Numerical–experimental investigations on the manufacturing of an aluminium bipolar plate for proton exchange membrane fuel cells by warm hydroforming

This research study focuses on the manufacturing of a bipolar plate used in proton exchange membrane fuel cells. In particular, the authors investigate the manufacturing of the part by means of warm hydroforming, adopting an aluminium alloy (AA6061) as sheet material. Both the channel profile (the reagent channel width and the die upper radius), and the bipolar plate geometries (in terms of channel layouts) are investigated by means of finite element simulations. Preliminary experimental investigations were carried out in order to define both the mechanical (flow curves) and strain behaviours (forming limit curves) of the adopted aluminium alloy according to temperature and strain rate. Subsequent finite element investigations aimed to define the channel profile by means of 2D models: a statistical approach was used to evaluate the dimension of the reagent channel width, the die upper radius and the sheet thickness. Finally, proposed bipolar plate geometries were investigated by running 3D simulations at different working temperatures and oil pressures in order to evaluate: (1) the bipolar plate geometry able to avoid regions with critical thinning and (2) suitable parameters for the warm hydroforming process.

[1]  Ramana G. Reddy,et al.  Effect of channel dimensions and shape in the flow-field distributor on the performance of polymer electrolyte membrane fuel cells , 2003 .

[2]  Muammer Koç,et al.  Investigations on forming of aluminum 5052 and 6061 sheet alloys at warm temperatures , 2010 .

[3]  Brent David Cunningham,et al.  The Development of Compression Moldable Polymer Composite Bipolar Plates for Fuel Cells , 2007 .

[4]  M. Schikorra,et al.  Metal forming progress since 2000 , 2008 .

[5]  Mevlut Fatih Peker,et al.  Investigations on the variation of corrosion and contact resistance characteristics of metallic bipo , 2011 .

[6]  Luigi Tricarico,et al.  Numerical/experimental analysis of the sheet hydro forming process using cylindrical, square and compound shaped cavities , 2004 .

[7]  Shi-Hong Zhang,et al.  Hydroforming Highlights: Sheet Hydroforming and Tube Hydroforming , 2004 .

[8]  Muammer Koç,et al.  Comparative investigations on numerical modeling for warm hydroforming of AA5754-O aluminum sheet alloy , 2011 .

[9]  Amit K. Ghosh,et al.  Biaxial warm forming behavior of aluminum sheet alloys , 2003 .

[10]  Klaus Pöhlandt,et al.  Formability of Metallic Materials , 2000 .

[11]  Amit K. Ghosh,et al.  Tensile deformation behavior of aluminum alloys at warm forming temperatures , 2003 .

[12]  Tomokazu Masuda,et al.  Effects of Strain Rate on Deformation Behavior of A6061-T6 Aluminum Alloy , 2003 .

[13]  Tetsuo Naka,et al.  The effects of temperature and forming speed on the forming limit diagram for type 5083 aluminum-magnesium alloy sheet , 2001 .

[14]  Muammer Koç,et al.  Effect of manufacturing processes on contact resistance characteristics of metallic bipolar plates i , 2011 .

[15]  Faramarz Djavanroodi,et al.  Experimental and numerical evaluation of forming limit diagram for Ti6Al4V titanium and Al6061-T6 aluminum alloys sheets , 2010 .

[16]  Shuquan Zhang,et al.  Recent developments in sheet hydroforming technology , 2004 .

[17]  Abdul-Ghani Olabi,et al.  Design of experiment study of the parameters that affect performance of three flow plate configurations of a proton exchange membrane fuel cell , 2010 .

[18]  Jun Ni,et al.  Flow channel shape optimum design for hydroformed metal bipolar plate in PEM fuel cell , 2008 .

[19]  Félix Barreras,et al.  Influence of CrN-coating thickness on the corrosion resistance behaviour of aluminium-based bipolar plates , 2011 .

[20]  Dieter Schmoeckel,et al.  Hydromechanical Deep-Drawing of Aluminium-Alloys at Elevated Temperatures , 2002 .

[21]  Kamaruzzaman Sopian,et al.  Review of the membrane and bipolar plates materials for conventional and unitized regenerative fuel cells , 2009 .

[22]  Muammer Koç,et al.  Feasibility investigations on a novel micro-manufacturing process for fabrication of fuel cell bipolar plates: Internal pressure-assisted embossing of micro-channels with in-die mechanical bonding , 2007 .

[23]  B. Karlsson,et al.  Influence of Temperature and Strain Rate on the Plastic Deformation of Two Commercial High Strength Al Alloys , 2006 .