Optimal cuts of langasite, La/sub 3/Ga/sub 5/SiO/sub 14/ for SAW devices

The results of a theoretical and experimental investigation of the SAW propagation characteristics in an optimal region of langasite defined by the Euler angles /spl phi/ from -15/spl deg/ to +10/spl deg/, /spl theta/ from 120/spl deg/ to 165/spl deg/, and /spl psi/ from 20/spl deg/ to 45/spl deg/ are presented. Based on temperature coefficients of the elastic constants derived from experimental data, some optimal orientations of langasite characterized by high electromechanical coupling factor (k/sup 2/), zero power flow angle (PFA) and low or zero temperature coefficient of frequency (TCF) were found. The SAW velocity in the region of interest is highly anisotropic; this results in a significant amount of diffraction, which must be taken into account in the search for orientations useful for SAW devices. An orientation having simultaneously zero PFA, zero TCF, negligible diffraction, and relatively high piezoelectric coupling has been found and verified experimentally. The experimental results are in excellent agreement with the calculated SAW characteristics. The frequency response of a SAW device fabricated on the optimal cut of langasite is presented and demonstrates that high performance SAW filters can be realized on this optimal cut of langasite.

[1]  L. P. Solie,et al.  Optimal cut of langasite for high performance SAW devices , 1999, 1999 IEEE Ultrasonics Symposium. Proceedings. International Symposium (Cat. No.99CH37027).

[2]  S. Uda,et al.  Analysis of Surface Acoustic Wave Properties of the Rotated Y-cut Langasite Substrate , 1999 .

[3]  S. Ballandras,et al.  Experimental measurements of velocities and temperature effects for SAW on Y-rotated and X-cuts of Langasite , 1999, Proceedings of the 1999 Joint Meeting of the European Frequency and Time Forum and the IEEE International Frequency Control Symposium (Cat. No.99CH36313).

[4]  R. Taziev.  Langasite: what temperature coefficients of material constants are correct? , 1999, Proceedings of the 1999 Joint Meeting of the European Frequency and Time Forum and the IEEE International Frequency Control Symposium (Cat. No.99CH36313).

[5]  M. Kadota,et al.  Surface acoustic wave properties on various rotated Y-cut langasite crystal substrates grown by Czochralski method , 1998, 1998 IEEE Ultrasonics Symposium. Proceedings (Cat. No. 98CH36102).

[6]  M. Takeuchi,et al.  SAW reflection characteristics and NSPUDT orientations on langasite , 1998, 1998 IEEE Ultrasonics Symposium. Proceedings (Cat. No. 98CH36102).

[7]  Kenji Inoue,et al.  Propagation Characteristics of Surface Acoustic Waves on Langasite , 1998 .

[8]  D.C. Malocha.  High frequency SAW devices , 1997, 1997 IEEE MTT-S International Microwave Symposium Digest.

[9]  V. V. Nechaev,et al.  A new approach to the growth of langasite crystals , 1996, Proceedings of 1996 IEEE International Frequency Control Symposium.

[10]  Y. Pisarevsky,et al.  New data on temperature stability and acoustical losses of langasite crystals , 1995, Proceedings of the 1995 IEEE International Frequency Control Symposium (49th Annual Symposium).

[11]  G. Mansfeld.  Measurements of acoustic wave attenuation in La/sub 3/Ga/sub 5/SiO/sub 14/ using HBAR technique , 1994, Proceedings of IEEE 48th Annual Symposium on Frequency Control.

[12]  L. A. Shabanova,et al.  Temperature Dependence of Electromechanical Properties of LGS Crystals , 1986, December 16.

[13]  A. Kaminskii,et al.  Investigation of trigonal (La1-xNdx)3Ga5SiO14 crystals. II. Spectral laser and electromechanical properties , 1983 .

[14]  K. Lau,et al.  High Frequency SAW Devices on AlN/Al 2 O 3 , 1978 .