Alloy design of welding filler metal for 9Cr/2.25Cr dissimilar welded joint and mechanical properties investigation

[1]  Li Runqi,et al.  Study on the microstructure and toughness of dissimilarly welded joints of advanced 9Cr/CrMoV , 2016 .

[2]  P. S. Robi,et al.  Modification of Larson–Miller Parameter Technique for Predicting Creep Life of Materials , 2016, Transactions of the Indian Institute of Metals.

[3]  S. David,et al.  Welding and weldability of candidate ferritic alloys for future advanced ultrasupercritical fossil power plants , 2013 .

[4]  D J Abson,et al.  Review of type IV cracking of weldments in 9–12%Cr creep strength enhanced ferritic steels , 2013 .

[5]  D. Rojas,et al.  9%Cr heat resistant steels: Alloy design, microstructure evolution and creep response at 650 °C , 2011 .

[6]  D. Abson,et al.  Performance of weldments in advanced 9%Cr steel–‘FB2’ , 2010 .

[7]  Wojciech Kosman,et al.  Thermal analysis of cooled supercritical steam turbine components , 2010 .

[8]  M. Kamaraj,et al.  Microstructure and Mechanical Properties of 9Cr-1Mo Steel Weld Fusion Zones as a Function of Weld Metal Composition , 2009, Journal of Materials Engineering and Performance.

[9]  C. Chovet,et al.  Effect of Various Factors on Toughness in P92 Saw Weld Metal , 2008 .

[10]  Fujio Abe,et al.  Precipitate design for creep strengthening of 9% Cr tempered martensitic steel for ultra-supercritical power plants , 2008, Science and technology of advanced materials.

[11]  K. B. S. Rao,et al.  Characterization of Microstructures across the Heat-Affected Zone of the Modified 9Cr-1Mo Weld Joint to Understand Its Role in Promoting Type IV Cracking , 2007 .

[12]  John Francis,et al.  Review Type IV cracking in ferritic power plant steels , 2006 .

[13]  John Hald,et al.  Behaviour of Z phase in 9–12%Cr steels , 2006 .

[14]  A. Schneider,et al.  Simulation of the kinetics of precipitation reactions in ferritic steels , 2005 .

[15]  F. Abe.  Bainitic and martensitic creep-resistant steels , 2004 .

[16]  Milan Svoboda,et al.  Long-term creep behavior of 9–12%Cr power plant steels ☆ , 2003 .

[17]  Fujio Abe,et al.  Creep-strengthening of steel at high temperatures using nano-sized carbonitride dispersions , 2003, Nature.

[18]  Torsten-Ulf Kern,et al.  The European efforts in material development for 650°C USC Power plants: COST522 , 2002 .

[19]  K. Laha,et al.  Comparison of creep behaviour of 2.25Cr–1Mo/9Cr–1Mo dissimilar weld joint with its base and weld metals , 2001 .

[20]  Kouichi Maruyama,et al.  Strengthening Mechanisms of Creep Resistant Tempered Martensitic Steel , 2001 .

[21]  K. Miyata,et al.  Effect of Mo and W on the Phase Stability of Precipitates in Low Cr Heat Resistant Steels , 2001 .

[22]  David R Hayhurst,et al.  Continuum damage mechanics analyses of type IV creep failure in ferritic steel crossweld specimens , 1999 .

[23]  H. Andren,et al.  Microstructural change of a 5% Cr steel weld metal during tempering , 1998 .

[24]  V. Vodárek,et al.  Effect of nickel on the precipitation processes in 12CrMoV steels during creep at 550°C , 1997 .

[25]  C. Middleton,et al.  Intergranular creep-cavity formation in low-alloy bainitic steels , 1981 .

[26]  Augusto Di Gianfrancesco,et al.  Materials for Ultra-Supercritical and Advanced Ultra-Supercritical Power Plants , 2016 .

[27]  S. Saroja,et al.  Effectiveness of Ni-based diffusion barriers in preventing hard zone formation in ferritic steel joints , 2009 .

[28]  John Hald,et al.  Microstructure and long-term creep properties of 9–12% Cr steels , 2008 .

[29]  V. Vodárek,et al.  Microstructural Evolution in P23/P91 Heterogeneous Welds during Creep at 500-600° C , 2008 .

[30]  Fujio Abe,et al.  Creep-resistant Steels , 2008 .

[31]  Fujio Abe,et al.  Alloy design of creep resistant 9Cr steel using a dispersion of nano-sized carbonitrides , 2007 .

[32]  J. Sopoušek,et al.  Structural stability of dissimilar weld between two Cr-Mo-V steels , 2006 .

[33]  S. Saroja,et al.  Microstructure and microchemistry of hard zone in dissimilar weldments of Cr-Mo steels , 2006 .

[34]  Y. Kondou,et al.  Development of Large-Capacity , Highly Efficient Welded Rotor for Steam Turbines , 2001 .

[35]  K. Laha,et al.  An assessment of creep deformation and fracture behavior of 2.25Cr-1Mo similar and dissimilar weld joints , 2001 .