Principles and applications of trans-wafer processing using a 2-μm thulium fiber laser

A self-developed nanosecond-pulsed thulium fiber laser operating at the wavelength λ = 2 μm was used to selectively modify the front and the back surfaces of various uncoated and metal-coated silicon and gallium arsenide wafers utilizing transparency of semiconductors at this wavelength. This novel processing regime was studied in terms of the process parameter variations, i.e., pulse energy and pulse duration, and the corresponding modification fluence thresholds were determined. The results revealed nearly debris-free back surface processing of wafers, in which modifications could be induced without affecting the front surfaces. The back surface modification threshold of Si was significantly higher than at the front surface due to non-linear absorption and aberration effects observed in experiments. A qualitative study of the underlying physical mechanisms responsible for material modification was performed, including basic analytical modeling and z-scan measurements. Multi-photon absorption, surface-enhanced absorption at nano- and microscopic defect sites, and damage accumulation effects are considered the main physical mechanisms accountable for consistent surface modifications. Applications of trans-wafer processing in removal of thin single- and multi-material layers from the back surface of Si wafers, both in single tracks and large areas, are presented.

[1]  P. Sanders,et al.  Laser surface alloying of silicon into aluminum casting alloys , 2000 .

[2]  M. Richardson,et al.  Amplification of nanosecond pulses to megawatt peak power levels in Tm3+-doped photonic crystal fiber rod. , 2013, Optics letters.

[3]  J. Liu.  Simple technique for measurements of pulsed Gaussian-beam spot sizes. , 1982, Optics letters.

[4]  J. L. Smith.  Surface damage of GaAs from 0.694‐ and 1.06‐μ laser radiation , 1972 .

[5]  H. Driel,et al.  Two-photon absorption and Kerr coefficients of silicon for 850–2200nm , 2007 .

[6]  A. Kruusing.  Handbook of Liquids-Assisted Laser Processing , 2007 .

[7]  Etsuji Ohmura,et al.  Internal modified-layer formation mechanism into silicon with nanosecond laser , 2006 .

[8]  Martin M. Fejer,et al.  Multiphoton absorption and nonlinear refraction of GaAs in the mid-infrared , 2007 .

[9]  I Zergioti,et al.  Ultraviolet femtosecond, picosecond and nanosecond laser microstructuring of silicon: structural and optical properties. , 2008, Applied optics.

[10]  Michael Bass,et al.  Laser Materials Processing , 2018 .

[11]  S. Hendow,et al.  Structuring materials with nanosecond laser pulses. , 2010, Optics express.

[12]  Andreas Ostendorf,et al.  Ablation and cutting of planar silicon devices using femtosecond laser pulses , 2003 .

[13]  Nuggehalli M. Ravindra,et al.  Temperature dependence of the energy gap in semiconductors , 1979 .

[14]  Jian Lu,et al.  Laser-induced damage threshold of silicon in millisecond, nanosecond, and picosecond regimes , 2010 .

[15]  Cesar Jauregui,et al.  2.4 mJ, 33 W Q-switched Tm-doped fiber laser with near diffraction-limited beam quality. , 2013, Optics letters.

[16]  Martin Richardson,et al.  Comparison of higher-order mode suppression and Q-switched laser performance in thulium-doped large mode area and photonic crystal fibers. , 2012, Optics express.

[17]  M. Meunier,et al.  Laser-Induced Resistance Fine Tuning of Integrated Polysilicon Thin-Film Resistors , 2011, IEEE Transactions on Electron Devices.

[18]  Leslie L. Burns,et al.  Laser Processing Of Semiconductors - A Production Machine , 1988, Other Conferences.

[19]  A. Rode,et al.  Confined micro-explosion induced by ultrashort laser pulse at SiO2/Si interface , 2014 .

[20]  A. Kapoor,et al.  Laser-induced damage studies in GaAs , 2003 .

[21]  Gerald Earle Jellison,et al.  The temperature dependence of the refractive index of silicon at elevated temperatures at several laser wavelengths , 1986 .

[22]  W. Xia,et al.  Theoretical and experimental study of laser induced damage on GaAs by nanosecond pulsed irradiation , 2011 .

[23]  K. Asakawa,et al.  Accumulative Damage of GaAs and InP Surfaces Induced by Multiple-Laser-Pulse Irradiation , 2008 .

[24]  H. Wiggers,et al.  Excimer laser doping using highly doped silicon nanoparticles , 2013 .

[25]  M. Kumagai,et al.  Advanced Dicing Technology for Semiconductor Wafer—Stealth Dicing , 2006, IEEE Transactions on Semiconductor Manufacturing.

[26]  W. Brown.  Laser Processing of Semiconductors , 1983 .

[27]  G. Srivastava,et al.  Laser induced damage in GaAs at 1.06 μm wavelength: surface effects , 1996 .

[28]  Yun-Shik Lee,et al.  Multi-photon absorption and nonlinear refraction of GaAs in the mid-infrared , 2006, 2006 Conference on Lasers and Electro-Optics and 2006 Quantum Electronics and Laser Science Conference.

[29]  R. Bergmann,et al.  Microsized subsurface modification of mono-crystalline silicon via non-linear absorption , 2012 .

[30]  Martin Richardson,et al.  Lasing in thulium-doped polarizing photonic crystal fiber. , 2011, Optics letters.

[31]  M. Kruer,et al.  Optical heating in semiconductors , 1980 .

[32]  Andreas Tünnermann,et al.  Inscription of optical waveguides in crystalline silicon by mid-infrared femtosecond laser pulses. , 2005, Optics letters.

[33]  Frank Sonntag,et al.  Influence of gas on cutting silicon with solid state laser , 2004, SPIE LASE.

[34]  L. Xue,et al.  Free-form laser consolidation for producing metallurgically sound and functional components , 2000 .

[35]  A. J. Huis in 't Veld,et al.  Two-photon-induced internal modification of silicon by erbium-doped fiber laser. , 2014, Optics express.