Process control in ring and rotor spinning

Abstract: Control of process parameters is extremely important in ring and rotor spinning to ensure production of yarns with the desired quality at the highest possible speed and with minimum waste. The chapter discusses the importance of different key process parameters and their influence on process performance and quality of yarns. It also discusses the effect of different factors on those key process parameters.

[1]  B. Özipek,et al.  Effects of Opening Roller Speed on the Fiber and Yarn Properties in Open-End Friction Spinning , 1995 .

[2]  W. B. Fraser,et al.  Air Drag and Friction in the Two-for-One Twister: Results from the Theory , 1993 .

[3]  Zheng-Xue Tang,et al.  Modelling yarn balloon motion in ring spinning , 2007 .

[4]  T. Ghosh,et al.  An Integrated Approach to Dynamic Analysis of the Ring Spinning Process , 1989 .

[6]  Anindya Ghosh,et al.  THE MECHANISM OF END BREAKAGE IN RING SPINNING: A STATISTICAL MODEL TO PREDICT THE END BREAK IN RING SPINNING , 2004 .

[7]  H. Catling,et al.  Traveller-Ring Friction in Spinning , 1962 .

[8]  T. G. King,et al.  Fiber Alignment and Straightening in Opening for Open-End Spinning , 1993 .

[9]  A. E. De Barr,et al.  10—The Rôle of Air Drag in Ring Spinning , 1961 .

[10]  C. A. Lawrence,et al.  Fundamentals of Spun Yarn Technology , 2003 .

[11]  C. Mack.  33—THEORETICAL STUDY OF RING AND CAP SPINNING BALLOON CURVES (WITH AND WITHOUT AIR DRAG) , 1953 .

[12]  C. Mack.  THEORY OF WINDING IN CENTRIFUGE SPINNING , 1956 .

[13]  P. Grosberg.  34—THE TENSION INSIDE THE ROTOR OF A ROTOR-SPINNER , 1984 .

[14]  C. Rahn,et al.  Limit cycle prediction for ballooning strings , 2000 .

[15]  Christopher D. Rahn,et al.  Steady state response and stability of ballooning strings in air , 1998 .

[17]  W. B. Fraser,et al.  On the theory of ring spinning , 1993, Philosophical Transactions of the Royal Society of London. Series A: Physical and Engineering Sciences.

[18]  Zheng-Xue Tang,et al.  Simulation and experimental validation of a ring spinning process , 2006, Simul. Model. Pract. Theory.

[19]  H. W. Krause,et al.  23—THE SIGNIFICANCE OF YARN TENSION IN OPEN-END SPINNING , 1976 .

[20]  J. Crank,et al.  A Theoretical Investigation of Cap and Ring Spinning Systems , 1953 .

[21]  W. B. Fraser,et al.  The Effect of Yarn Elasticity on an Unwinding Balloon , 1992 .

[22]  Christopher D. Rahn,et al.  Modal Analysis of Ballooning Strings With Small Curvature , 2001 .

[23]  C. Mack,et al.  20—MEASUREMENTS OF THE AIR-DRAG OF TEXTILE THREADS , 1954 .

[24]  P. R. Lord,et al.  Handbook of yarn production , 2003 .

[25]  C. Mack.  THEORY OF THE SPINNING BALLOON , 1958 .

[26]  Rong Yin,et al.  Numerical simulation of quasi-stationary ring spinning process linear elastic yarn , 2011 .

[27]  J. G. Martindale,et al.  4—A NEW METHOD OF MEASURING THE IRREGULARITY OF YARNS WITH SOME OBSERVATIONS ON THE ORIGIN OF IRREGULARITIES IN WORSTED SLIVERS AND YARNS , 1945 .

[28]  W. Barrie Fraser,et al.  An Integrated Approach to Dynamic Analysis of the Ring Spinning Process , 1995 .

[29]  M. Axson.  Observation of the Traveller during Spinning , 1954 .

[30]  L. Hunter,et al.  The Production and Properties of Staple-Fibre Yarns Made by Recently Developed Techniques , 1978 .

[31]  W. B. Fraser,et al.  Transient Solutions of the Ring-Spinning Balloon Equations , 1996 .

[33]  S. M. Ishtiaque,et al.  END BREAKAGE IN ROTOR SPINNING: EFFECT OF DIFFERENT VARIABLES ON COTTON YARN END BREAKAGE , 2004 .

[34]  P. R. Lord,et al.  The Twist Structure of Open-End Yarns , 1976 .

[35]  G. G. Lisini,et al.  A Comparison of Stationary and Non-stationary Mathematical Models for the Ring-spinning Process , 1992 .

[36]  E. Oxtoby.  Spun Yarn Technology , 1987 .

[37]  A. E. De Barr,et al.  5—A DESCRIPTIVE ACCOUNT OF YARN TENSIONS AND BALLOON SHAPES IN RING SPINNING , 1958 .

[38]  K. R. Salhotra,et al.  Twist Flow in Ring Spinning , 1967 .

[39]  Subhash K. Batra,et al.  An Integrated Approach to Dynamic Analysis of the Ring Spinning Process , 1989 .