Fuel cell-powered microfluidic platform for lab-on-a-chip applications: Integration into an autonomous amperometric sensing device.

The present paper reports for the first time the integration of a microfluidic system, electronics modules, amperometric sensor and display, all powered by a single micro direct methanol fuel cell. In addition to activating the electronic circuitry, the integrated power source also acts as a tuneable micropump. The electronics fulfil several functions. First, they regulate the micro fuel cell output power, which off-gas controls the flow rate of different solutions toward an electrochemical sensor through microfluidic channels. Secondly, as the fuel cell powers a three-electrode electrochemical cell, the electronics compare the working electrode output signal with a set reference value. Thirdly, if the concentration measured by the sensor exceeds this threshold value, the electronics switch on an integrated organic display. This integrated approach pushes forward the development of truly autonomous point-of-care devices relying on electrochemical detection.

[1]  David E. Williams,et al.  Point of care diagnostics: status and future. , 2012, Analytical chemistry.

[2]  N. Sabaté,et al.  Fabrication and characterization of a passive silicon-based direct methanol fuel cell , 2008 .

[3]  Allen J. Bard,et al.  Electrochemical Methods: Fundamentals and Applications , 1980 .

[4]  Josep Samitier,et al.  Fuel cell-powered microfluidic platform for lab-on-a-chip applications. , 2012, Lab on a chip.

[5]  Paul Yager,et al.  Transport in two-dimensional paper networks , 2011, Microfluidics and nanofluidics.

[6]  G. Whitesides,et al.  Patterned paper as a platform for inexpensive, low-volume, portable bioassays. , 2007, Angewandte Chemie.

[7]  S. T. Phillips,et al.  Metering the capillary-driven flow of fluids in paper-based microfluidic devices. , 2010, Analytical chemistry.

[8]  R. Zengerle,et al.  Microfluidic lab-on-a-chip platforms: requirements, characteristics and applications. , 2010, Chemical Society reviews.

[9]  Tetsuya Osaka,et al.  Bendable fuel cells: on-chip fuel cell on a flexible polymer substrate , 2009 .

[10]  Leif Nyholm,et al.  Electrochemical techniques for lab-on-a-chip applications. , 2005, The Analyst.

[11]  Itamar Willner,et al.  Electroanalytical and Bioelectroanalytical Systems Based on Metal and Semiconductor Nanoparticles , 2004 .

[12]  Samuel K Sia,et al.  Commercialization of microfluidic point-of-care diagnostic devices. , 2012, Lab on a chip.

[13]  R. Compton,et al.  Mass Transport to Nanoelectrode Arrays and Limitations of the Diffusion Domain Approach: Theory and Experiment , 2009 .

[14]  Hua-Zhong Yu,et al.  Design and testing of aptamer-based electrochemical biosensors for proteins and small molecules. , 2009, Bioelectrochemistry.

[15]  L. Gervais,et al.  Microfluidic Chips for Point‐of‐Care Immunodiagnostics , 2011, Advanced materials.

[16]  E. Baldrich,et al.  Biosensing at disk microelectrode arrays. Inter-electrode functionalisation allows formatting into miniaturised sensing platforms of enhanced sensitivity. , 2009, Biosensors & bioelectronics.

[17]  N. Allbritton,et al.  Micro total analysis systems for cell biology and biochemical assays. , 2012, Analytical chemistry.

[18]  Jordi Colomer-Farrarons,et al.  A CMOS Self-Powered Front-End Architecture for Subcutaneous Event-Detector Devices: Three-Electrodes Amperometric Biosensor Approach , 2011 .

[19]  M. Lörgen,et al.  Towards a compact SU-8 micro-direct methanol fuel cell , 2010 .