Viscoplastic fluid mixing in a rotating tank

The laminar 2D mixing of viscoplastic fluids with an anchor impeller in a stirring tank is studied numerically. The flow structures, and particularly the static and moving rigid zones induced by the plasticity such as the presence of vortices, are examined in detail. Calculations are made for a wide range of yield and inertia values. It is shown that the application of a small yield stress can eliminate vortices. On the other hand, the increase in rotation velocity, i.e. the inertia, is not generally sufficient to reduce the size of the rigid zones. Power consumption is calculated and the mixing quality is determined by particle tracking. The calculations are made for different types of impeller configurations and an optimum configuration is proposed.

[1]  Andreas N. Alexandrou,et al.  Steady Herschel–Bulkley fluid flow in three-dimensional expansions , 2001 .

[2]  R. Byron Bird,et al.  The Rheology and Flow of Viscoplastic Materials , 1983 .

[3]  M. Kamiwano,et al.  Numerical analysis of flow of a Bingham fluid in an anchor impeller , 1994 .

[4]  R. Chhabra,et al.  An analytical model for the prediction of power consumption for shear-thinning fluids with helical ribbon and helical screw ribbon impellers , 2006 .

[5]  Wang Qiang,et al.  Viscous flow normal to a flat plate at moderate Reynolds numbers , 1993, Journal of Fluid Mechanics.

[6]  E. Mitsoulis On creeping drag flow of a viscoplastic fluid past a circular cylinder: wall effects , 2004 .

[7]  J. Tsamopoulos,et al.  Transient displacement of a viscoplastic material by air in straight and suddenly constricted tubes , 2003 .

[8]  Morton M. Denn,et al.  Interactions of two rigid spheres translating collinearly in creeping flow in a Bingham material , 2003 .

[9]  A. B. Metzner Agitation of non‐Newtonian fluids , 1957 .

[10]  Ian A. Frigaard,et al.  Numerical solution of duct flows of multiple visco-plastic fluids , 2004 .

[11]  Philippe A. Tanguy,et al.  A New Perspective for the Mixing of Yield Stress Fluids with Anchor Impellers , 1996 .

[12]  Pierre Saramito,et al.  An adaptive finite element method for Bingham fluid flows around a cylinder , 2003 .

[13]  John Tsamopoulos,et al.  Creeping motion of a sphere through a Bingham plastic , 1985, Journal of Fluid Mechanics.

[14]  S. Muller,et al.  Convergence of a Regularization Method for Creeping Flow of a Bingham Material About a Rigid Sphere , 2002 .

[15]  T. Papanastasiou Flows of Materials with Yield , 1987 .

[16]  Jean-Claude Latché,et al.  On a numerical strategy to compute gravity currents of non-Newtonian fluids , 2004 .

[17]  Anthony Wachs,et al.  Numerical simulation of non-isothermal viscoplastic waxy crude oil flows , 2005 .

[18]  Philippe A. Tanguy,et al.  A new investigation of the metzner‐otto concept for anchor mixing impellers , 1996 .

[19]  J. Ottino The Kinematics of Mixing: Stretching, Chaos, and Transport , 1989 .

[20]  Masabumi Nishikawa,et al.  POWER CONSUMPTION OF MIXING IMPELLERS IN BINGHAM PLASTIC LIQUIDS , 1970 .

[21]  A. W. Nienow,et al.  CAVERN SIZES IN AGITATED FLUIDS WITH A YIELD STRESS , 1981 .

[22]  H. Boisson,et al.  A Numerical Model of Yield Stress Fluid Dynamics in a Mixing Vessel , 2002 .

[23]  Albert Magnin,et al.  Viscoplastic flow around a cylinder in an infinite medium , 2003 .

[24]  R. Tanner,et al.  Numerical Simulation of Non-Newtonian Flow , 1984 .

[25]  I. Frigaard,et al.  On the usage of viscosity regularisation methods for visco-plastic fluid flow computation , 2005 .

[26]  Evan Mitsoulis,et al.  Viscoplastic flow around a cylinder kept between parallel plates , 2002 .

[27]  Michel Bercovier,et al.  A finite-element method for incompressible non-Newtonian flows , 1980 .

[28]  Gilmer R. Burgos,et al.  On the determination of yield surfaces in Herschel-Bulkley fluids , 1999 .

[29]  P. Jay,et al.  Flow normal to a flat plate of a viscoplastic fluid with inertia effects , 2005 .

[30]  G. Vinay,et al.  Numerical simulation of weakly compressible Bingham flows: The restart of pipeline flows of waxy crude oils , 2006 .

[31]  N. Phan-Thien,et al.  Tangential flow and advective mixing of viscoplastic fluids between eccentric cylinders , 2001, Journal of Fluid Mechanics.

[32]  John Tsamopoulos,et al.  Squeeze flow of Bingham plastics , 2001 .