A review on mechanical behavior of natural fiber based hybrid composites

Hybrid composites are manufactured by combining two or more fibers in a single matrix. Hybrid composites can be made from artificial fibers, natural fibers and with a combination of both artificial and natural fibers. Hybrid composites can help us to achieve a better combination of properties than fiber reinforced composites. The constituent fibers in a hybrid composite can be altered in a number of ways leading to variation in its properties. The importance of this review can be attributed to the significant aspects of natural fiber based hybrid composites which are found to be predominantly affected by factors which include variation in fiber volume/weight fraction, variation in stacking sequence of fiber layers, fiber treatment and environmental conditions.

[1]  J. Lim,et al.  MECHANICAL PROPERTIES OF HEMP FIBERS AND HEMP / PP COMPOSITES : EFFECTS OF CHEMICAL SURFACE TREATMENT , 2011 .

[2]  G. Jeronimidis,et al.  Partial replacement of E-glass fibers with flax fibers in composites and effect on falling weight impact performance , 2005 .

[3]  M. Kumar,et al.  Frictional Coefficient, Hardness, Impact Strength, and Chemical Resistance of Reinforced Sisal-Glass Fiber Epoxy Hybrid Composites , 2010 .

[4]  H. Khalil,et al.  Agro-hybrid Composite: The Effects on Mechanical and Physical Properties of Oil Palm Fiber (EFB)/Glass Hybrid Reinforced Polyester Composites , 2007 .

[5]  Y. S. Negi,et al.  Recent Development in Natural Fiber Reinforced Polypropylene Composites , 2009 .

[6]  Mubarak A. Khan,et al.  Role of potassium permanganate and urea on the improvement of the mechanical properties of jute polypropylene composites , 2010 .

[7]  A. Athijayamani,et al.  Mechanical properties of natural fibers reinforced polyester hybrid composite , 2010 .

[8]  K. Ahmed,et al.  Tensile, flexural and interlaminar shear properties of woven jute and jute-glass fabric reinforced polyester composites , 2007 .

[9]  M. Skrifvars,et al.  Impact and flexural properties of flax fabrics and Lyocell fiber-reinforced bio-based thermoset , 2011 .

[10]  P. H. Parsania,et al.  Performance Evaluation of Treated—Untreated Jute—Carbon and Glass—Carbon Hybrid Composites of Bisphenol-C based Mixed Epoxy—Phenolic Resins , 2009 .

[11]  Kishore,et al.  Compressive strength of jute-glass hybrid fibre composites , 1983 .

[12]  William D. Callister,et al.  Materials Science and Engineering: An Introduction , 1985 .

[13]  Hazizan Md Akil,et al.  Effect of water absorption on pultruded jute/glass fiber-reinforced unsaturated polyester hybrid composites , 2012 .

[14]  Satoshi Kobayashi,et al.  Effect of alkali treatment on interfacial and mechanical properties of coir fiber reinforced poly(butylene succinate) biodegradable composites , 2011 .

[15]  S. Naidu,et al.  Kapok/Glass Polyester Hybrid Composites: Tensile and Hardness Properties , 2008 .

[16]  M. Kubouchi,et al.  Effect of Fiber Loading on the Mechanical Strength of NFR Hybrid Composites , 2010 .

[17]  A. Rajulu,et al.  Flexural and Compressive Properties of Bamboo and Glass Fiber Reinforced Epoxy Hybrid Composites , 2010 .

[18]  A. Rajulu,et al.  Chemical Resistance and Tensile Properties of Glass and Bamboo Fibers Reinforced Polyester Hybrid Composites , 2010 .

[19]  P. Noorunnisa Khanam,et al.  Chemical Resistance Studies of Silk/Sisal Fiber-Reinforced Unsaturated Polyester-Based Hybrid Composites , 2010 .

[20]  A. V. R. Prasad,et al.  A Study on flexural properties of wildcane grass fiber-reinforced polyester composites , 2011 .

[21]  P. Wambua,et al.  Natural fibres: can they replace glass in fibre reinforced plastics? , 2001 .

[22]  Ahmad Alawar,et al.  Characterization of treated date palm tree fiber as composite reinforcement , 2009 .

[23]  M. Rong,et al.  Fully biodegradable natural fiber composites from renewable resources: All-plant fiber composites , 2005 .

[24]  M. Beg,et al.  Study on the Mechanical Properties of Jute/Glass Fiber-reinforced Unsaturated Polyester Hybrid Composites: Effect of Surface Modification by Ultraviolet Radiation , 2006 .

[25]  M. Sain,et al.  Studies on the Water Absorption Properties of Short Hemp—Glass Fiber Hybrid Polypropylene Composites , 2007 .

[26]  Kin-tak Lau,et al.  Natural fibre-reinforced composites for bioengineering and environmental engineering , 2009 .

[27]  S. Priya,et al.  Mechanical Performance of Biofiber/Glass-reinforced Epoxy Hybrid Composites , 2006 .

[28]  Kin Liao,et al.  Environmental effects on bamboo-glass/polypropylene hybrid composites , 2003 .

[29]  Yuqiu Yang,et al.  Mechanical property and hydrothermal aging of injection molded jute/polypropylene composites , 2011 .

[30]  Sabu Thomas,et al.  Mechanical Performance of Short Banana/Sisal Hybrid Fiber Reinforced Polyester Composites , 2010 .

[31]  A. Khairul,et al.  The Effect of Different Laminations on Mechanical and Physical Properties of Hybrid Composites , 2009 .

[32]  I. Ghasemi,et al.  Tensile properties of wood flour/kenaf fiber polypropylene hybrid composites , 2007 .

[33]  A. Esfandiari.  Mechanical Properties of PP/Jute and Glass Fibers Composites: The Statistical Investigation , 2007 .

[34]  M. Beg,et al.  Mechanical and degradation characteristics of natural silk and synthetic phosphate glass fiber reinforced polypropylene composites , 2011 .

[35]  Sergio Neves Monteiro,et al.  Natural-fiber polymer-matrix composites: Cheaper, tougher, and environmentally friendly , 2009 .

[36]  K. John,et al.  Tensile, Flexural and Compressive Properties of Sisal/Silk Hybrid Composites , 2007 .

[37]  N. Suppakarn,et al.  Effect of glass fiber hybridization on properties of sisal fiber–polypropylene composites , 2009 .

[38]  S. Basavarajappa,et al.  Damage characterisation of glass/textile fabric polymer hybrid composites in sea water environment , 2010 .

[39]  Sabu Thomas,et al.  The mechanical performance of hybrid phenol-formaldehyde-based composites reinforced with glass and oil palm fibres , 2002 .

[40]  M. A. Quaiyyum,et al.  Characterization of plant and animal based natural fibers reinforced polypropylene composites and their comparative study , 2010 .

[41]  K. Ahmed,et al.  Elastic property evaluation of jute-glass fibre hybrid composite using experimental and CLT approach , 2006 .

[42]  M. Jawaid,et al.  Woven hybrid composites: Water absorption and thickness swelling behaviors , 2011, BioResources.

[43]  M. Jawaid,et al.  Woven hybrid composites: Tensile and flexural properties of oil palm-woven jute fibres based epoxy composites , 2011 .

[44]  T. Gowda,et al.  Some mechanical properties of untreated jute fabric-reinforced polyester composites , 1999 .

[45]  M. Misra,et al.  Biofibres, biodegradable polymers and biocomposites: An overview , 2000 .

[46]  S. Joshi,et al.  Are natural fiber composites environmentally superior to glass fiber reinforced composites , 2004 .

[47]  R.D.Pruthviraj.  A review on recent applications and future prospectus of hybrid composites in various engineering applications , 2014 .

[48]  Hao Wang,et al.  A review on the tensile properties of natural fiber reinforced polymer composites , 2011 .

[49]  Sabu Thomas,et al.  Tensile and Impact Properties of Banana Fibre / Glass Fibre Hybrid Polyester Composites , 2022 .

[50]  A. Shahzad.  Impact and fatigue properties of hemp–glass fiber hybrid biocomposites , 2011 .

[51]  C. Santulli.  Impact properties of glass/plant fibre hybrid laminates , 2007 .

[52]  R. Velmurugan,et al.  Mechanical properties of palmyra/glass fiber hybrid composites , 2007 .

[53]  M. L. Drummond,et al.  Influence of the Stacking Sequence on the Mechanical Properties of Glass/Sisal Hybrid Composites , 2010 .

[54]  Sabu Thomas,et al.  Studies on Tensile and Flexural Properties of Short Banana/Glass Hybrid Fiber Reinforced Polystyrene Composites , 2008 .

[55]  U. Natarajan,et al.  Effect of glass hybridization and staking sequence on mechanical behaviour of interply coir–glass hybrid laminate , 2011 .

[56]  S. Naidu,et al.  Flexural, Compressive, and Interlaminar Shear Strength Properties of Kapok/Glass Composites: , 2009 .

[57]  K. John,et al.  Chemical Resistance of Sisal/Glass Reinforced Unsaturated Polyester Hybrid Composites , 2007 .

[58]  M. Ashok Kumar,et al.  Frictional Coefficient, Hardness, Impact Strength, and Chemical Resistance of Reinforced Sisal-Glass Fiber Epoxy Hybrid Composites , 2010 .

[59]  A. Elayaperumal,et al.  Prediction of tensile properties of hybrid-natural fiber composites , 2012 .

[60]  P. Noorunnisa Khanam,et al.  Tensile, Flexural, and Compressive Properties of Coir/Silk Fiber-reinforced Hybrid Composites , 2010 .

[61]  A. Day,et al.  Jute-fibre glass-plywood/particle board composite , 2008 .

[62]  K. John,et al.  Tensile Properties of Unsaturated Polyester-Based Sisal Fiber–Glass Fiber Hybrid Composites , 2004 .

[63]  R.V. Silva,et al.  Curaua/Glass Hybrid Composite: The Effect of Water Aging on the Mechanical Properties , 2009 .

[64]  Jim Holbery,et al.  Natural-fiber-reinforced polymer composites in automotive applications , 2006 .

[65]  Manjusri Misra,et al.  Studies on mechanical performance of biofibre/glass reinforced polyester hybrid composites , 2003 .

[66]  K. Satyanarayana,et al.  Biodegradable composites based on lignocellulosic fibers—An overview , 2009 .