New insight into regenerated air heat pump cycle

Regenerated air (reverse Brayton) cycle has unique potentials in heat pump applications compared to conventional vapor-compression cycles. To better understand the regenerated air heat pump cycle characteristics, a thermodynamic model with new equivalent parameters was developed in this paper. Equivalent temperature ratio and equivalent isentropic efficiency of expander were introduced to represent the effect of regenerator, which made the regenerated air cycle in the same mathematical expressions as the basic air cycle and created an easy way to prove some important features that regenerated air cycle inherits from the basic one. Moreover, we proved in theory that the regenerator does not always improve the air cycle efficiency. Larger temperature ratio and lower effectiveness of regenerator could make the regenerated air cycle even worse than the basic air cycle. Lastly, we found that only under certain conditions the cycle could get remarkable benefits from a well-sized regenerator. These results would enable further study of the regenerated air cycle from a different perspective.

[1]  Fengrui Sun,et al.  Heating load, heating-load density and COP optimizations of an endoreversible air heat-pump , 2008 .

[2]  Y. Bi,et al.  Exergy-based ecological optimisation for an endoreversible air heat pump cycle , 2009 .

[3]  Takao Kashiwagi,et al.  Analysis of an air cycle refrigerator driving air conditioning system integrated desiccant system , 2006 .

[4]  Chun-Lu Zhang,et al.  An important feature of air heat pump cycle: Heating capacity in line with heating load , 2014 .

[5]  Shengjun Liu,et al.  Thermodynamic analysis of air cycle refrigeration system for Chinese train air conditioning , 2011 .

[6]  Andrew C. Harvey,et al.  Research and development of an air-cycle heat-pump water heater , 1979 .

[7]  Fengrui Sun,et al.  Thermodynamic optimisation for open regenerated inverse Brayton cycle (refrigeration/heat pump cycle): Part 2 – performance optimisation , 2016 .

[8]  L. A. Sphaier,et al.  Desiccant-assisted humidity control for air refrigeration cycles , 2013 .

[9]  Alexander J. White.  Thermodynamic analysis of the reverse Joule–Brayton cycle heat pump for domestic heating , 2009 .

[10]  D. Matullch.  High-Temperature Bootstrap Compared with F15 Growth Air Cycle Air Conditioning System , 1989 .

[11]  Fengrui Sun,et al.  Optimum allocation of heat exchanger inventory of irreversible air heat pump cycles , 2010 .

[12]  Hefei Zhang,et al.  An open reversed Brayton cycle with regeneration using moist air for deep freeze cooled by circulating water , 2009 .

[13]  M. Goodarzi,et al.  Performance analysis of a modified regenerative Brayton and inverse Brayton cycle , 2014 .

[14]  N. Williamson,et al.  Feasibility of air cycle systems for low-temperature refrigeration applications with heat recovery , 2003 .

[15]  Qun Chen,et al.  An optimization method for gas refrigeration cycle based on the combination of both thermodynamics and entransy theory , 2014 .

[16]  G. Angelino,et al.  Prospects for real-gas reversed Brayton cycle heat pumps , 1995 .

[17]  Lingen Chen,et al.  Ecological, exergetic efficiency and heating load optimizations for irreversible variable-temperature heat reservoir simple air heat pump cycles , 2009 .

[18]  Fengrui Sun,et al.  Comparative performance analysis for endoreversible simple air heat pump cycles considering ecological, exergetic efficiency and heating load objectives , 2009 .

[19]  Fengrui Sun,et al.  Heating load density optimization of an irreversible simple Brayton cycle heat pump coupled to counter-flow heat exchangers , 2012 .

[20]  Xiaoxin Wang,et al.  Reuse of condensed water to improve the performance of an air-cycle refrigeration system for transport applications , 2007 .

[21]  Savvas A. Tassou,et al.  A review of emerging technologies for food refrigeration applications , 2010 .

[22]  Chun-Lu Zhang,et al.  Regenerated air cycle potentials in heat pump applications , 2014 .

[23]  James E. Braun,et al.  Energy efficiency analysis of air cycle heat pump dryers , 2002 .

[24]  Stephen Spence,et al.  Performance analysis of a feasible air-cycle refrigeration system for road transport , 2005 .

[25]  Stephen Spence,et al.  Design, construction and testing of an air-cycle refrigeration system for road transport , 2004 .

[26]  Lingen Chen,et al.  Performance of real regenerated air heat pumps , 1999 .

[27]  Qun Chen,et al.  A global optimization method for regenerative air refrigeration systems , 2014 .

[28]  Fengrui Sun,et al.  Performance analysis of a closed regenerated Brayton heat pump with internal irreversibilities , 1999 .

[29]  Tong Seop Kim,et al.  Off-design operating characteristics of an open-cycle air refrigeration system , 2012 .

[30]  Fengrui Sun,et al.  Exergetic efficiency optimization for an irreversible heat pump working on reversed Brayton cycle , 2010 .

[31]  Judith Evans,et al.  Air cycle combined heating and cooling for the food industry , 2011 .

[32]  Yu Hou,et al.  Developments in reverse Brayton cycle cryocooler in China , 2006 .

[33]  Fengrui Sun,et al.  Exergy-based ecological optimization for an endoreversible variable-temperature heat reservoir air heat pump cycle , 2009 .

[34]  Fengrui Sun,et al.  Heating load, heating load density and COP optimisations for an endoreversible variable temperature heat reservoir air heat pump , 2009 .