Fracture study of concrete composites with synthetic fibers additive under modes I and III using ENDB specimen

[1]  M. Aliha,et al.  Evaluation of pure and mixed modes (I/III) fracture toughness of Portland cement concrete mixtures containing reclaimed asphalt pavement , 2018, Construction and Building Materials.

[2]  M. Aliha,et al.  Experimental and theoretical fracture toughness investigation of PUR foams under mixed mode I+III loading , 2018 .

[3]  Junfeng Guan,et al.  Wedge-splitting tests for tensile strength and fracture toughness of concrete , 2018 .

[4]  M. Aliha,et al.  Evaluating the effect of macro-synthetic fibre on the mechanical properties of roller-compacted concrete pavement using response surface methodology , 2018 .

[5]  F. Berto,et al.  Application of an average strain energy density criterion to obtain the mixed mode fracture load of granite rock tested with the cracked asymmetric four-point bend specimens , 2017, Theoretical and Applied Fracture Mechanics.

[6]  F. Berto,et al.  Tangential strain‐based criteria for mixed‐mode I/II fracture toughness of cement concrete , 2018 .

[7]  F. Berto,et al.  EMTSN criterion for evaluating mixed mode I/II crack propagation in rock materials , 2017 .

[8]  F. Berto,et al.  On the applicability of ASED criterion for predicting mixed mode I+II fracture toughness results of a rock material , 2017 .

[9]  M.R.M. Aliha,et al.  Fracture toughness determination of modified HMA mixtures with two novel disc shape configurations , 2017 .

[10]  A. Carpinteri,et al.  Mode I fracture toughness of fibre reinforced concrete , 2017 .

[11]  M.R.M. Aliha,et al.  The influence of natural and synthetic fibers on low temperature mixed mode I + II fracture behavior of warm mix asphalt (WMA) materials , 2017 .

[12]  M. Mirsayar,et al.  On the mixed mode I/II fracture properties of jute fiber-reinforced concrete , 2017 .

[13]  F. Berto,et al.  Investigation of fracture toughness for a polycrystalline graphite under combined tensile-tear deformation , 2017 .

[14]  T. Sadowski,et al.  The fracture toughness the KIIIc of concretes with F fly ash (FA) additive , 2017 .

[15]  M. Aliha,et al.  Crack behavior analysis of roller compacted concrete mixtures containing reclaimed asphalt pavement and crumb rubber , 2017 .

[16]  G. Golewski.  Effect of fly ash addition on the fracture toughness of plain concrete at third model of fracture , 2017 .

[17]  G. Golewski.  Determination of fracture toughness in concretes containing siliceous fly ash during mode III loading , 2017 .

[18]  M. Aliha,et al.  Rock Fracture Toughness Study Under Mixed Mode I/III Loading , 2017, Rock Mechanics and Rock Engineering.

[19]  M. Aliha,et al.  Fracture toughness prediction using Weibull statistical method for asphalt mixtures containing different air void contents , 2017 .

[20]  F. Berto,et al.  Fracture assessment of polymethyl methacrylate using sharp notched disc bend specimens under mixed mode I + III loading , 2016 .

[21]  T. Sadowski,et al.  Macroscopic Evaluation of Fracture Processes in Fly Ash Concrete , 2016 .

[22]  M. Mirsayar,et al.  New Approach to Determining Concrete Slab Lift-Off by Use of Interfacial Fracture Mechanics Concepts , 2016 .

[23]  Shaowei Hu,et al.  Experimental validation and fracture properties analysis on wedge splitting concrete specimens with different initial seam-height ratios , 2016 .

[24]  M. Aliha,et al.  Determination of mode III fracture toughness for different materials using a new designed test configuration , 2015 .

[25]  M. Ayatollahi,et al.  A new fixture for fracture tests under mixed mode I/III loading , 2015 .

[26]  M. Aliha,et al.  Numerical analysis of a new mixed mode I/III fracture test specimen , 2015 .

[27]  M. Shokrieh,et al.  Mechanical durability of an optimized polymer concrete under various thermal cyclic loadings - An experimental study , 2014 .

[28]  F. Taheri,et al.  An effective means for evaluating mixed-mode I/III stress intensity factors using single-edge notch beam specimen , 2013 .

[29]  M. Alqedra,et al.  Effect of forta-ferro fibers on fresh and mechanical properties of ultra high performance self compacting concrete , 2013 .

[30]  M. Ameri,et al.  Mixed mode fracture resistance of asphalt concrete mixtures , 2012 .

[31]  M. Shokrieh,et al.  Experimental determination of tensile strength and K Ic of polymer concretes using semi-circular bend (SCB) specimens , 2012 .

[32]  D. Svecova,et al.  Evaluation of Elastic Modulus for High-Strength Concrete , 2012 .

[33]  Andrea Carpinteri,et al.  Fracture behaviour of plain and fiber-reinforced concrete with different water content under mixed mode loading , 2010 .

[34]  Surendra P. Shah,et al.  Processing of high-performance fiber-reinforced cement-based composites , 2010 .

[35]  M. Ayatollahi,et al.  Brittle fracture evaluation of a fine grain cement mortar in combined tensile-shear deformation , 2009 .

[36]  A. M. Brandt,et al.  Fibre reinforced cement-based (FRC) composites after over 40 years of development in building and civil engineering , 2008 .

[37]  David Taylor,et al.  The theory of critical distances to predict static strength of notched brittle components subjected to mixed-mode loading , 2008 .

[38]  M. Elices,et al.  Local strain energy to assess the static failure of U-notches in plates under mixed mode loading , 2007 .

[39]  S. Ahmed,et al.  Fracture Toughness of Cement Mortar Containing High Volume Fly Ash , 2007, SP-242: 9th Canmet/ACI Fly Ash Conference.

[40]  Obada Kayali,et al.  Some characteristics of high strength fiber reinforced lightweight aggregate concrete , 2003 .

[41]  T. H. Wee,et al.  Mixed Mode I-III Fracture Testing of Cement Mortar , 2002 .

[42]  Wang.  TOUGHNESS CHARACTERISTICS OF SYNTHETIC FIBRE-REINFORCED CEMENTITIOUS COMPOSITES , 2002 .

[43]  J. M. Reynouard,et al.  Mixed mode fracture in plain and reinforced concrete: some results on benchmark tests , 2000 .

[44]  Surendra P. Shah,et al.  Fiber-Reinforced Cement Composites , 1992 .

[45]  A. Carpinteri.  Interaction between tensile strength failure and mixed mode crack propagation in concrete , 1988 .