Numerical and experimental investigation of matrix-stabilized methane/air combustion in porous inert media

Abstract Porous media combustion offers exceptional advantages compared with techniques involving free flame burners. Porous medium burners are characterized by higher burning rates, increased flame stability, and lower combustion zone temperatures, which lead to a reduction in NO x formation. In addition, they show a very high turndown ratio, low emissions of CO, and are of very small size. In order to optimize the combustion process further and to adapt the burner design, as well as to obtain a tool that allows fast adaptation to new industrial applications, a numerical code utilizing a pseudohomogeneous heat transfer and flow model for the porous material was applied. It considers conservation equations for 20 species, two momentum equations, and one energy equation. This model enabled a numerical parametric study to be made for a porous medium burner with a rectangular cross-section geometry. The calculated 2D temperature fields and species concentrations, with premixed methane/air combustion, are compared with data obtained from experiments with the same burner geometry. It is shown that there is good agreement between the numerical solutions and the experimental data and it is concluded that the developed numerical program is an excellent tool to investigate combustion in porous media.

[1]  Yoshizawa Yoshio,et al.  Analytical study of the structure of radiation controlled flame , 1988 .

[2]  Massoud Kaviany,et al.  Direct simulation vs volume-averaged treatment of adiabatic, premixed flame in a porous medium , 1994 .

[3]  De Goey,et al.  A numerical and experimental study of the NO-emission of ceramic foam surface burners , 1995 .

[4]  Ronald D. Matthews,et al.  The necessity of using detailed kinetics in models for premixed combustion within porous media , 1993 .

[5]  James A. Miller,et al.  The Chemkin Thermodynamic Data Base , 1990 .

[6]  C. F. Curtiss,et al.  Molecular Theory Of Gases And Liquids , 1954 .

[7]  D. Spalding,et al.  A calculation procedure for heat, mass and momentum transfer in three-dimensional parabolic flows , 1972 .

[8]  K. Kuo.  Principles of combustion , 1986 .

[9]  S. Ramadhyani,et al.  Modelling of combustion and heat transfer in a packed bed with embedded coolant tubes , 1994 .

[10]  H. L. Stone.  ITERATIVE SOLUTION OF IMPLICIT APPROXIMATIONS OF MULTIDIMENSIONAL PARTIAL DIFFERENTIAL EQUATIONS , 1968 .

[11]  M. Perić,et al.  FINITE VOLUME METHOD FOR PREDICTION OF FLUID FLOW IN ARBITRARILY SHAPED DOMAINS WITH MOVING BOUNDARIES , 1990 .

[12]  S. G. Rubin,et al.  A diagonally dominant second-order accurate implicit scheme , 1974 .

[13]  S. Saxena,et al.  Thermal conductivity of binary, ternary and quaternary mixtures of rare gases , 1967 .

[14]  Ofodike A. Ezekoye,et al.  Combustion and heat transfer in model two-dimensional porous burners , 1999 .

[15]  Jürgen Warnatz,et al.  Influence of Transport Models and Boundary Conditions on Flame Structure , 1982 .

[16]  C. Wilke.  A Viscosity Equation for Gas Mixtures , 1950 .

[17]  J. Ellzey,et al.  Measurements of Emissions and Radiation for Methane Combustion within a Porous Medium Burner , 1994 .