Hydraulic model of a gas-lift bioreactor with flocculating yeast

The hydraulic model of a gas lift bioreactor, during a continuous alcoholic fermentation by using a strongly flocculating yeast, is analysed. Sucrose at two different concentrations (50 and 100 g/l) was used as substrate and the dilution rate for all the experiments was 1 h−1. The biomass concentrations were between 85 and 110 g dry weight/1. A stimulus response technique was used to obtain the Residence Time Distribution curves, a pulse of a lactose solution being used as the tracer. Mixing time was determined by means of the response to a pulse of an acid tracer. These experiments were carried out by using an on-line data-acquisition system. The bioreactor behaviour is completely homogeneous, except for high substrate and biomass concentrations. A two parameters combined model is necessary, in this case, to fit the experimental data. Mixing times are very low, in the order of 10 seconds.