Hybrid Structure Design of Lightweight Robotic Arms Based on Carbon Fiber Reinforced Plastic and Aluminum Alloy

Some light materials, such as hollow sphere composite (HSC), carbon fiber reinforced plastic (CFRP), and aluminum alloy (AA), are currently used in the design of lightweight robotic arms. However, the high cost limit the use of HSC, the CFRP has a relatively low cost but poor processing property, and the AA has good processing property but relatively high density. To make up respective shortcomings, this study focuses on the design issues of lightweight robotic arms by using two kinds of materials. Based on the CFRP and AA, a hybrid structure design approach is proposed to minimize the total mass of the lightweight robotic arms with CFRP/AA hybrid structure. To accomplish the objective, structural dimensions and layer parameters in hybrid structures are parameterized as design variables subject to the strength, stiffness, and dynamic constraints. Moreover, the bonding strength of the interaction surfaces between CFRP and AA parts is also considered on the basis of the cohesive zone model (CZM). In optimization design, the ABAQUS and elitist non-dominated sorting genetic algorithm (NSGA-II) in modeFRONTIER utilizing the Python script are respectively employed for the structural analyses and iteration calculation. Finally, a design example and an experimental prototype are provided to validate the proposed method and compare with the previous AA prototype in mass with a reduction of 24.32%.

[1]  Yong Hyeon Cho,et al.  Design of carbon/epoxy–aluminum hybrid upper arm of the pantograph of high-speed trains using adhesive bonding technique , 2016 .

[2]  T. Hemmerling,et al.  First robotic tracheal intubations in humans using the Kepler intubation system. , 2012, British journal of anaesthesia.

[3]  Donghun Lee,et al.  Optimal design and workspace analysis of a mobile welding robot with a 3P3R serial manipulator , 2011, Robotics Auton. Syst..

[4]  Saeid Nahavandi,et al.  Kinematic and dynamic modelling of UR5 manipulator , 2016, 2016 IEEE International Conference on Systems, Man, and Cybernetics (SMC).

[5]  Sandro Wartzack,et al.  Modelling, Construction and Manufacture of a Lightweight Robot Arm , 2013 .

[6]  Je Hoon Oh,et al.  Composite wrist blocks for double arm type robots for handling large LCD glass panels , 2002 .

[7]  Barkawi Sahari,et al.  Experimental Study of Bending Fatigue Characteristics of a Hybrid Aluminum/Composite Drive Shaft , 2007 .

[8]  Shang Jing,et al.  Structure optimization for brushless DC motor in robot's arms using FEM , 2007, 2007 International Conference on Electrical Machines and Systems (ICEMS).

[9]  Lieping Ye,et al.  Compressive bearing capacity of CFRP–aluminum alloy hybrid tubes , 2016 .

[10]  Tegoeh Tjahjowidodo,et al.  Hysteresis modeling and position control of tendon-sheath mechanism in flexible endoscopic systems , 2014 .

[11]  Jian Xu,et al.  A comprehensive study on the locomotion characteristics of a metameric earthworm-like robot , 2015 .

[12]  Ijar M. da Fonseca,et al.  Integrated Structural and Control Optimization , 2004 .

[13]  F. Sonmez,et al.  Design optimization of laminated composites using a new variant of simulated annealing , 2011 .

[14]  Haibin Yin,et al.  A unified design for lightweight robotic arms based on unified description of structure and drive trains , 2017 .

[15]  Bong-Huan Jun,et al.  Design and analysis of carbon fiber reinforced plastic body frame for multi-legged subsea walking robot, Crabster , 2015 .

[16]  Luca Goglio,et al.  Damage analysis of composite–aluminium adhesively-bonded single-lap joints , 2016 .

[17]  Bertrand Tondu,et al.  A Seven-degrees-of-freedom Robot-arm Driven by Pneumatic Artificial Muscles for Humanoid Robots , 2005, Int. J. Robotics Res..

[18]  Norimitsu Sakagami,et al.  Fabrication of a fish-like underwater robot with flexible plastic film body , 2015, Adv. Robotics.

[19]  Gang-Won Jang,et al.  Topology optimization of industrial robots for system-level stiffness maximization by using part-level metamodels , 2016 .

[20]  Michael Rygaard Hansen,et al.  Integrated dimensional and drive-train design optimization of a light-weight anthropomorphic arm , 2012, Robotics Auton. Syst..

[21]  Shuzhi Sam Ge,et al.  Dynamic modelling and adaptive robust tracking control of a space robot with two-link flexible manipulators under unknown disturbances , 2018, Int. J. Control.

[22]  Alois Buchstab,et al.  KUKA Robots On-Site , 2014 .

[23]  Alessandro Gasparetto,et al.  Experimental Validation of a Dynamic Model for Lightweight Robots , 2013 .

[24]  Yanlei Yu,et al.  Fully plastic microrobots which manipulate objects using only visible light , 2010 .

[25]  Brian S. Thompson,et al.  The Design of Flexible Robotic Manipulators with Optimal Arm Geometries Fabricated from Composite Laminates with Optimal Material Properties , 1987 .

[26]  Erika Baumeister,et al.  Advanced New Lightweight Materials: Hollow‐Sphere Composites (HSCs) for Mechanical Engineering Applications , 2003 .

[27]  Panos S. Shiakolas,et al.  Optimum Robot Design Based on Task Specifications Using Evolutionary Techniques and Kinematic, Dynamic, and Structural Constraints , 2002 .

[28]  Dong Kil Shin,et al.  Numerical analysis of the damage behavior of an aluminum/CFRP hybrid beam under three point bending , 2014 .

[29]  Marcus Pettersson,et al.  Drive Train Optimization for Industrial Robots , 2009, IEEE Transactions on Robotics.

[30]  A. Kaldos,et al.  Lightweight, hollow-sphere-composite (HSC) materials for mechanical engineering applications , 2004 .

[31]  Guilin Yang,et al.  Equivolumetric partition of solid spheres with applications to orientation workspace analysis of robot manipulators , 2006, IEEE Transactions on Robotics.

[32]  Shinji Wakao,et al.  Design optimization of a permanent magnet synchronous motor by the response surface methodology , 2002 .

[33]  Nobuyuki Matsui,et al.  Design and analysis of high-power/high-torque density dual excitation switched-flux machine for traction drive in HEVs , 2014 .