Prediction of ultimate bearing capacity of shallow foundations on cohesionless soils: An evolutionary approach

This study proposes an innovative mathematical formula that uses multigene Genetic Programming (GP), a recently developed soft computing technique, to predict the ultimate bearing capacity of shallow foundations on cohesionless soils. The real performance of previously developed approaches is also investigated. The multigene GP-based formula was calibrated and validated using an experimental database consisting of approximately one hundred load tests. One half of the data was obtained from full-scale foundations and the other half was obtained from small-scale laboratory footing load tests. The results revealed that the proposed formula by multigene GP could predict the ultimate bearing capacity precisely under the described conditions with a coefficient of correlation of about 98%. Additionally, a comprehensive parametric study on the proposed multigene GP-based formula was conducted to confirm the new methodology’s geotechnical aspects.

[1]  K. Terzaghi.  Theoretical Soil Mechanics , 1943 .

[2]  Ali Firat Cabalar,et al.  Genetic programming-based attenuation relationship: An application of recent earthquakes in turkey , 2009, Comput. Geosci..

[3]  Peter Nordin,et al.  Genetic programming - An Introduction: On the Automatic Evolution of Computer Programs and Its Applications , 1998 .

[4]  Habib Shahnazari,et al.  Prediction of strain energy-based liquefaction resistance of sand-silt mixtures: An evolutionary approach , 2011, Comput. Geosci..

[5]  Jagadeesh Anmala,et al.  Rainfall-Runoff Modeling Using Artificial Neural Networks , 2010 .

[6]  Hugo George Hiden,et al.  Data-based modelling using genetic programming , 1998 .

[7]  E. Beer,et al.  Experimental Determination of the Shape Factors and the Bearing Capacity Factors of Sand , 1970 .

[8]  J. Brinch Hansen.  AKADEMIET FOR DE TEKNISKE VIDENSKABER , 2008 .

[9]  Dominic P. Searson,et al.  GPTIPS: An Open Source Genetic Programming Toolbox For Multigene Symbolic Regression , 2010 .

[10]  Amir Hossein Gandomi,et al.  A hybrid computational approach to derive new ground-motion prediction equations , 2011, Eng. Appl. Artif. Intell..

[11]  Akbar A. Javadi,et al.  Evaluation of liquefaction induced lateral displacements using genetic programming , 2006 .

[12]  K. P. Sudheer,et al.  Ultimate bearing capacity prediction of shallow foundations on cohesionless soils using neurofuzzy models , 2008 .

[13]  A S Kumbhojkar.  NUMERICAL EVALUATION OF TERZAGHI'S N GAMMA , 1993 .

[14]  Dominic P. Searson,et al.  GPTIPS: Genetic Programming and Symbolic Regression for Matlab , 2009 .

[15]  George Geoffrey Meyerhof,et al.  Some recent research on the bearing capacity of foundations , 1963 .

[16]  Holger R. Maier,et al.  Settlement prediction of shallow foundations on granular soils using B-spline neurofuzzy models , 2003 .

[17]  Wolfgang Banzhaf,et al.  Genetic Programming: An Introduction , 1997 .

[18]  S. W. Hong,et al.  Neural network based prediction of ground surface settlements due to tunnelling , 2001 .

[19]  Akbar A. Javadi,et al.  A new genetic programming model for predicting settlement of shallow foundations , 2007 .

[20]  Mohammad Hassan Baziar,et al.  New Predictive Models for the v max/a max Ratio of Strong Ground Motions using Genetic Programming , 2009 .

[21]  Kim Young-Su,et al.  Use of Artificial Neural Networks in the Prediction of Liquefaction Resistance of Sands , 2006 .

[22]  Braja M. Das,et al.  The effects of foundation width on model tests for the bearing capacity of sand with geogrid reinforcement , 1994 .

[23]  Jong-Heon Lee,et al.  A prediction on mix proportion factor and strength of concrete using neural network , 2003 .

[24]  Kripamoy Sarkar,et al.  Estimation of strength parameters of rock using artificial neural networks , 2010 .

[25]  John R. Koza,et al.  Genetic programming - on the programming of computers by means of natural selection , 1993, Complex adaptive systems.

[26]  Amir Hossein Alavi,et al.  A robust data mining approach for formulation of geotechnical engineering systems , 2011 .

[27]  Malcolm D. Bolton,et al.  Vertical bearing capacity factors for circular and strip footings on Mohr–Coulomb soil , 1993 .

[28]  Aleksandar S. Vesic,et al.  Analysis of Ultimate Loads of Shallow Foundations , 1973 .

[29]  L. Prandtl,et al.  Über die Härte plastischer Körper , 1920 .

[30]  A. S. Kumbhojkar,et al.  Numerical Evaluation of Terzaghi's Nγ , 1993 .

[31]  Murat Karakus,et al.  Function identification for the intrinsic strength and elastic properties of granitic rocks via genetic programming (GP) , 2011, Comput. Geosci..

[32]  Rodrigo Salgado,et al.  Assessment of Variable Uncertainties for Reliability-Based Design of Foundations , 2006 .

[33]  Fernando Schnaid,et al.  BEHAVIOR OF FIVE LARGE SPREAD FOOTINGS IN SAND a , 2000 .

[34]  Amir Hossein Alavi,et al.  Numerical modeling of stress-strain behavior of sand under cyclic loading , 2010 .

[35]  Yaser Jafarian,et al.  Empirical predictive model for the vmax/amax ratio of strong ground motions using genetic programming , 2010, Comput. Geosci..

[36]  Holger R. Maier,et al.  DATA DIVISION FOR DEVELOPING NEURAL NETWORKS APPLIED TO GEOTECHNICAL ENGINEERING , 2004 .

[37]  Amir Hossein Gandomi,et al.  Formulation of soil angle of shearing resistance using a hybrid GP and OLS method , 2011, Engineering with Computers.