CsPbBr3 Nanocrystal Induced Bilateral Interface Modification for Efficient Planar Perovskite Solar Cells
暂无分享,去创建一个
[1] Jiaguo Yu,et al. Enhanced performance of CH3NH3PbI3 perovskite solar cells by excess halide modification , 2021 .
[2] M. Yuan,et al. Reducing the impact of Auger recombination in quasi-2D perovskite light-emitting diodes , 2021, Nature communications.
[3] K. Catchpole,et al. In Situ Formation of Mixed-Dimensional Surface Passivation Layers in Perovskite Solar Cells with Dual-Isomer Alkylammonium Cations. , 2020, Small.
[4] Danjie Liu,et al. Bilayer broadband antireflective coating to achieve planar heterojunction perovskite solar cells with 23.9% efficiency , 2020, Science China Materials.
[5] R. Keshavarzi,et al. Improving Efficiency and Stability of Carbon‐Based Perovskite Solar Cells by a Multifunctional Triple‐Layer System: Antireflective, UV‐Protective, Superhydrophobic, and Self‐Cleaning , 2020 .
[6] Buddhi Sagar Lamsal,et al. Tailoring the Grain Boundaries of Wide‐Bandgap Perovskite Solar Cells by Molecular Engineering , 2020 .
[7] Dong Suk Kim,et al. Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3-V voltage loss , 2020, Science.
[8] Jiaguo Yu,et al. Unique S-scheme heterojunctions in self-assembled TiO2/CsPbBr3 hybrids for CO2 photoreduction , 2020, Nature Communications.
[9] Jiaguo Yu,et al. Graphene‐Based Materials in Planar Perovskite Solar Cells , 2020 .
[10] Xiaopeng Han,et al. Phase degradation of all-inorganic perovskite CsPbI2Br films induced by a p-type CuI granular capping layer , 2020, Science China Materials.
[11] Xiaoqing Jiang,et al. Dion-Jacobson 2D-3D perovskite solar cells with improved efficiency and stability , 2020 .
[12] S. Mhaisalkar,et al. Realizing Reduced Imperfections via Quantum Dots Interdiffusion in High Efficiency Perovskite Solar Cells , 2020, Advanced materials.
[13] Ka-lok Chiu,et al. Full Defects Passivation Enables 21% Efficiency Perovskite Solar Cells Operating in Air , 2020, Advanced Energy Materials.
[14] G. Han,et al. Efficient and stable perovskite solar cell with suppressed defects by employing lead indicator-dithizone. , 2020, Angewandte Chemie.
[15] N. Lewis,et al. Atomic force microscopy: Emerging illuminated and operando techniques for solar fuel research. , 2020, The Journal of chemical physics.
[16] Ki Chul Kim,et al. Influence of a UV-ozone treatment on amorphous SnO2 electron selective layers for highly efficient planar MAPbI3 perovskite solar cells , 2020 .
[17] Yiwang Chen,et al. Stretchable perovskite solar cells with extremely recoverable performance. , 2020, Angewandte Chemie.
[18] A. Jen,et al. Interfacial Modification through a Multifunctional Molecule for Inorganic Perovskite Solar Cells with over 18% Efficiency , 2020, Solar RRL.
[19] P. Iyer,et al. Efficient Trap Passivation of MAPbI3 via Multifunctional Anchoring for High‐Performance and Stable Perovskite Solar Cells , 2020, Advanced Sustainable Systems.
[20] Juan‐Pablo Correa‐Baena,et al. The role of carbon-based materials in enhancing the stability of perovskite solar cells , 2020 .
[21] Hongwei Zhu,et al. Stabilization of highly efficient and stable phase-pure FAPbI3 Perovskite Solar Cells by Molecularly Tailored 2D-Overlayers. , 2020, Angewandte Chemie.
[22] Oskar J. Sandberg,et al. On the Question of the Need for a Built‐In Potential in Perovskite Solar Cells , 2020, Advanced Materials Interfaces.
[23] Jiaguo Yu,et al. Low‐Temperature‐Processed Zr/F Co‐Doped SnO 2 Electron Transport Layer for High‐Efficiency Planar Perovskite Solar Cells , 2020 .
[24] Peter Chen,et al. Synergistic Reinforcement of Built‐In Electric Fields for Highly Efficient and Stable Perovskite Photovoltaics , 2020, Advanced Functional Materials.
[25] Jiaguo Yu,et al. Graphdiyne: A Brilliant Hole Accumulator for Stable and Efficient Planar Perovskite Solar Cells. , 2020, Small.
[26] Yongli Gao,et al. Reducing Surface Halide Deficiency for Efficient and Stable Iodide-Based Perovskite Solar Cells. , 2020, Journal of the American Chemical Society.
[27] Xianjie Liu,et al. Defect‐Passivation Using Organic Dyes for Enhanced Efficiency and Stability of Perovskite Solar Cells , 2020, Solar RRL.
[28] Fengjia Fan,et al. Potassium-Bromide Surface Passivation on CsPbI3-xBrx Nanocrystals for Efficient and Stable Pure Red Perovskite Light Emitting Diodes. , 2020, Journal of the American Chemical Society.
[29] F. Gao,et al. High-Performance Perovskite Light-Emitting Diode with Enhanced Operational Stability Using Lithium Halide Passivation. , 2019, Angewandte Chemie.
[30] Yang Yang,et al. Constructive molecular configurations for surface-defect passivation of perovskite photovoltaics , 2019, Science.
[31] N. Park,et al. Chemical Approaches for Stabilizing Perovskite Solar Cells , 2019, Advanced Energy Materials.
[32] M. S. Jeong,et al. Highly Efficient UV–Visible Photocatalyst from Monolithic 3D Titania/Graphene Quantum Dot Heterostructure Linked by Aminosilane , 2019, Advanced Sustainable Systems.
[33] Jiaguo Yu,et al. In Situ Grown Monolayer N‐Doped Graphene on CdS Hollow Spheres with Seamless Contact for Photocatalytic CO2 Reduction , 2019, Advanced materials.
[34] W. Mai,et al. Atomic-Layer Deposition-Assisted Double-Side Interfacial Engineering for High-Performance Flexible and Stable CsPbBr3 Perovskite Photodetectors toward Visible Light Communication Applications. , 2019, Small.
[35] B. Cheng,et al. Enhanced efficiency of perovskite solar cells by PbS quantum dot modification , 2019, Applied Surface Science.
[36] Ayan A. Zhumekenov,et al. Quantum Dots Supply Bulk- and Surface-Passivation Agents for Efficient and Stable Perovskite Solar Cells , 2019, Joule.
[37] P. Heremans,et al. Black Phosphorus Quantum Dots Induced High‐Quality Perovskite Film for Efficient and Thermally Stable Planar Perovskite Solar Cells , 2019, Solar RRL.
[38] Jinsong Huang,et al. Imperfections and their passivation in halide perovskite solar cells. , 2019, Chemical Society reviews.
[39] Yuanyuan Zhou,et al. Fusing Nanowires into Thin Films: Fabrication of Graded‐Heterojunction Perovskite Solar Cells with Enhanced Performance , 2019, Advanced Energy Materials.
[40] P. Chan,et al. Solution‐Phase Epitaxial Growth of Perovskite Films on 2D Material Flakes for High‐Performance Solar Cells , 2019, Advanced materials.
[41] Hongwei Song,et al. Interfacial Engineering and Photon Downshifting of CsPbBr3 Nanocrystals for Efficient, Stable, and Colorful Vapor Phase Perovskite Solar Cells , 2019, Advanced science.
[42] Jinming Gao,et al. Targeting the Oncogene KRAS Mutant Pancreatic Cancer by Synergistic Blocking of Lysosomal Acidification and Rapid Drug Release. , 2019, ACS nano.
[43] A. Ng,et al. Alkali Chlorides for the Suppression of the Interfacial Recombination in Inverted Planar Perovskite Solar Cells , 2019, Advanced Energy Materials.
[44] Yang Yang,et al. Interface and Defect Engineering for Metal Halide Perovskite Optoelectronic Devices , 2019, Advanced materials.
[45] Ning Wang,et al. Graphdiyne-Doped P3CT-K as an Efficient Hole-Transport Layer for MAPbI3 Perovskite Solar Cells. , 2019, ACS Applied Materials and Interfaces.
[46] Jiaguo Yu,et al. Binary Solvent Engineering for High-Performance Two-Dimensional Perovskite Solar Cells , 2019, ACS Sustainable Chemistry & Engineering.
[47] Jun Lin,et al. An overview on enhancing the stability of lead halide perovskite quantum dots and their applications in phosphor-converted LEDs. , 2019, Chemical Society reviews.
[48] Jiaguo Yu,et al. Effects of Ti precursors on the performance of planar perovskite solar cells , 2018, Applied Surface Science.
[49] Manish Pandey,et al. Interfacial Sulfur Functionalization Anchoring SnO2 and CH3 NH3 PbI3 for Enhanced Stability and Trap Passivation in Perovskite Solar Cells. , 2018, ChemSusChem.
[50] Yuliang Li,et al. Graphdiyne as a Host Active Material for Perovskite Solar Cell Application. , 2018, Nano letters.
[51] Yiming Li,et al. Graphdiyne‐Based Bulk Heterojunction for Efficient and Moisture‐Stable Planar Perovskite Solar Cells , 2018, Advanced Energy Materials.
[52] T. Unold,et al. Visualization and suppression of interfacial recombination for high-efficiency large-area pin perovskite solar cells , 2018, Nature Energy.
[53] Wei Zhang,et al. Defect Engineering toward Highly Efficient and Stable Perovskite Solar Cells , 2018, Advanced Materials Interfaces.
[54] Jiaguo Yu,et al. Enhanced Performance of Planar Perovskite Solar Cell by Graphene Quantum Dot Modification , 2018, ACS Sustainable Chemistry & Engineering.
[55] Yiming Li,et al. From Ultrafast to Ultraslow: Charge-Carrier Dynamics of Perovskite Solar Cells , 2018 .
[56] Hui Bian,et al. 3D–2D–0D Interface Profiling for Record Efficiency All‐Inorganic CsPbBrI2 Perovskite Solar Cells with Superior Stability , 2018 .
[57] G. Wang,et al. High-performance solar cells with induced crystallization of perovskite by an evenly distributed CdSe quantum dots seed-mediated underlayer , 2018 .
[58] Jiaguo Yu,et al. Hole-conductor-free perovskite solar cells prepared with carbon counter electrode , 2018 .
[59] Jiaguo Yu,et al. Enhanced photocurrent density of HTM-free perovskite solar cells by carbon quantum dots , 2018 .
[60] Jinsong Hu,et al. Congeneric Incorporation of CsPbBr3 Nanocrystals in a Hybrid Perovskite Heterojunction for Photovoltaic Efficiency Enhancement , 2018 .
[61] G. Cao,et al. Monolithic MAPbI3 films for high-efficiency solar cells via coordination and a heat assisted process , 2017 .
[62] Yani Chen,et al. Insights into charge carrier dynamics in organo-metal halide perovskites: from neat films to solar cells. , 2017, Chemical Society reviews.
[63] Q. Akkerman,et al. Strongly emissive perovskite nanocrystal inks for high-voltage solar cells , 2016, Nature Energy.
[64] Jingjing Zhao,et al. Low Temperature Solution-Processed Sb:SnO2 Nanocrystals for Efficient Planar Perovskite Solar Cells. , 2016, ChemSusChem.
[65] Gengfeng Zheng,et al. Enhancing Perovskite Solar Cell Performance by Interface Engineering Using CH3NH3PbBr0.9I2.1 Quantum Dots. , 2016, Journal of the American Chemical Society.
[66] Nripan Mathews,et al. Spectral Features and Charge Dynamics of Lead Halide Perovskites: Origins and Interpretations. , 2016, Accounts of chemical research.
[67] Yongbo Yuan,et al. Correlation of energy disorder and open-circuit voltage in hybrid perovskite solar cells , 2016, Nature Energy.
[68] David G. Cooke,et al. Intrinsic femtosecond charge generation dynamics in single crystal CH3NH3PbI3 , 2015, 1507.02179.
[69] Yang Yang,et al. The optoelectronic role of chlorine in CH3NH3PbI3(Cl)-based perovskite solar cells , 2015, Nature Communications.
[70] E. Sargent,et al. Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals , 2015, Science.
[71] He Yan,et al. Efficiency enhancement of perovskite solar cells through fast electron extraction: the role of graphene quantum dots. , 2014, Journal of the American Chemical Society.
[72] M. Grätzel,et al. Title: Long-Range Balanced Electron and Hole Transport Lengths in Organic-Inorganic CH3NH3PbI3 , 2017 .
[73] Zhifu Liu,et al. Crystal Growth of the Perovskite Semiconductor CsPbBr3: A New Material for High-Energy Radiation Detection , 2013 .
[74] Jianwei Liang,et al. Plasmon resonance enhanced optical absorption in inverted polymer/fullerene solar cells with metal nanoparticle-doped solution-processable TiO2 layer. , 2013, ACS applied materials & interfaces.
[75] N. Park,et al. Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9% , 2012, Scientific Reports.
[76] P. Blom,et al. Origin of the Reduced Fill Factor and Photocurrent in MDMO‐PPV:PCNEPV All‐Polymer Solar Cells , 2007 .
[77] J. Ni,et al. Preparation of hysteresis-free flexible perovskite solar cells via interfacial modification , 2021 .
[78] Yue Lu,et al. Photoinduced Degradation of Lead Halide Perovskite Thin Films in Air , 2020 .
[79] A. Rogach,et al. Advances in metal halide perovskite nanocrystals: Synthetic strategies, growth mechanisms, and optoelectronic applications , 2020 .