Computational time and domain size analysis of porous media flows using the lattice Boltzmann method

The purpose of this study is to investigate the computational time required to describe the fluid flow behavior through a porous medium and its relation to the corresponding domain size. The fluid flow behavior is recovered using the lattice Boltzmann method (LBM). The selected methodology has been applied because of its feasibility for mimicking the fluid flow behavior in complex geometries and moving boundaries. In this study, three different porosities are selected to calculate, for several sizes domain, the required computational time to reach the steady state. Two different cases are implemented: (1)increasing the transversal area, but keeping the layer thickness as a constant, and (2)increasing the total volume of the pore domain by increasing all the dimensions of the volume equally. The porous media are digitally generated by placing the solid obstacles randomly, but uniformly distributed in the whole domain. Several relationships relating the computational time, domain size and porosity are proposed. Additionally, an expression that relates the hydraulic tortuosity to the porosity is proposed.

[1]  Sauro Succi,et al.  The lattice Boltzmann equation: a new tool for computational fluid-dynamics , 1991 .

[2]  Bengt Sundén,et al.  Highlights of Fuel Cell Modeling From a Lattice Boltzmann Method Point of View , 2014 .

[3]  A. Sousa,et al.  Fluid Flow Simulation in Random Porous Media at Pore Level Using Lattice Boltzmann Method , 2007 .

[4]  R. Bouchet,et al.  Tortuosity of porous particles. , 2007, Analytical chemistry.

[5]  Kenneth Stuart Sorbie,et al.  3D Stochastic Modelling of Heterogeneous Porous Media – Applications to Reservoir Rocks , 2006 .

[6]  M. Andersson,et al.  A review of cell-scale multiphase flow modeling, including water management, in polymer electrolyte fuel cells , 2016 .

[7]  R. J. Millington,et al.  Gas Diffusion in Porous Media , 1959, Science.

[8]  M. Ben Clennell,et al.  Tortuosity: a guide through the maze , 1997, Geological Society, London, Special Publications.

[9]  Cyrus K. Aidun,et al.  Lattice-Boltzmann Method for Complex Flows , 2010 .

[10]  A. Mohamad.  Lattice Boltzmann Method: Fundamentals and Engineering Applications with Computer Codes , 2011 .

[11]  A. P. Malinauskas,et al.  Flow and Diffusion of Gases in Porous Media , 1967 .

[12]  Mayken Espinoza Andaluz,et al.  Analysis of Porosity and Tortuosity in a 2D Selected Region of Solid Oxide Fuel Cell Cathode Using the Lattice Boltzmann Method , 2015 .

[13]  Shiyi Chen,et al.  LATTICE BOLTZMANN METHOD FOR FLUID FLOWS , 2001 .

[14]  W. Guan,et al.  Effect of Contact between Electrode and Interconnect on Performance of SOFC Stacks , 2011 .

[15]  B. Sundén,et al.  Compress effects on porosity, gas‐phase tortuosity, and gas permeability in a simulated PEM gas diffusion layer , 2015 .

[16]  Charlotte Hamngren Blomqvist,et al.  Pore size effects on convective flow and diffusion through nanoporous silica gels , 2015 .

[17]  Sauro Succi,et al.  Lattice Boltzmann 2038 , 2015 .

[18]  P. M. Heertjes,et al.  Analysis of diffusion in macroporous media in terms of a porosity, a tortuosity and a constrictivity factor , 1974 .

[19]  P. Bhatnagar,et al.  A Model for Collision Processes in Gases. I. Small Amplitude Processes in Charged and Neutral One-Component Systems , 1954 .

[20]  A. Mohamad.  Lattice Boltzmann Method , 2011 .

[21]  R. W. Skaggs,et al.  Energy and water balance of two contrasting loblolly pine plantations on the lower coastal plain of North Carolina, USA , 2010 .

[22]  F. Gökbulak,et al.  EXCLOSURE EFFECTS ON RECOVERY OF SELECTED SOIL PROPERTIES IN A MIXED BROADLEAF FOREST RECREATION SITE , 2013 .