENTATION ON THE PREDICTED ELASTIC PROPERTIES OF LONG FIBRE COMPOSITES , 2004 .

[11]  Yong-Taek Im,et al.  Numerical simulation of three-dimensional fiber orientation in short-fiber-reinforced injection-molded parts , 2002 .

[12]  J. Varna,et al.  Global Stiffness of a SMC Panel Considering Process Induced Fiber Orientation , 2004 .

[13]  M. Vincent,et al.  Description and modeling of fiber orientation in injection molding of fiber reinforced thermoplastics , 2005 .

[14]  J. Sarasua,et al.  The mechanical behaviour of PEEK short fibre composites , 1995, Journal of Materials Science.

[15]  Suresh G. Advani,et al.  Flow and rheology in polymer composites manufacturing , 1994 .

[16]  Suresh G. Advani,et al.  Process Modeling in Composites Manufacturing , 2004 .

[17]  T. Vu-khanh,et al.  Tensile properties of injection molded long fiber thermoplastic composites , 1989 .

[18]  C. L. Tucker,et al.  Orientation Behavior of Fibers in Concentrated Suspensions , 1984 .

[19]  J. Youn,et al.  Characterization of short glass fiber filled polystyrene by fiber orientation and mechanical properties , 1999 .

[20]  R. J. Gaymans,et al.  Polyamide 6—long glass fiber injection moldings , 1995 .

[21]  Xiao Hu,et al.  EFFECTS OF FIBER LENGTH AND ORIENTATION DISTRIBUTIONS ON THE MECHANICAL PROPERTIES OF SHORT-FIBER-REINFORCED POLYMERS , 1999 .