Measurement and analysis of truck transport vibration levels and damage to packaged tangerines during transit

The purpose of this study was to measure the vibration levels in commercial truck shipments in Thailand and observe the effects on packaged fruit. The study measured the vibration levels in two of the most commonly used truck types to ship packaged goods as a function of road condition and vehicle speed. The suspension type on the trailers studied was leaf-spring. The results of damage to packaged tangerine fruit as a function of location in the payload are also presented. The data presented in this study will assist product and package designers to reduce damage in transit. The results showed that vibration levels increased with speed and as a result of road condition. Analysis of variance indicated that three controlling factors, road surface, truck speed and truck type, significantly affected (p ≤ 0.05) peak PSD, PSD* (root mean square) over the frequency range 2–5 Hz, and fruit damage. As expected, based on previous work, an increase in truck speed resulted in an increase in vibration levels and damage to packaged fruit. The laterite road condition produced the highest vibration level for a given truck and travelling speed followed by concrete highway and asphalt road conditions. Fruit damage was found to be greatest in the uppermost container for every combination of road, truck type and travelling speed, which also corresponded to the highest vibration levels recorded. The results showed that a significant amount of damage can occur on unpaved roads (laterite), while the packages are transported from farms and harvesting areas to regional truck terminals. Damage on asphalt road conditions was minimal. This paper provides an updated history of measured and quantified levels of vibration for these specific trucks and road conditions. Copyright © 2005 John Wiley & Sons, Ltd.