Development and material properties of new hybrid plywood from oil palm biomass

Abstract Shortage of wood as a raw material has forced wood-based industries to find alternative local raw materials. Currently, oil palm biomass is undergoing research and development (R & D) and appears to be the most viable alternative. This work examines the conversion of oil palm trunk (OPT) and oil palm empty fruit bunches (OPEFB) into new plywood and analyses its properties. We prepared five-ply veneer hybrid plywood (alternating layers of oil palm trunk veneer and empty fruit bunch mat) with different spread levels (300 g/m 2 and 500 g/m 2 ) of resins (phenol formaldehyde and urea formaldehyde). We then studied the mechanical and physical properties of the plywood. The results show that hybridisation of EFB with OPT improves some properties of plywood, such as bending strength, screw withdrawal and shear strength. The thermal properties of the plywood panels were studied by thermogravimetric analysis (TGA). The panels glued with phenol formaldehyde with a spread level of 500 g/m 2 showed better thermal stability than the other panels. Scanning electron microscope (SEM) was used to study the fibre matrix bonding and surface morphology of the plywood at different glue spread levels of the resins. The fibre–matrix bonding showed good improvement for the hybrid panel glued with 500 g/m 2 phenol formaldehyde.

[1]  A. Issam,et al.  Oil Palm Empty Fruit Bunches (OPEFB) Reinforced in New Unsaturated Polyester Composites , 2008 .

[2]  I. Aydin,et al.  Variation in surface roughness, wettability and some plywood properties after preservative treatment with boron compounds , 2007 .

[3]  N. Yunus,et al.  Evaluation on the suitability of some adhesives for laminated veneer lumber from oil palm trunks , 2009 .

[4]  H. A. Abdul Khalil,et al.  The Effect of Storage Time and Humidity on Mechanical and Physical Properties of Medium Density Fiberboard (MDF) from Oil Palm Empty Fruit Bunch and Rubberwood , 2008 .

[5]  Abdul Rahman Mohamed,et al.  Utilization of oil palm as a source of renewable energy in Malaysia , 2008 .

[6]  Gülser Çelebi,et al.  Nail and screw withdrawal strength of laminated veneer lumber made up hardwood and softwood layers , 2007 .

[7]  A. Khairul,et al.  Chemical Composition, Morphological Characteristics, and Cell Wall Structure of Malaysian Oil Palm Fibers , 2008 .

[8]  R. Tanaka,et al.  Chlorine-free bleaching of kraft pulp from oil palm empty fruit bunches. , 2004 .

[9]  Sabu Thomas,et al.  Water sorption in oil palm fiber reinforced phenol formaldehyde composites , 2002 .

[10]  Sabu Thomas,et al.  The mechanical performance of hybrid phenol-formaldehyde-based composites reinforced with glass and oil palm fibres , 2002 .

[11]  H. Khalil,et al.  Conventional agro-composites from chemically modified fibres , 2007 .

[12]  M. B. Bever,et al.  Concise encyclopedia of composite materials , 1989 .

[13]  John C. F. Walker.  Primary Wood Processing: Principles and Practice , 1993 .

[14]  K. M. Chapman.  Wood-based panels: particleboard, fibreboards and oriented strand board , 2006 .

[15]  Y. Basiron.  Palm oil production through sustainable plantations , 2007 .

[16]  Sabu Thomas,et al.  Mechanical properties of sisal/oil palm hybrid fiber reinforced natural rubber composites , 2004 .

[17]  H. Khalil,et al.  Agro-hybrid Composite: The Effects on Mechanical and Physical Properties of Oil Palm Fiber (EFB)/Glass Hybrid Reinforced Polyester Composites , 2007 .