A new multi-function servo control dynamic shear apparatus for geomechanics

[1]  Xueyou Li,et al.  A methodology to investigate fluid flow in sheared rock fractures exposed to dynamic normal load , 2021 .

[2]  Q. Sheng,et al.  A New Direct Shear Apparatus for Rock Joints Specialized in Cyclic Loading , 2021, Rock Mechanics and Rock Engineering.

[3]  S. Wiemer,et al.  HighSTEPS: A High Strain Temperature Pressure and Speed Apparatus to Study Earthquake Mechanics , 2021, Rock Mechanics and Rock Engineering.

[4]  Wei Chen,et al.  Height prediction of water-flowing fracture zone with a genetic-algorithm support-vector-machine method , 2020, International Journal of Coal Science & Technology.

[5]  S. Shreedharan,et al.  Acoustic Energy Release During the Laboratory Seismic Cycle: Insights on Laboratory Earthquake Precursors and Prediction , 2020, Journal of geophysical research. Solid earth.

[6]  M. Violay,et al.  Hydraulic Transport Through Calcite Bearing Faults With Customized Roughness: Effects of Normal and Shear Loading , 2020, Journal of Geophysical Research: Solid Earth.

[7]  Ke Yang,et al.  Fracture behavior and acoustic emission characteristics of sandstone samples with inclined precracks , 2020, International Journal of Coal Science & Technology.

[8]  S. Qi,et al.  A New Dynamic Direct Shear Testing Device on Rock Joints , 2020, Rock Mechanics and Rock Engineering.

[9]  Xibing Li,et al.  Evaluation of Shear Strength Parameters of Rocks by Preset Angle Shear, Direct Shear and Triaxial Compression Tests , 2020, Rock Mechanics and Rock Engineering.

[10]  Shugang Wang,et al.  A high-precision and user-friendly triaxial apparatus for the measurement of permeability of gassy coal , 2020 .

[11]  Liang Yuan,et al.  A new test method and system for the circumferential deformation of cylindrical standard specimens in geotechnical mechanics and its application , 2020 .

[12]  H. Konietzky,et al.  Effect of shear-induced aperture evolution on fluid flow in rock fractures , 2019, Computers and Geotechnics.

[13]  C. Chassagne,et al.  Design of a parallel plate shearing device for visualization of concentrated suspensions , 2019, Measurement.

[14]  H. Konietzky,et al.  Cyclic Frictional Responses of Planar Joints Under Cyclic Normal Load Conditions: Laboratory Tests and Numerical Simulations , 2019, Rock Mechanics and Rock Engineering.

[15]  Heinz Konietzky,et al.  Complex analysis of shear box tests with explicit consideration of interaction between test device and sample , 2017 .

[16]  Shaojun Li,et al.  Influences of Shear History and Infilling on the Mechanical Characteristics and Acoustic Emissions of Joints , 2017, Rock Mechanics and Rock Engineering.

[17]  H. Konietzky,et al.  Direct shear behavior of a plane joint under dynamic normal load (DNL) conditions , 2016 .

[18]  Chuangbing Zhou,et al.  Laboratory investigation of nonlinear flow characteristics in rough fractures during shear process , 2016 .

[19]  Xin Kang,et al.  Strain-Controlled Cyclic Simple Shear Tests on Sand with Radial Strain Measurements , 2016 .

[20]  P. Rivard,et al.  Shear mechanism of rock joints under pre-peak cyclic loading condition , 2016 .

[21]  L. Ge,et al.  Radial Strain Behaviors and Stress State Interpretation of Soil Under Direct Simple Shear , 2015 .

[22]  Jianye Chen,et al.  Effects of healing on the seismogenic potential of carbonate fault rocks: Experiments on samples from the Longmenshan Fault, Sichuan, China , 2015 .

[23]  X. Kang,et al.  Modified Monotonic Simple Shear Tests on Silica Sand , 2015 .

[24]  J. Avouac,et al.  The seismic cycle in the area of the 2011 Mw9.0 Tohoku‐Oki earthquake , 2014 .

[25]  Jian Zhao,et al.  A Dynamic-induced Direct-shear Model for Dynamic Triggering of Frictional Slip on Simulated Granular Gouges , 2013, Experimental Mechanics.

[26]  Heinz Konietzky,et al.  A New Large Dynamic Rockmechanical Direct Shear Box Device , 2012, Rock Mechanics and Rock Engineering.

[27]  Marco Barla,et al.  Development of a New Direct Shear Testing Apparatus , 2010 .

[28]  Robert M. Ebeling,et al.  Sand-to-Concrete Interface Response to Complex Load Paths in a Large Displacement Shear Box , 2008 .

[29]  Haibo Li,et al.  Experimental Studies on Mechanical Properties of Rock Joints under Dynamic Loading , 2006 .

[30]  B. Chun,et al.  Development of a Direct Shear Apparatus with Rock Joints and Its Verification Tests , 2006 .

[31]  J. Rice.  Heating and weakening of faults during earthquake slip , 2006 .

[32]  Yujing Jiang,et al.  Development of an automated servo-controlled direct shear apparatus applying a constant normal stiffness condition , 2004 .

[33]  M. Boulon,et al.  A new device for investigating the hydro‐mechanical properties of rock joints , 2003 .

[34]  C. Marone,et al.  Effects of normal stress vibrations on frictional healing , 1999 .

[35]  C. Marone.  LABORATORY-DERIVED FRICTION LAWS AND THEIR APPLICATION TO SEISMIC FAULTING , 1998 .

[36]  M. F. Linker,et al.  FAULT STABILITY UNDER CONDITIONS OF VARIABLE NORMAL STRESS , 1992 .