Study of Poly-SiGe Structural Properties for Modularly Integrated MEMS

Polycrystalline silicon-germanium (poly-SiGe) is an attractive structural material for surface micromachining due to its low deposition temperature (<450C), which enables high performance MEMS devices to be fabricated directly on top of CMOS electronics [1]. Achieving low strain gradient within a low-temperature-deposited polySiGe film remains a major challenge for inertial sensors, which utilize large-area suspended structures that are more prone to warpage. In this work, we characterize the strain gradient of low-temperature-deposited poly-SiGe films using out-of-plane curvature measurements of released cantilever beam arrays, stress-vs.-depth profiles, and cross-sectional TEM analyses.

[1]  P. Garone,et al.  Developing a manufacturable process for the deposition of thick polysilicon films for micromachined devices , 2000, 2000 IEEE/SEMI Advanced Semiconductor Manufacturing Conference and Workshop. ASMC 2000 (Cat. No.00CH37072).

[2]  Micromachining of pulsed laser annealed PECVD SixGe1-x deposited at temperatures <= 370 degrees C , 2005 .

[3]  Roger T. Howe,et al.  Optimization of Poly-SiGe Deposition Processes for Modular MEMS Integration , 2003 .

[4]  Zhihong Li,et al.  Modifying residual stress and stress gradient in LPCVD Si3N4 film with ion implantation , 2006 .

[5]  C. W. Low,et al.  Characterization of Polycrystalline Silicon-Germanium Film Deposition for Modularly Integrated MEMS Applications , 2007, Journal of Microelectromechanical Systems.

[6]  S. Sedky,et al.  Pulsed-laser annealing, a low-thermal-budget technique for eliminating stress gradient in poly-SiGe MEMS structures , 2004, Journal of Microelectromechanical Systems.

[7]  Raji Krishnamoorthy Mali,et al.  Elimination of stress-induced curvature in thin-film structures , 2002 .

[8]  A. Witvrouw,et al.  Optimisation of PECVD poly-SiGe layers for MEMS post-processing on top of CMOS , 2005, The 13th International Conference on Solid-State Sensors, Actuators and Microsystems, 2005. Digest of Technical Papers. TRANSDUCERS '05..

[9]  J. M. Mora,et al.  Processing of MEMS gyroscopes on top of CMOS ICs , 2005, ISSCC. 2005 IEEE International Digest of Technical Papers. Solid-State Circuits Conference, 2005..

[10]  Tsu-Jae King,et al.  Thermal budget limits of quarter-micrometer foundry CMOS for post-processing MEMS devices , 2005, IEEE Transactions on Electron Devices.