Study on ultrasonic vibration-assisted adhesive bonding of CFRP laminates with laser ablation-treated surfaces

[1]  E. Akman,et al.  Comparison of novel surface treatments of Al 2024 alloy for al/cfrp adhesive bonded joints , 2020 .

[2]  E. Akman,et al.  Investigation of the differences between photochemical and photothermal laser ablation on the shear strength of CFRP/CFRP adhesive joints , 2020 .

[3]  Sung-Youl Bae,et al.  A study on the lightweight design of lift structure by composite materials , 2020 .

[4]  D. Baek,et al.  Enhanced Surface Properties of Carbon Fiber Reinforced Plastic by Epoxy Modified Primer with Plasma for Automotive Applications , 2020, Polymers.

[5]  Bo Chen,et al.  Influence of laser process parameters on the characteristic of 30CrMnSiA steel substrate and adhesively bonded joints , 2020 .

[6]  X. Ni,et al.  Influence of surface treatment with infrared nanosecond laser on adhesion performance of adhesion-bonded carbon fiber/epoxy composite , 2020 .

[7]  E. Sacco,et al.  Laser treatment surface: An innovative method to increase the adhesive bonding of ENF joints in CFRP , 2020 .

[8]  Longsheng Lu,et al.  Shear strength of bonded joints of carbon fiber reinforced plastic (CFRP) laminates enhanced by a two-step laser surface treatment , 2020 .

[9]  Jing Chen,et al.  Mechanical Property and Structure of Polypropylene/Aluminum Alloy Hybrid Prepared via Ultrasound-Assisted Hot-Pressing Technology , 2020, Materials.

[10]  Min Wu,et al.  Study on promotion of interface adhesion by ultrasonic vibration for CFRP/Al alloy joints , 2020, Journal of Adhesion Science and Technology.

[11]  Yongming Liu,et al.  Enhanced comprehensive performance of bonding interface between CFRP and steel by a novel film adhesive , 2019 .

[12]  Y. Du,et al.  Enhancing mechanical properties of adhesive laminates joints using ultrasonic vibration-assisted preprocessing , 2019, Composite Structures.

[13]  Hui Wang,et al.  Mechanism study of bubble removal in narrow viscous fluid by using ultrasonic vibration , 2019, Japanese Journal of Applied Physics.

[14]  X. Zhan,et al.  Effect of Scanning Speed with UV Laser Cleaning on Adhesive Bonding Tensile Properties of CFRP , 2019, Applied Composite Materials.

[15]  B. Fiedler,et al.  Effect of infrared laser surface treatment on the morphology and adhesive properties of scarfed CFRP surfaces , 2019, Composites Part A: Applied Science and Manufacturing.

[16]  Q. Gong,et al.  Experimental and Theoretical Investigation of Laser Pretreatment on Strengthening the Heterojunction between Carbon Fiber-Reinforced Plastic and Aluminum Alloy. , 2019, ACS applied materials & interfaces.

[17]  Z. Dawei,et al.  Review on Joining Process of Carbon Fiber-Reinforced Polymer and Metal: Methods and Joining Process , 2018, Rare Metal Materials and Engineering.

[18]  Keke Zhang,et al.  Influence of Ultrasonic Vibration Power on the Wettability and Interfacial Microstructure of Sn2.5Ag0.7Cu0.1RE0.05Ni Solder Alloy on Cu Substrate , 2018, IOP Conference Series: Materials Science and Engineering.

[19]  J. Min,et al.  The effect of laser ablation treatment on the chemistry, morphology and bonding strength of CFRP joints , 2018, International Journal of Adhesion and Adhesives.

[20]  C. Leone,et al.  Effects of surface laser treatment on direct co-bonding strength of CFRP laminates , 2018, Composite Structures.

[21]  M. Geistbeck,et al.  UV-laser cleaning and surface characterization of an aerospace carbon fibre reinforced polymer , 2018 .

[22]  H. Riegel,et al.  A comparison of IR- and UV-laser pretreatment to increase the bonding strength of adhesively joined aluminum/CFRP components , 2017 .

[23]  Qiang Liu,et al.  Lightweight design of carbon twill weave fabric composite body structure for electric vehicle , 2013 .

[24]  Fabian Fischer,et al.  Laser Surface Pre-Treatment of CFRP for Adhesive Bonding in Consideration of the Absorption Behaviour , 2012 .

[25]  Yan Xiao,et al.  Design and Construction of Modern Bamboo Bridges , 2010 .

[26]  Laurent Berthe,et al.  A comparative study of three adhesion tests (EN 582, similar to ASTM C633, LASAT (LASer Adhesion Test), and bulge and blister test) performed on plasma sprayed copper deposited on aluminium 2017 substrates , 2006 .

[27]  Constantinos Soutis,et al.  Fibre reinforced composites in aircraft construction , 2005 .