A New Distributed Parameter Broadband Matching Method for Power Amplifier via Real Frequency Technique

A general matching method is presented in this paper for broadband power amplifier (PA) design. A novel cost function is proposed for the real frequency technique (RFT), which could straightforwardly describe PA optimal impedance along with frequency change. The new function is also developed to design a broadband transformer for the PA output matching network (MN). Based on Richard transformation, a commensurate transmission line is deployed so that the PA matching could be convenient expressed by a real positive function. More important is that the function could be directly implemented with a distributed MN through synthesis theory. Therefore, this method is practical for computer-aided design and has less calculation amount with new function for the RFT. To verify the method, a step-by-step design of a broadband PA is given. For large signals, power gain is 14.2-16.8 dB across 0.9-2.8 GHz, while output power is around 39.5 dBm. The maximum power-added efficiency is from 52.2% to 85.1%.

[1]  P. I. Richards A special class of functions with positive real part in a half-plane , 1947 .

[2]  P.I. Richards,et al.  Resistor-Transmission-Line Circuits , 1948, Proceedings of the IRE.

[3]  H. Ozaki,et al.  Synthesis of Transmission-Line Networks and the Design of UHF Filters , 1955 .

[4]  T. Fujisawa Realizability Theorem for Mid-series of Mid-shunt Low-pass Ladders Without Mutual Induction , 1955 .

[5]  V. Belevitch,et al.  Topics in the Design of Insertion Loss Filters , 1955 .

[6]  A. Grayzel A Synthesis Procedure for Transmission Line Networks , 1958 .

[7]  A. Fettweis On the factorization of transfer matrices of lossless two-ports , 1970 .

[8]  H. Carlin A new approach to gain-bandwidth problems , 1977 .

[9]  E. Hammerstad,et al.  Accurate Models for Microstrip Computer-Aided Design , 1980, 1980 IEEE MTT-S International Microwave symposium Digest.

[10]  J.W. Gewartowski,et al.  Solid-state microwave amplifier design , 1982, Proceedings of the IEEE.

[11]  Xiaohong Tang,et al.  Performance Study of a Class-E Power Amplifier With Tuned Series-Parallel Resonance Network , 2008, IEEE Transactions on Microwave Theory and Techniques.

[12]  M. Sengul Synthesis of Cascaded Lossless Commensurate Lines , 2008, IEEE Transactions on Circuits and Systems II: Express Briefs.

[13]  Fei You,et al.  The Effects of Limited Drain Current and On Resistance on the Performance of an LDMOS Inverse Class-E Power Amplifier , 2009, IEEE Transactions on Microwave Theory and Techniques.

[14]  Metin Sengül Construction of Lossless Ladder Networks With Simple Lumped Elements Connected Via Commensurate Transmission Lines , 2009, IEEE Trans. Circuits Syst. II Express Briefs.

[15]  Songbai He,et al.  Efficiency Enhancement of Class-E Power Amplifiers at Low Drain Voltage , 2010, IEEE Transactions on Microwave Theory and Techniques.

[16]  Slim Boumaiza,et al.  Design of a broadband and highly efficient 45W GaN power amplifier via simplified real frequency technique , 2010, MTT 2010.

[17]  Christian Fager,et al.  Design of a Highly Efficient 2–4-GHz Octave Bandwidth GaN-HEMT Power Amplifier , 2010, IEEE Transactions on Microwave Theory and Techniques.

[18]  B. S. Yarman Real frequency techniques to design ultra wideband circuits , 2010, 2010 10th Mediterranean Microwave Symposium.

[19]  D. Y. Wu,et al.  Design of a broadband and highly efficient 45W GaN power amplifier via simplified real frequency technique , 2010, 2010 IEEE MTT-S International Microwave Symposium.

[20]  Binboga Siddik Yarman,et al.  Design of Ultra Wideband Power Transfer Networks , 2010 .

[21]  David D. Wentzloff,et al.  IEEE Transactions on Microwave Theory and Techniques and Antennas and Propagation Announce a Joint Special Issue on Ultra-Wideband (UWB) Technology , 2010 .

[22]  D. Peroulis,et al.  Design of Highly Efficient Broadband Class-E Power Amplifier Using Synthesized Low-Pass Matching Networks , 2011, IEEE Transactions on Microwave Theory and Techniques.

[23]  Lei Dong,et al.  High-efficiency Class-F−1 power amplifier design with input harmonic manipulation , 2012, 2012 IEEE Topical Conference on Power Amplifiers for Wireless and Radio Applications.

[24]  D. Peroulis,et al.  Design of Broadband Highly Efficient Harmonic-Tuned Power Amplifier Using In-Band Continuous Class- ${\hbox{F}}^{-1}/{\hbox{F}}$ Mode Transferring , 2012, IEEE Transactions on Microwave Theory and Techniques.

[25]  Christer M. Andersson,et al.  Decade bandwidth high efficiency GaN HEMT power amplifier designed with resistive harmonic loading , 2012, 2012 IEEE/MTT-S International Microwave Symposium Digest.

[26]  Songbai He,et al.  Efficiency-enhanced Doherty amplifier with extended bandwidth based on asymmetrical drain voltage , 2012, 2012 IEEE/MTT-S International Microwave Symposium Digest.

[27]  Lei Guan,et al.  A Simplified Broadband Design Methodology for Linearized High-Efficiency Continuous Class-F Power Amplifiers , 2012, IEEE Transactions on Microwave Theory and Techniques.

[28]  Rolf H. Jansen,et al.  Broadband Doherty Power Amplifier via Real Frequency Technique , 2012, IEEE Transactions on Microwave Theory and Techniques.

[29]  F. Giannini,et al.  A Doherty Architecture With High Feasibility and Defined Bandwidth Behavior , 2013, IEEE Transactions on Microwave Theory and Techniques.

[30]  Songbai He,et al.  A novel topology of matching network for realizing broadband high efficiency continuous Class-F power amplifiers , 2013, 2013 European Microwave Integrated Circuit Conference.

[31]  Songbai He,et al.  Analysis of a Broadband High-Efficiency Switch-Mode $\Delta \Sigma $ Supply Modulator Based on a Class-E Amplifier and a Class-E Rectifier , 2013, IEEE Transactions on Microwave Theory and Techniques.

[32]  C. Fager,et al.  A Modified Doherty Power Amplifier With Extended Bandwidth and Reconfigurable Efficiency , 2013, IEEE Transactions on Microwave Theory and Techniques.

[33]  Songbai He,et al.  2-4 GHz wideband power amplifier with ultra-flat gain and high PAE , 2013 .

[34]  Kenle Chen Design of Broadband Highly Efficient Harmonic-Tuned Power Amplifier Using In-Band Continuous Class (-1 ) / F Mode Transferring , 2016 .