The influence of propagation path on elastic waves as measured by acoustic emission parameters

Apart from the quantitative parameters of acoustic emission testing, such as the total activity or the location of the sources, much more information can be exploited by qualitative characteristics of the signals. The shape of the waveform strongly depends on the source, supplying information on the type of cracks. Shear cracks which normally follow tensile during fracture, emit signals with longer rise time as well as lower average frequency. However, due to the inherent inhomogeneity of the media, which is enhanced by the nucleation of cracks, each pulse suffers strong dispersion which results in serious alteration of the waveform shape. Therefore, classification of cracks based on acoustic emission parameters would be probably misleading in case the separation distance of the sensors is long or the material contains many cracks. In the present study, numerical simulations were conducted in order to examine the influence of distance on the shape distortion of an excited wave inside concrete. Results are compared with actual experiments on steel fiber reinforced concrete, showing that the distance between the source crack and the acquisition point should not exceed a threshold value in order to lead to reliable crack classification.

[1]  A. A. Anastassopoulos,et al.  Clustering methodology for the evaluation of acoustic emission from composites , 1995 .

[2]  Masayasu Ohtsu,et al.  Acoustic Emission Testing , 2006, Advanced Materials Research.

[3]  Gangming Luo,et al.  Ultrasound simulation in bone , 2008, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[4]  Christian U. Grosse,et al.  Stress Drop and Stress Redistribution in Concrete Quantified Over Time by the b-value Analysis , 2006 .

[5]  Steven C. Lovejoy.  Acoustic Emission Testing of Beams to Simulate SHM of Vintage Reinforced Concrete Deck Girder Highway Bridges , 2008 .

[6]  M. Ohtsu,et al.  Phenomenological Model of Corrosion Process in Reinforced Concrete Identified by Acoustic Emission , 2007 .

[7]  Sidney Mindess,et al.  Acoustic Emission Methods , 2003 .

[8]  John H. Page,et al.  Group velocity of acoustic waves in strongly scattering media: Dependence on the volume fraction of scatterers , 1998 .

[9]  Tomoki Shiotani,et al.  Experimental study of surface wave propagation in strongly heterogeneous media. , 2007, The Journal of the Acoustical Society of America.

[10]  Dimitrios G. Aggelis,et al.  Numerical simulation of surface wave propagation in material with inhomogeneity: Inclusion size effect , 2009 .

[11]  N. Barkoula,et al.  Acoustic emission monitoring of degradation of cross ply laminates. , 2010, The Journal of the Acoustical Society of America.

[12]  A. James.  2010 , 2011, Philo of Alexandria: an Annotated Bibliography 2007-2016.

[13]  C. Pecorari,et al.  Scattering of a Rayleigh wave by a surface-breaking crack with faces in partial contact , 2001 .

[14]  Demosthenes Polyzos,et al.  Wave dispersion and attenuation in fiber composites , 2001 .

[15]  M. Ohtsu,et al.  Detection and evaluation of AE waves due to rock deformation , 2001 .

[16]  Christian U. Grosse,et al.  Localization and classification of fracture types in concrete with quantitative acoustic emission measurement techniques , 1997 .

[17]  H Prosser William,et al.  The Propagation Characteristics of the Plate Modes of Acoustic Emission Waves in Thin Aluminum Plates and Thin Graphite/Epoxy Composite Plates and Tubes , 1991 .

[18]  M. Ohtsu.  Recommendation of RILEM TC 212-ACD: acoustic emission and related NDE techniques for crack detection and damage evaluation in concrete* Test method for classification of active cracks in concrete structures by acoustic emission , 2010 .

[19]  N. Barkoula,et al.  Acoustic emission behavior of steel fibre reinforced concrete under bending , 2009 .

[20]  D. Aggelis,et al.  An iterative effective medium approximation (IEMA) for wave dispersion and attenuation predictions in particulate composites, suspensions and emulsions. , 2004, The Journal of the Acoustical Society of America.

[21]  Martine Wevers,et al.  Modal analysis of acoustic emission signals from CFRP laminates , 1999 .

[22]  T. Shiotani,et al.  Characterization of surface crack depth and repair evaluation using Rayleigh waves , 2009 .

[23]  Youyuan Lu,et al.  Damage monitoring of reinforced concrete frames under seismic loading using cement-based piezoelectric sensor , 2011 .

[24]  D. G. Aggelisa,et al.  Ultrasonic wave dispersion and attenuation in fresh mortar , 2004 .

[25]  Laurence J. Jacobs,et al.  Modeling elastic wave propagation in waveguides with the finite element method , 1999 .

[26]  T. Shiotani,et al.  Acoustic Emission and Ultrasound for Damage Characterization of Concrete Elements , 2009 .