Synergistic effects of copolymerization and fluorination on acceptor polymers for efficient and stable all-polymer solar cells

High-performance, stable and flexible all-PSCs were realized by developing new fluorinated and random acceptor polymers.

[1]  C. Brabec,et al.  Surpassing the 10% efficiency milestone for 1-cm2 all-polymer solar cells , 2019, Nature Communications.

[2]  Bumjoon J. Kim,et al.  Recent Advances, Design Guidelines, and Prospects of All-Polymer Solar Cells. , 2019, Chemical reviews.

[3]  Thuc‐Quyen Nguyen,et al.  Charge Recombination Dynamics in Organic Photovoltaic Systems with Enhanced Dielectric Constant , 2019, Advanced Functional Materials.

[4]  Yongfang Li,et al.  11.2% Efficiency all-polymer solar cells with high open-circuit voltage , 2019, Science China Chemistry.

[5]  Y. Zou,et al.  Realizing 8.6% Efficiency from Non‐Halogenated Solvent Processed Additive Free All Polymer Solar Cells with a Quinoxaline Based Polymer , 2019, Solar RRL.

[6]  G. Wang,et al.  All-Polymer Solar Cells: Recent Progress, Challenges, and Prospects. , 2019, Angewandte Chemie.

[7]  Wei Zhang,et al.  Effect of Post-Thermal Annealing on the Performance and Charge Photogeneration Dynamics of PffBT4T-2OD/PC71BM Solar Cells , 2019, Polymers.

[8]  Ergang Wang,et al.  Recent Advances in n‐Type Polymers for All‐Polymer Solar Cells , 2019, Advanced materials.

[9]  Yongqian Shi,et al.  High‐Performance All‐Polymer Solar Cells Enabled by an n‐Type Polymer Based on a Fluorinated Imide‐Functionalized Arene , 2019, Advanced materials.

[10]  R. Coehoorn,et al.  Relating Frontier Orbital Energies from Voltammetry and Photoelectron Spectroscopy to the Open‐Circuit Voltage of Organic Solar Cells , 2019, Advanced Energy Materials.

[11]  F. Liu,et al.  A generic green solvent concept boosting the power conversion efficiency of all-polymer solar cells to 11% , 2019, Energy & Environmental Science.

[12]  W. Ma,et al.  Hierarchical Morphology Stability under Multiple Stresses in Organic Solar Cells , 2019, ACS Energy Letters.

[13]  H. Ade,et al.  Efficient All-Polymer Solar Cells based on a New Polymer Acceptor Achieving 10.3% Power Conversion Efficiency , 2019, ACS Energy Letters.

[14]  Lei Wang,et al.  Imide-Functionalized Polymer Semiconductors. , 2018, Chemistry.

[15]  H. Woo,et al.  Fluorine Substituted Bithiophene Imide-Based n-Type Polymer Semiconductor for High-Performance Organic Thin-Film Transistors and All-Polymer Solar Cells , 2018, Solar RRL.

[16]  Xiaochen Wang,et al.  Aromatic‐Diimide‐Based n‐Type Conjugated Polymers for All‐Polymer Solar Cell Applications , 2018, Advanced materials.

[17]  Yongfang Li,et al.  Highly Flexible and Efficient All-Polymer Solar Cells with High-Viscosity Processing Polymer Additive toward Potential of Stretchable Devices. , 2018, Angewandte Chemie.

[18]  Yang Yang,et al.  Next-generation organic photovoltaics based on non-fullerene acceptors , 2018 .

[19]  Yongfang Li,et al.  Efficient and thermally stable all-polymer solar cells based on a fluorinated wide-bandgap polymer donor with high crystallinity , 2018 .

[20]  S. Jenekhe,et al.  All-Polymer Solar Cells with 9.4% Efficiency from Naphthalene Diimide-Biselenophene Copolymer Acceptor , 2018, Chemistry of Materials.

[21]  Yang Yang,et al.  Unique Energy Alignments of a Ternary Material System toward High‐Performance Organic Photovoltaics , 2018, Advanced materials.

[22]  C. Brabec,et al.  Morphology Optimization via Side Chain Engineering Enables All-Polymer Solar Cells with Excellent Fill Factor and Stability. , 2018, Journal of the American Chemical Society.

[23]  M. Ford,et al.  Thermally Stable All‐Polymer Solar Cells with High Tolerance on Blend Ratios , 2018 .

[24]  A. Facchetti,et al.  Naphthalenediimide (NDI) polymers for all-polymer photovoltaics , 2018 .

[25]  Yongfang Li,et al.  Dye-Incorporated Polynaphthalenediimide Acceptor for Additive-Free High-Performance All-Polymer Solar Cells. , 2018, Angewandte Chemie.

[26]  Zhaojun Li,et al.  Energy-effectively printed all-polymer solar cells exceeding 8.61% efficiency , 2018 .

[27]  Bumjoon J. Kim,et al.  Mechanically robust and high-performance ternary solar cells combining the merits of all-polymer and fullerene blends , 2018 .

[28]  Kaiwen Lin,et al.  8.0% Efficient all-polymer solar cells based on novel starburst polymer acceptors , 2018, Science China Chemistry.

[29]  Zhaojun Li,et al.  High-performance all-polymer solar cells based on fluorinated naphthalene diimide acceptor polymers with fine-tuned crystallinity and enhanced dielectric constants , 2018 .

[30]  Seth R. Marder,et al.  Non-fullerene acceptors for organic solar cells , 2018 .

[31]  Yang Yang,et al.  Ternary System with Controlled Structure: A New Strategy toward Efficient Organic Photovoltaics , 2018, Advanced materials.

[32]  F. Liu,et al.  Side-chain modification of polyethylene glycol on conjugated polymers for ternary blend all-polymer solar cells with efficiency up to 9.27% , 2018, Science China Chemistry.

[33]  F. Liu,et al.  All‐Polymer Solar Cells Based on a Conjugated Polymer Containing Siloxane‐Functionalized Side Chains with Efficiency over 10% , 2017, Advanced materials.

[34]  M. Kemerink,et al.  Design Rule for Improved Open-Circuit Voltage in Binary and Ternary Organic Solar Cells. , 2017, ACS applied materials & interfaces.

[35]  Wei Zhang,et al.  9.0% power conversion efficiency from ternary all-polymer solar cells , 2017 .

[36]  W. You,et al.  The Curious Case of Fluorination of Conjugated Polymers for Solar Cells. , 2017, Accounts of chemical research.

[37]  Zhaojun Li,et al.  High‐Performance and Stable All‐Polymer Solar Cells Using Donor and Acceptor Polymers with Complementary Absorption , 2017 .

[38]  Nathan T. Shewmon,et al.  Effect of Polymer–Fullerene Interaction on the Dielectric Properties of the Blend , 2017 .

[39]  Francisco Molina-Lopez,et al.  Roll‐to‐Roll Printed Large‐Area All‐Polymer Solar Cells with 5% Efficiency Based on a Low Crystallinity Conjugated Polymer Blend , 2017 .

[40]  Bumjoon J. Kim,et al.  From Fullerene-Polymer to All-Polymer Solar Cells: The Importance of Molecular Packing, Orientation, and Morphology Control. , 2016, Accounts of chemical research.

[41]  Bumjoon J. Kim,et al.  Controlling Energy Levels and Blend Morphology for All-Polymer Solar Cells via Fluorination of a Naphthalene Diimide-Based Copolymer Acceptor , 2016 .

[42]  O. Inganäs,et al.  High Performance All-Polymer Solar Cells by Synergistic Effects of Fine-Tuned Crystallinity and Solvent Annealing. , 2016, Journal of the American Chemical Society.

[43]  Feng Gao,et al.  Fullerene‐Free Polymer Solar Cells with over 11% Efficiency and Excellent Thermal Stability , 2016, Advanced materials.

[44]  Changduk Yang,et al.  Improved efficiency of DTGe(FBTTh2)2-based solar cells by using macromolecular additives: How macromolecular additives versus small additives influence nanoscale morphology and photovoltaic performance , 2016 .

[45]  Cheng Wang,et al.  Flexible, highly efficient all-polymer solar cells , 2015, Nature Communications.

[46]  John R. Tumbleston,et al.  Quantification of Nano‐ and Mesoscale Phase Separation and Relation to Donor and Acceptor Quantum Efficiency, Jsc, and FF in Polymer:Fullerene Solar Cells , 2014, Advanced materials.

[47]  C. Luscombe,et al.  Influence of fluorine substituents on the film dielectric constant and open-circuit voltage in organic photovoltaics , 2014 .

[48]  Jianhui Hou,et al.  Design, Application, and Morphology Study of a New Photovoltaic Polymer with Strong Aggregation in Solution State , 2012 .

[49]  Sean E. Shaheen,et al.  Pathways to a New Efficiency Regime for Organic Solar Cells , 2012 .

[50]  Bumjoon J. Kim,et al.  Effects of Solubilizing Group Modification in Fullerene Bis-Adducts on Normal and Inverted Type Polymer Solar Cells , 2012 .

[51]  A. Roy,et al.  Recombination in polymer-fullerene bulk heterojunction solar cells , 2010, 1010.5021.

[52]  Bernard Kippelen,et al.  Area-scaling of organic solar cells , 2009 .

[53]  V. Mihailetchi,et al.  Photocurrent generation in polymer-fullerene bulk heterojunctions. , 2004, Physical review letters.

[54]  Bumjoon J. Kim,et al.  Design of Cyanovinylene‐Containing Polymer Acceptors with Large Dipole Moment Change for Efficient Charge Generation in High‐Performance All‐Polymer Solar Cells , 2018 .

[55]  Wei Zhang,et al.  8.0% Efficient All‐Polymer Solar Cells with High Photovoltage of 1.1 V and Internal Quantum Efficiency near Unity , 2018 .

[56]  Jinsong Huang,et al.  Fluorine substituted thiophene-quinoxaline copolymer to reduce the HOMO level and increase the dielectric constant for high open-circuit voltage organic solar cells† , 2013 .