In situ spherical B2 CuZr phase reinforced ZrCuNiAlNb bulk metallic glass matrix composite

In situ microlevel spherical B2 CuZr phase reinforced Zr(49.5)Cu(36.45)Ni(4.05)Al(9)Nb(1) bulk metallic glass matrix composite was prepared successfully by the copper mold casting method. It was found that mechanical properties of Zr(50.5)Cu(36.45)Ni(4.05)Al(9) alloy were improved largely due to the Nb addition. The room-temperature compressive fracture strength and plastic strain for Zr(49.5)Cu(36.45)Ni(4.05)Al(9)Nb(1) rod with a diameter of 5 mm reaches 2037 MPa and 8%, respectively. The improvements are attributed to the precipitation of the spherical B2 CuZr phase distributed uniformly in amorphous matrix, which effectively hampers the propagation of shear bands by deflecting them at the interface and by a multiplication mechanism.

[1]  Dominique Schryvers,et al.  Unit cell determination in CuZr martensite by electron microscopy and X-ray diffraction , 1997 .

[2]  W. Johnson,et al.  Mechanical properties of tungsten and steel fiber reinforced Zr41.25Ti13.75Cu12.5Ni10Be22.5 metallic glass matrix composites , 1998 .

[3]  W. Johnson,et al.  Synthesis and characterization of particulate reinforced Zr57Nb5Al10Cu15.4Ni12.6 bulk metallic glass composites , 1999 .

[4]  W. Johnson Bulk Glass-Forming Metallic Alloys: Science and Technology , 1999 .

[5]  A. Inoue Stabilization of metallic supercooled liquid and bulk amorphous alloys , 2000 .

[6]  Hays,et al.  Microstructure controlled shear band pattern formation and enhanced plasticity of bulk metallic glasses containing in situ formed ductile phase dendrite dispersions , 2000, Physical review letters.

[7]  W. Johnson,et al.  Processing, microstructure and properties of ductile metal particulate reinforced Zr57Nb5Al10Cu15.4Ni12.6 bulk metallic glass composites , 2002 .

[8]  Ludwig Schultz,et al.  Novel Ti-base nanostructure–dendrite composite with enhanced plasticity , 2003, Nature materials.

[9]  Hyoung-Seop Kim,et al.  Enhanced plasticity in a bulk amorphous matrix composite: macroscopic and microscopic viewpoint studies , 2005 .

[10]  A. Yavari,et al.  Unusual room-temperature compressive plasticity in nanocrystal-toughened bulk copper-zirconium glass , 2005 .

[11]  C. Shek,et al.  Plasticity-improved Zr–Cu–Al bulk metallic glass matrix composites containing martensite phase , 2005 .

[12]  J. Eckert,et al.  "Work-Hardenable" ductile bulk metallic glass. , 2005, Physical review letters.

[13]  K. Yao,et al.  Superductile bulk metallic glass , 2006 .

[14]  Zushu Hu,et al.  Enhanced plasticity in Mg-based bulk metallic glass composite reinforced with ductile Nb particles , 2006 .

[15]  T. Hufnagel,et al.  Mechanical behavior of amorphous alloys , 2007 .

[16]  Jingxue Sun,et al.  Bulk metallic glasses: Smaller is softer , 2007 .

[17]  J. Eckert,et al.  Mechanical properties of bulk metallic glasses and composites , 2007 .

[18]  K. Yao,et al.  Formation, microstructure and properties of long-period order structure reinforced Mg-based bulk metallic glass composites , 2007 .

[19]  J. Eckert,et al.  Microstructure and mechanical properties of slowly cooled Cu_47.5Zr_47.5Al_5 , 2007 .

[20]  D. V. Louzguine-Luzgin,et al.  Influence of cooling rate on the structure and properties of a Cu–Zr–Ti–Ag glassy alloy , 2008 .

[21]  D. Zhang,et al.  In‐Situ Precipitated Nanocrystal Beneficial to Enhanced Plasticity of Cu‐Zr Based bulk Metallic Glasses , 2008 .

[22]  Douglas C. Hofmann,et al.  Designing metallic glass matrix composites with high toughness and tensile ductility , 2008, Nature.

[23]  J. Eckert,et al.  Microstructural heterogeneities governing the deformation of Cu47.5Zr47.5Al5 bulk metallic glass composites , 2009 .

[24]  Zushu Hu,et al.  Synthesis and characteristics of 80 vol.% tungsten (W) fibre/Zr based metallic glass composite , 2009 .

[25]  J. Eckert,et al.  Deformation-induced martensitic transformation in Cu-Zr-(Al,Ti) bulk metallic glass composites , 2009 .