Bent-beam electro-thermal actuators for high force applications

This paper describes in-plane microactuators fabricated by standard microsensor materials and processes that can generate forces up to about a milli-newton. They operate by leveraging the deformations produced by localized thermal stresses. Analytical and finite element models of device performance are presented along with measured results of fabricated devices using electroplated Ni, LPCVD polysilicon, and p/sup ++/ Si as structural materials. A maskless process extension for incorporating thermal and electrical isolation is outlined. Test results show that static displacements of /spl ap/10 /spl mu/m can be achieved with power dissipation of /spl ap/100 mW, and output forces >300 /spl mu/N can be achieved with input power <250 mW. It is also shown that cascaded devices offer a 4/spl times/ improvement in displacement. The displacements are rectilinear, and the output forces generated are 10/spl times/-100/spl times/ higher than those available from other comparable options. This performance is achieved at much lower drive voltages than necessary for electrostatic actuation, indicating that bent-beam thermal actuators are suitable for integration in a variety of microsystems.

[1]  William C. Tang,et al.  Laterally driven polysilicon resonant microstructures , 1989, IEEE Micro Electro Mechanical Systems, , Proceedings, 'An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots'.

[2]  K. Najafi,et al.  A bulk silicon dissolved wafer process for microelectromechanical devices , 1992 .

[3]  T. Christenson,et al.  Thermo-magnetic metal flexure actuators , 1992, Technical Digest IEEE Solid-State Sensor and Actuator Workshop.

[4]  Gregory T. A. Kovacs,et al.  Silicon Fusion Bonding and Deep Reactive Ion Etching a New Technology for Microstructures , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[5]  J. M. Noworolski,et al.  Silicon fusion bonding and deep reactive ion etching: a new technology for microstructures , 1996 .

[6]  K. Najafi,et al.  Bent-beam strain sensors , 1996 .

[7]  M. A. Michalicek,et al.  Characterization of electrothermal actuators and arrays fabricated in a four-level, planarized surface-micromachined polycrystalline silicon process , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[8]  E. J. Garcia.  Micro-flex mirror and instability actuation technique , 1998, Proceedings MEMS 98. IEEE. Eleventh Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems (Cat. No.98CH36176.

[9]  Y. Gianchandani,et al.  A micromachined strain sensor with differential capacitive readout , 1999, Technical Digest. IEEE International MEMS 99 Conference. Twelfth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.99CH36291).