The accuracy of a river bed moulding/casting system and the effectiveness of a low‐cost digital camera for recording river bed fabric

Digital photogrammetry has been used to develop and test an artificial river bed moulding and casting system, which allows the pebbles within a coarse-grain river bed to be recreated for hydraulic research in a laboratory flow channel or flume. Imagery of both the original streambed and the cast facsimile was acquired using a non-metric Kodak DCS460 digital camera and digital elevation models and orthophotographs were derived and compared to assess the accuracy of the moulding and casting system. These comparative tests proved to be critical in modifying and developing the system. Additional imagery was obtained in the field using a non-metric Olympus C3030 ‘‘compact’’ digital camera to assess whether far cheaper camera technology could deliver data appropriate for such comparative examinations. Internal calibration parameter sets and data that were generated were compared with data obtained by the non-metric Kodak DCS460. These tests demonstrate that digital sensors built around highquality 35 mm professional camera bodies and lenses are required for comparative examinations and for similar system development.

[1]  G. Hancock,et al.  The production of digital elevation models for experimental model landscapes , 2001 .

[2]  Clive S. Fraser,et al.  Digital camera self-calibration , 1997 .

[3]  Stuart N. Lane,et al.  Measuring Flume Surfaces for Hydraulics Research Using a Kodak DCS460 , 2001 .

[4]  Dimitrios Skarlatos.  Orthophotograph Production in Urban Areas , 1999 .

[5]  K. Richards,et al.  Discharge and sediment supply controls on erosion and deposition in a dynamic alluvial channel , 1996 .

[6]  A. Robert,et al.  Three‐dimensional flow structure around small‐scale bedforms in a simulated gravel‐bed environment , 2001 .

[7]  J. Peipe,et al.  High Resolution Still Video Camera for Industrial Photogrammetry , 1995 .

[8]  W. J. Young.  Clarification of the criteria used to identify near-bed flow regimes , 1992 .

[9]  S. N. Lane,et al.  Application of Digital Photogrammetry to Complex Topography for Geomorphological Research , 2000 .

[10]  K. Wolff,et al.  EXPLOITING THE MULTI VIEW GEOMETRY FOR AUTOMATIC SURFACES RECONSTRUCTION USING FEATURE BASED MATCHING IN MULTI MEDIA PHOTOGRAMMETRY , 2000 .

[11]  The CIPA "O. Wagner Pavillion" Test , 1996 .

[12]  Stuart N. Lane,et al.  Assessment of Dem Quality for Characterizing Surface Roughness Using Close Range Digital Photogrammetry , 1998 .

[13]  Jim H. Chandler,et al.  The assessment of sediment transport rates by automated digital photogrammetry: Photogram , 1998 .

[14]  Stuart N. Lane,et al.  The development of an automated correction ­procedure for digital photogrammetry for the study of wide, shallow, gravel‐bed rivers , 2000 .

[15]  Stuart N. Lane,et al.  Automated extraction of grain-size data from gravel surfaces using digital image processing , 2001 .

[16]  W. Faig.  CALIBRATION OF CLOSE-RANGE PHOTOGRAMMETRIC SYSTEMS: MATHEMATICAL FORMULATION , 1975 .

[17]  Stuart Robson,et al.  PRINCIPAL POINT BEHAVIOUR AND CALIBRATION PARAMETER MODELS FOR KODAK DCS CAMERAS , 1998 .

[18]  J. Chandler,et al.  Monitoring River-Channel Change Using Terrestrial Oblique Digital Imagery and Automated Digital Photogrammetry , 2002 .

[19]  S. Lane,et al.  Through‐Water Close Range Digital Photogrammetry in Flume and Field Environments , 2002 .

[20]  J. Chandler,et al.  A casting procedure for reproducing coarse‐grained sedimentary surfaces , 2003 .

[21]  K. Richards,et al.  Developments in monitoring and modelling small‐scale river bed topography , 1994 .

[22]  Clive S. Fraser,et al.  METRIC EXPLOITATION OF STILL VIDEO IMAGERY , 1995 .