A High Frame Rate Wearable EIT System Using Active Electrode ASICs for Lung Respiration and Heart Rate Monitoring

A high specification, wearable, electrical impedance tomography (EIT) system with 32 active electrodes is presented. Each electrode has an application specific integrated circuit (ASIC) mounted on a flexible printed circuit board, which is then wrapped inside a disposable fabric cover containing silver-coated electrodes to form the wearable belt. It is connected to a central hub that operates all the 32 ASICs. Each ASIC comprises a high-performance current driver capable of up to 6 mA<sub>p-p</sub> output, a voltage buffer for EIT and heart rate signal recording as well as contact impedance monitoring, and a sensor buffer that provides multi-parameter sensing. The ASIC was designed in a CMOS 0.35-<inline-formula> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> high-voltage process technology. It operates from ±9 V power supplies and occupies a total die area of 3.9 mm<sup>2</sup>. The EIT system has a bandwidth of 500 kHz and employs two parallel data acquisition channels to achieve a frame rate of 107 frames/s, the fastest wearable EIT system reported to date. Measured results show that the system has a measurement accuracy of 98.88% and a minimum EIT detectability of 0.86 <inline-formula> <tex-math notation="LaTeX">$\Omega $ </tex-math></inline-formula>/frame. Its successful operation in capturing EIT lung respiration and heart rate biosignals from a volunteer is demonstrated.

[1]  Hoi-Jun Yoo,et al.  A 10.4 mW Electrical Impedance Tomography SoC for Portable Real-Time Lung Ventilation Monitoring System , 2014, IEEE Journal of Solid-State Circuits.

[2]  David S. Holder,et al.  Parallel, multi frequency EIT measurement, suitable for recording impedance changes during epilepsy , 2015 .

[3]  Andy Adler,et al.  Electrical impedance tomography system based on active electrodes , 2012, Physiological measurement.

[4]  Marvin Onabajo,et al.  Instrumentation amplifier input capacitance cancellation for biopotential and bioimpedance measurements , 2014, 2014 IEEE 57th International Midwest Symposium on Circuits and Systems (MWSCAS).

[5]  Keith D. Paulsen,et al.  A Broadband High-Frequency Electrical Impedance Tomography System for Breast Imaging , 2008, IEEE Transactions on Biomedical Engineering.

[6]  M. Miedema,et al.  Unilateral atelectasis in a preterm infant monitored with electrical impedance tomography: a case report , 2014, European Journal of Pediatrics.

[7]  Roberto Guerrieri,et al.  Active Electrode IC for EEG and Electrical Impedance Tomography With Continuous Monitoring of Contact Impedance , 2015, IEEE Transactions on Biomedical Circuits and Systems.

[8]  Richard H. Bayford,et al.  Design of a CMOS active electrode IC for wearable electrical impedance tomography systems , 2016, 2016 IEEE International Symposium on Circuits and Systems (ISCAS).

[9]  M. Miedema,et al.  Individualized Multiplanar Electrical Impedance Tomography in Infants to Optimize Lung Monitoring , 2017, American journal of respiratory and critical care medicine.

[10]  A Biguri,et al.  Tracking boundary movement and exterior shape modelling in lung EIT imaging. , 2015, Physiological measurement.

[11]  Alexander S Ross,et al.  Current source design for electrical impedance tomography. , 2003, Physiological measurement.

[12]  Youchang Kim,et al.  A 4.9 mΩ-Sensitivity Mobile Electrical Impedance Tomography IC for Early Breast-Cancer Detection System , 2015, IEEE Journal of Solid-State Circuits.

[13]  A Tizzard,et al.  Torso shape detection to improve lung monitoring , 2018, Physiological measurement.

[14]  Richard H. Bayford,et al.  High-Power CMOS Current Driver With Accurate Transconductance for Electrical Impedance Tomography , 2014, IEEE Transactions on Biomedical Circuits and Systems.

[15]  Yu Wu,et al.  On the application of frequency selective common mode feedback for multifrequency EIT , 2015, Physiological measurement.

[16]  Neil Marlow,et al.  Lung Function and Respiratory Symptoms at 11 Years in Children Born Extremely Preterm: The Epicure Study , 2011, Pediatrics.

[17]  Caroline A Grant,et al.  Lung recruitment and endotracheal suction in ventilated preterm infants measured with electrical impedance tomography , 2014, Journal of paediatrics and child health.

[18]  R H Smallwood,et al.  Mk3.5: a modular, multi-frequency successor to the Mk3a EIS/EIT system. , 2001, Physiological measurement.

[19]  Youchang Kim,et al.  18.4 A 4.9mΩ-sensitivity mobile electrical impedance tomography IC for early breast-cancer detection system , 2014, 2014 IEEE International Solid-State Circuits Conference Digest of Technical Papers (ISSCC).

[20]  Eung Je Woo,et al.  Multi-Frequency Electrical Impedance Tomography System With Automatic Self-Calibration for Long-Term Monitoring , 2014, IEEE Transactions on Biomedical Circuits and Systems.

[21]  D S Holder,et al.  A review of errors in multi-frequency EIT instrumentation , 2007, Physiological measurement.

[22]  E. Sivieri,et al.  Evaluation of bedside pulmonary function in the neonate: From the past to the future , 2015, Pediatric pulmonology.

[23]  Andreas Demosthenous,et al.  Wearable sensors for patient-specific boundary shape estimation to improve the forward model for electrical impedance tomography (EIT) of neonatal lung function , 2014, Physiological measurement.

[24]  Eung Je Woo,et al.  A fully parallel multi-frequency EIT system with flexible electrode configuration: KHU Mark2 , 2011, Physiological measurement.

[25]  Alexander März,et al.  Performance of Novel Patient Interface for Electrical Impedance Tomography Applications , 2017 .

[26]  Ryan J. Halter,et al.  FPGA-Based Voltage and Current Dual Drive System for High Frame Rate Electrical Impedance Tomography , 2015, IEEE Transactions on Medical Imaging.

[27]  G.J. Saulnier,et al.  ACT3: a high-speed, high-precision electrical impedance tomograph , 1991, IEEE Transactions on Biomedical Engineering.

[28]  Andy Adler,et al.  A Resistive Mesh Phantom for Assessing the Performance of EIT Systems , 2010, IEEE Transactions on Biomedical Engineering.