Preparation of Poly(methylmethacrylate) Microcapsules with Liquid Cores.

Particles with liquid cores and solid shells have been prepared by the controlled phase separation of poly(methylmethacrylate) (PMMA) within the droplets of an oil-in-water emulsion. The oil phase of the emulsion contained poly(methylmethacrylate), a good solvent for the polymer (CH2Cl2), a poor solvent (hexadecane, decane, octanol, or tetrachloromethane), and in some cases acetone (a water soluble co-solvent) to aid emulsification. Emulsions were prepared using a Silverson high-speed stirrer, and the droplet size distributions were determined using a Coulter particle counter. Size distributions were found to be dependent on the nature of the emulsifier, the concentration of acetone in the oil phase, and the concentration of polymer in the oil phase. The good solvent was then removed under reduced pressure, causing the poly(methylmethacrylate) to phase separate within the emulsion droplets. The resultant two-phase particles were characterized by optical microscopy and scanning electron microscopy. Particle morphologies depended strongly on the nature of the non-solvent and also the emulsifier employed. Spreading coefficients were calculated from interfacial tension and contact angle measurements, and were used to account for the morphologies observed. Core/shell microcapsules were formed when hexadecane or decane was used as non-solvent, and only when polymeric emulsifiers were employed. All other combinations yielded "acorn"-shaped particles. The thickness of microcapsule walls was found to be a constant fraction of the overall capsule diameter for all microcapsule sizes and depended, as expected, on the concentration of polymer in the oil phase. Copyright 1998 Academic Press.

[1]  Souheng Wu,et al.  Surface and interfacial tensions of polymer melts. II. Poly(methyl methacrylate), poly(n-butyl methacrylate), and polystyrene , 1970 .

[2]  Y. Lu,et al.  Variation of surface unevenness of anomalous composite polymer particles produced by the stepwise heterocoagulation of small particles onto large particle by heat treatment , 1994 .

[3]  R. Arshady.  Albumin microspheres and microcapsules: Methodology of manufacturing techniques , 1990 .

[4]  B. Kronberg,et al.  Microencapsulation of emulsified oil droplets by in-situ vinyl polymerization. , 1989, Journal of microencapsulation.

[5]  H. Noguchi,et al.  Functional capsule membranes. 26. Permeability control of polymer-grafted capsule membranes responding to ambient pH changes , 1987 .

[6]  H. Tompa,et al.  Phase relationships in polymer solutions , 1949 .

[7]  R. Arshady,et al.  Microspheres and microcapsules, a survey of manufacturing techniques: Part III: Solvent evaporation , 1990 .

[8]  Y. He,et al.  Analysis of ″stepwise″ heterocoagulation process of small cationic polymer particles onto large anionic polymer particles using dynamic light scattering , 1991 .

[9]  F. Dumont,et al.  Heterocoagulation between small and large colloidal particles. Part I. Equilibrium aspects , 1990 .

[10]  H. Nalwa.  Handbook of organic conductive molecules and polymers , 1997 .

[11]  M. El-Aasser,et al.  Particle morphology in artificial composite polymer latex systems , 1992 .

[12]  S. G. Mason,et al.  Three-phase interactions in shear and electrical fields , 1970 .

[13]  Y. He,et al.  Production of anomalous polymer microspheres having uneven surfaces by “stepwise” heterocoagulation technique , 1990 .

[14]  R. Ottewill,et al.  Preparation of composite latex particles by engulfment , 1996 .

[15]  R. Aveyard,et al.  Thermodynamic properties of aliphatic hydrocarbon/water interfaces , 1965 .

[16]  Robert Langer,et al.  Polyanhydride microspheres as drug carriers. II. Microencapsulation by solvent removal , 1988 .

[17]  M. Schneider,et al.  Impact modification of thermoplastics by methyl methacrylate and styrene-grafted natural rubber latexes , 1995 .

[18]  K. Ichikawa.  Dynamic mechanical properties of polyurethane–urea microcapsules on coated paper , 1994 .

[19]  W. Higuchi,et al.  Physical degradation of emulsions via the molecular diffusion route and the possible prevention thereof. , 1962, Journal of pharmaceutical sciences.

[20]  A. Goebel,et al.  Interfacial Tension of the Water/n-Alkane Interface , 1997 .

[21]  A. Ravve,et al.  Principles of Polymer Chemistry , 1995 .

[22]  R. Arshady,et al.  Microspheres and microcapsules, a survey of manufacturing techniques Part II: Coacervation , 1990 .

[23]  M. El-Aasser,et al.  Interfacial phenomena controlling particle morphology of composite latexes , 1991 .

[24]  B. Vincent,et al.  The adsorption of small particles onto larger particles of opposite charge Direct electron microscope studies , 1992 .

[25]  G. Schweiger,et al.  Synthesis of spherical microcapsules by photopolymerization in aerosols , 1997 .

[26]  R. Ottewill,et al.  Preparation of core-shell polymer colloid particles by encapsulation , 1997 .

[27]  T. Tadros,et al.  The controlled flocculation of particulate dispersions using small particles of opposite charge. II. Investigation of floc structure using a freeze-fracture technique , 1983 .