Chapter 9 - Adiabatic Calorimetry From 300 to 800°K

[1]  T. Wydeven,et al.  Heat Capacity of Cobalt(II) Bromide from 74 to 450° and a Structural Change in the Vicinity of 370° , 1964 .

[2]  A. E. Kay,et al.  The specific heat of plutonium at high temperatures , 1964 .

[3]  C. R. Brooks,et al.  The effect of heating rate and neutron irradiation on the specific heat behavior of a Cu-16.8 at. % A1 and A Cu-17.2 AT. % Ga solid solution , 1963 .

[4]  E. Westrum,et al.  HEAT CAPACITIES AND THERMODYNAMIC PROPERTIES OF GLOBULAR MOLECULES. VII. TRANSITION AND FUSION OF TRIETHYLENEDIAMINE1 , 1963 .

[5]  E. D. West.  Heat Exchange in Adiabatic Calorimeters , 1963, Journal of research of the National Bureau of Standards. Section A, Physics and chemistry.

[6]  J. Nölting.  Ein adiabatisches Kalorimeter zur Untersuchung schlecht wärmeleitender Substanzen im Temperaturbereich von 50 bis 650 °C , 1963 .

[7]  W. A. Dench.  Adiabatic high-temperature calorimeter for the measurement of heats of alloying , 1963 .

[8]  K. Hellwege,et al.  Spezifische Wärme von Polyolefinen und einigen anderen Hochpolymeren im Temperaturbereich von 30–180 ‡C , 1962 .

[9]  F. Riggs.  Vacuum Sealing of Gold Wire Leads to a Differential Thermopile , 1961 .

[10]  N. Gregory,et al.  THE HEAT CAPACITY OF SOLID IRON(II) CHLORIDE ABOVE ROOM TEMPERATURE , 1961 .

[11]  N. Gregory,et al.  THE HEAT CAPACITY OF AND A TRANSITION IN IRON(II) IODIDE ABOVE ROOM TEMPERATURE , 1961 .

[12]  Y. Hwang.  The constant volume heat capacities of gaseous tetrafluoromethane, chlorodifluoromethanem, dichlorotetrafluoroethane, and chloropentafluoroethane , 1961 .

[13]  W. Bruynooghe,et al.  On the specific heat of Mn Zn-and Ni Zn-Ferrite between 20°C and 350°C , 1960 .

[14]  O. J. Kleppa.  A NEW TWIN HIGH-TEMPERATURE REACTION CALORIMETER. THE HEATS OF MIXING IN LIQUID SODIUM-POTASSIUM NITRATES , 1960 .

[15]  E. D. West.  Techniques in Calorimetry. I. A Noble‐Metal Thermocouple for Differential Use , 1960 .

[16]  Joseph J. Martin,et al.  The constant‐volume heat capacities of gaseous perfluorocyclobutane and propylene , 1960 .

[17]  H. O'neal,et al.  Vacuum Adiabatic Heat Capacity Calorimeter , 1959 .

[18]  H. O'neal,et al.  A Structural Change in Iron(II) Bromide Near 400 , 1959 .

[19]  W. H. Martin,et al.  Apparatus for the measurement of specific heat of metals , 1959 .

[20]  R. E. Pawel,et al.  Adiabatic Calorimeter for Metals in the Range 50 to 1000°C , 1959 .

[21]  E. D. West.  The Heat Capacity of Sulfur from 25 to 450°, the Heats and Temperatures of Transition and Fusion1,2 , 1959 .

[22]  W. Jost,et al.  Die spezifischen Wärmen von Silber- und Kupfer(I)-jodid , 1958 .

[23]  W. Wallace,et al.  Heat Capacities, Entropies and Enthalpies of Tantalum between 12 and 550°K.1,2 , 1958 .

[24]  D. C. Ginnings,et al.  An adiabatic calorimeter for the range 30-degrees-C to 500-degrees-C , 1958 .

[25]  D. C. Ginnings,et al.  Automatic Temperature Regulation and Recording in Precision Adiabatic Calorimetry , 1957 .

[26]  D. C. Ginnings,et al.  The Heat Capacity of Aluminum Oxide in the Range 300 to 700°K , 1957 .

[27]  M. Hirabayashi,et al.  Calorimetric Study of Cu3Au at High Temperatures , 1957 .

[28]  W. Wallace,et al.  MAGNESIUM-CADMIUM ALLOYS. VIII. HEAT CAPACITIES OF Mg$sub 3$Cd AND MgCd$sub 3$ BETWEEN 20 AND 290. THE STANDARD HEATS, FREE ENERGIES AND ENTROPIES OF FORMATION AND THE RESIDUAL ENTROPIES , 1957 .

[29]  Myron A. Belaga,et al.  Modified Adiabatic Calorimeter , 1956 .

[30]  M. Dole,et al.  Calorimetry of High Polymers. III. A New Type of Adiabatic Jacket and Calorimeter , 1955 .

[31]  L. W. Phipps.  An adiabatic calorimeter for measuring the specific heats of liquids in the range 0 to 100° C , 1955 .

[32]  M. Dole,et al.  Calorimetry of High Polymers. I. Automatic Temperature Recording and Control of Adiabatic Jackets , 1951 .

[33]  A. Nathan.  A Dynamic Method for Measuring the Specific Heat of Metals , 1951 .

[34]  K. H. Horowitz,et al.  Modification of Adiabatic Specific Heat Calorimeter , 1949 .

[35]  H. J. Hoge.  Circuits for minimizing transient effects on energy measurements in calorimetry. , 1949, The Review of scientific instruments.

[36]  R. B. Richards,et al.  The heat capacity, heat of solution, and crystallinity of polythene , 1945 .

[37]  J. Winckler.  SPHERICAL FURNACE CALORIMETER FOR DIRECT MEASUREMENT OF SPECIFIC HEAT AND THERMAL CONDUCTIVITY , 1943 .

[38]  W. T. Ziegler,et al.  I. A Modified Heat Conduction Calorimeter1,2 , 1941 .

[39]  J. H. Awbery,et al.  The thermal capacity of pure iron , 1940, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[40]  D. R. Stull.  A Semi-micro Calorimeter for Measuring Heat Capacities at Low Temperatures1 , 1937 .

[41]  D. C. Ginnings,et al.  Calorimetric determination of the thermody_namic properties of saturated water in both the liquid and gaseous states from 100 to 374 degrees C , 1937 .

[42]  D. H. Andrews,et al.  THERMAL ENERGY STUDIES. I. PHENYL DERIVATIVES OF METHANE, ETHANE AND SOME RELATED COMPOUNDS , 1931 .

[43]  H. Seekamp.  Über die Messung wahrer spezifischer Wärmen fester und flüssiger Metalle bei hohen Temperaturen , 1931 .

[44]  G. S. Parks,et al.  Studies on Glass. VI. Some Specific Heat Data on Boron Trioxide , 1930 .

[45]  W. P. White.  Calorimetry in Furnaces , 1929 .

[46]  D. H. Andrews,et al.  AN APPLICATION OF THE RULE OF DULONG AND PETIT TO MOLECULES1,2 , 1928 .

[47]  D. H. Andrews.  THE SPECIFIC HEATS OF SOME ISOMERS OF THE TYPE ORTHO, META AND PARA C6H4XY FROM 110° to 340°K. , 1926 .

[48]  F. Daniels,et al.  THE SPECIFIC HEATS OF CERTAIN ORGANIC LIQUIDS AT ELEVATED TEMPERATURES , 1924 .

[49]  A. G. Worthing.  Atomic heats of tungsten and of carbon at incandescent temperatures , 1918 .