A buckling region in locust hindlegs contains resilin and absorbs energy when jumping or kicking goes wrong

SUMMARY If a hindleg of a locust slips during jumping, or misses its target during kicking, energy generated by the two extensor tibiae muscles is no longer expended in raising the body or striking a target. How, then, is the energy in a jump (4100–4800 μJ) or kick (1700 μJ) dissipated? A specialised buckling region found in the proximal hind-tibia where the bending moment is high, but not present in the other legs, buckled and allowed the distal part of the tibia to extend. In jumps when a hindleg slipped, it bent by a mean of 23±14 deg at a velocity of 13.4±9.5 deg ms–1; in kicks that failed to contact a target it bent by 32±16 deg at a velocity of 32.9±9.5 deg ms–1. It also buckled 8.5±4.0 deg at a rate of 0.063±0.005 deg ms–1 when the tibia was prevented from flexing fully about the femur in preparation for both these movements. By experimentally buckling this region through 40 deg at velocities of 0.001–0.65 deg ms–1, we showed that one hindleg could store about 870 μJ on bending, of which 210 μJ was dissipated back to the leg on release. A band of blue fluorescence was revealed at the buckling region under UV illumination that had the two key signatures of the elastic protein resilin. A group of campaniform sensilla 300 μm proximal to the buckling region responded to imposed buckling movements. The features of the buckling region show that it can act as a shock absorber as proposed previously when jumping and kicking movements go wrong.