Application of Taguchi method for optimization of process parameters in decalcification of samarium–cobalt intermetallic powder

Abstract Decalcification studies on samarium–cobalt intermetallic alloy powder produced by reduction–diffusion process have been carried out under wide range of experimental conditions based on Taguchi method. This approach has been adopted to arrive at optimum conditions for the leaching operation for calcium removal without affecting the yield of Sm 2 Co 17 . The percentage effect of number of water wash, acid wash, pH and digestion time on decalcification was investigated. Conditions predicted by Taguchi method successfully brought down the residual calcium value to about 1750 ppm in Sm 2 Co 17 suitable for further operation related to making permanent magnet. The Sm 2 Co 17 phase was found to be stable even after long period of leaching operations as characterized by scanning electron microscopy and X-ray diffraction. Leaching of calcium from large batch product samples have been demonstrated successfully with 99.5% yield and residual calcium in the range of 1740–1750 ppm. Acetic acid and propionic acid showed comparable results in decalcification.

[1]  Satoshi Hirosawa,et al.  Nd–Fe–B Permanent Magnet Materials , 1987 .

[2]  Recent progress in 2:17-type permanent magnets , 1992 .

[3]  R. Cech.  Cobalt-rare earth intermetallic compounds produced by calcium hydride reduction of oxides , 1974 .

[4]  S. Banerjee,et al.  Optimization of parameters by Taguchi method for controlling purity of carbon nanotubes in chemical vapour deposition technique. , 2010, Journal of nanoscience and nanotechnology.

[5]  H. R. Kirchmayr.  Permanent magnets and hard magnetic materials , 1996 .

[6]  Shekar D. Bhame,et al.  Exchange Coupled Nd 2 Fe 14 B/ α -Fe Nanocomposite by Novel Autocombustion-Reduction Diffusion Synthesis , 2010 .

[7]  Hian Kee Lee,et al.  Optimization of microwave-assisted solvent extraction of polycyclic aromatic hydrocarbons in marine sediments using a microwave extraction system with high-performance liquid chromatography-fluorescence detection and gas chromatography-mass spectrometry , 1996 .

[8]  David Brown,et al.  Developments in the processing and properties of NdFeb-type permanent magnets , 2002 .

[9]  A. Sam,et al.  Determination of optimum process conditions for the separation of thorium and rare earth elements by solvent extraction , 2011 .

[10]  Satoshi Sugimoto,et al.  Current status and recent topics of rare-earth permanent magnets , 2011 .

[11]  H. Nakamura,et al.  結晶粒界拡散過程により作製したNd―Fe―B焼結磁石における保磁力分布 , 2011 .

[12]  K. Saberyan,et al.  Determination of optimum process conditions for the extraction and separation of zirconium and hafnium by solvent extraction , 2008 .

[13]  Genichii Taguchi,et al.  Introduction to quality engineering. designing quality into products a , 1986 .

[14]  J. Ormerod.  The physical metallurgy and processing of sintered rare earth permanent magnets , 1985 .

[15]  Ling Li,et al.  Synthesis and Photoluminescence Properties of Hierarchical Zinc Germanate Nanostructures , 2010 .

[16]  P. Campbell.  Permanent Magnet Materials and their Application: Applications , 1994 .

[17]  D. Stamatis,et al.  Orthogonal Arrays and Linear Graphs , 2002 .