Flotation separation of polyvinyl chloride and polyethylene terephthalate plastics combined with surface modification for recycling.

Surface modification with potassium permanganate (KMnO4) solution was developed for separation of polyvinyl chloride (PVC) and polyethylene terephthalate (PET) waste plastics. The floatability of PVC decreases with increasing of KMnO4 concentration, treatment time, temperature and stirring rate, while that of PET is unaffected. Fourier transform infrared (FT-IR) analysis confirms that mechanism of surface modification may be due to oxidization reactions occurred on PVC surface. The optimum conditions are KMnO4 concentration 1.25 mM/L, treatment time 50 min, temperature 60°C, stirring rate 300 r/min, frother concentration 17.5 g/L and flotation time 1 min. PVC and PET with different particle sizes were separated efficiently through two-stage flotation. Additionally, after ultrasonic assisted surface modification, separation of PVC and PET with different mass ratios was obtained efficiently through one-stage flotation. The purity and the recovery of the obtained products after flotation separation are up to 99.30% and 99.73%, respectively. A flotation process was designed for flotation separation of PVC and PET plastics combined with surface modification. This study provides technical insights into physical separation of plastic wastes for recycling industry.

[1]  Mohammad Mehdi Salarirad,et al.  SELECTIVE SEPARATION OF PVC FROM PET/PVC MIXTURE USING FLOATATION BY TANNIC ACID DEPRESSANT , 2010 .

[2]  A. Marcilla,et al.  Study of the migration of PVC plasticizers , 2004 .

[3]  T. Okuda,et al.  Surface ozonation of polyvinyl chloride for its separation from waste plastic mixture by froth floatation , 2010 .

[4]  Tetsuji Okuda,et al.  Separation of polyvinyl chloride (PVC) from automobile shredder residue (ASR) by froth flotation with ozonation. , 2007, Journal of hazardous materials.

[5]  M. Sadat‐Shojai,et al.  Recycling of PVC wastes , 2011 .

[6]  Heather L. MacLean,et al.  The role of product information in automotive plastics recycling: a financial and life cycle assessment , 2007 .

[7]  Sangobtip Pongstabodee,et al.  Separation of mixed post-consumer PET–POM–PVC plastic waste using selective flotation , 2007 .

[8]  Andrew D.F. Price,et al.  Assessing the recycling potential of glass fibre reinforced plastic waste in concrete and cement composites , 2009 .

[9]  Tetsuji Okuda,et al.  Separation of Polyvinyl Chloride from Plastic Mixture by Froth Flotation after Surface Modification with Ozone , 2007 .

[10]  Hui Wang,et al.  Boiling treatment of ABS and PS plastics for flotation separation. , 2014, Waste management.

[11]  Somsak Saisinchai,et al.  Separation of PVC from PET/PVC Mixtures Using Flotation by Calcium Lignosulfonate Depressant , 2014 .

[12]  Ali Güney,et al.  Selective separation of virgin and post-consumer polymers (PET and PVC) by flotation method. , 2009, Waste management.

[13]  Dietrich Braun,et al.  Recycling of PVC , 2002 .

[14]  Helmut Rechberger,et al.  Influence of waste plastic utilisation in blast furnace on heavy metal emissions , 2015 .

[15]  Hui Wang,et al.  Separation of polycarbonate and acrylonitrile-butadiene-styrene waste plastics by froth flotation combined with ammonia pretreatment. , 2014, Waste management.

[16]  Rusong Wang,et al.  Characteristics and the recovery potential of plastic wastes obtained from landfill mining , 2014 .

[17]  S. Ramesh,et al.  Conductivity, dielectric behavior and FTIR studies of high molecular weight poly(vinylchloride)–lithium triflate polymer electrolytes , 2007 .

[18]  Sangobtip Pongstabodee,et al.  Combination of three-stage sink-float method and selective flotation technique for separation of mixed post-consumer plastic waste. , 2008, Waste management.

[19]  M. Siddiqui.  Conversion of hazardous plastic wastes into useful chemical products. , 2009, Journal of hazardous materials.

[20]  R. D. Pascoe,et al.  Flame treatment for the selective wetting and separation of PVC and PET. , 2003, Waste management.

[21]  Younian Liu,et al.  Separation of polyethylene terephthalate from municipal waste plastics by froth flotation for recycling industry. , 2015, Waste management.

[22]  Jorge Alberto Soares Tenório,et al.  Use of froth flotation to separate PVC/PET mixtures , 2000 .

[23]  A. Buekens,et al.  Comparative evaluation of techniques for controlling the formation and emission of chlorinated dioxins/furans in municipal waste incineration , 1998 .

[24]  N. Ince,et al.  Ultrasound as a catalyzer of aqueous reaction systems: the state of the art and environmental applications , 2001 .

[25]  Jaroslaw Drelich,et al.  SELECTIVE FROTH FLOTATION OF PVC FROM PVC/PET MIXTURES FOR THE PLASTICS RECYCLING INDUSTRY , 1998 .

[26]  O Osibanjo,et al.  Toxicity characterization of waste mobile phone plastics. , 2009, Journal of hazardous materials.

[27]  J. H. Kim,et al.  Purification of polyethylene terephthalate from polyvinyl chloride by froth flotation for the plastics (soft-drink bottle) recycling industry , 1999 .