Energy consumption and greenhouse gas emissions in the recovery and extraction of crude bitumen from Canada’s oil sands

A model – FUNNEL-GHG-OS (FUNdamental ENgineering PrinciplEs-based ModeL for Estimation of GreenHouse Gases in the Oil Sands) was developed to estimate project-specific energy consumption and greenhouse gas emissions (GHGs) in major recovery and extraction processes in the oil sands, namely surface mining and in␣situ production. This model estimates consumption of diesel (4.4–7.1MJ/GJ of bitumen), natural gas (52.7–86.4MJ/GJ of bitumen) and electricity (1.8–2.1kWh/GJ of bitumen) as fuels in surface mining. The model also estimates the consumption of natural gas (123–462.7MJ/GJ of bitumen) and electricity (1.2–3.5kWh/GJ of bitumen) in steam assisted gravity drainage (SAGD), based on fundamental engineering principles. Cogeneration in the oil sands, with excess electricity exported to Alberta’s grid, was also explored. Natural gas consumption forms a major portion of the total energy consumption in surface mining and SAGD and thus is a main contributor to GHG emissions. Emissions in surface mining and SAGD range from 4.4 to 7.4gCO2eq/MJ of bitumen and 8.0 to 34.0gCO2eq/MJ of bitumen, respectively, representing a wide range of variability in oil sands projects. Depending upon the cogeneration technology and the efficiency of the process, emissions in oil sands recovery and extraction can be reduced by 16–25% in surface mining and 33–48% in SAGD. Further, a sensitivity analysis was performed to determine the effects of key parameters on the GHG emissions in surface mining and SAGD. Temperature and the consumption of warm water in surface mining and the steam-to-oil ratio (SOR) in SAGD are major parameters affecting GHG emissions. The developed model can predict the energy consumption and emissions for surface mining and SAGD for oil sands.

[1]  Ali Elkamel,et al.  Energy Optimization Model with CO2-Emission Constraints for the Canadian Oil Sands Industry , 2008 .

[2]  Jacob H. Masliyah,et al.  Understanding Water‐Based Bitumen Extraction from Athabasca Oil Sands , 2008 .

[3]  Patrick Miller,et al.  A techno-economic analysis of cost savings for retrofitting industrial aerial coolers with variable frequency drives , 2012 .

[4]  Svetlana Nikolayevna Rudyk,et al.  Upgrading and extraction of bitumen from Nigerian tar sand by supercritical carbon dioxide , 2014 .

[5]  Heather L MacLean,et al.  Life cycle greenhouse gas emissions of current oil sands technologies: GHOST model development and illustrative application. , 2011, Environmental science & technology.

[6]  E. Firdaus,et al.  Assessment and modelling of the waste heat availability from gas turbine based CHP systems for ORC systems , 2012 .

[7]  Ali Elkamel,et al.  Optimal implementation of CO2 capture technology in power and hydrogen production for oil sands operations , 2010 .

[8]  G. Zimmermann,et al.  Hot water generation for oil sands processing from enhanced geothermal systems: Process simulation for different hydraulic fracturing scenarios , 2014 .

[9]  Ali Elkamel,et al.  A modeling study of the effect of carbon dioxide mitigation strategies, natural gas prices and steam consumption on the Canadian Oil Sands operations , 2012 .

[10]  Albina Mukhametshina,et al.  Electromagnetic Heating of Heavy Oil and Bitumen: A Review of Experimental Studies and Field Applications , 2013 .

[11]  Amit Kumar,et al.  Techno-economic assessment of hydrogen production from underground coal gasification (UCG) in Western Canada with carbon capture and sequestration (CCS) for upgrading bitumen from oil sands , 2013 .

[12]  Harvey W. Yarranton,et al.  Investigation of Oil Sands Froth Treatment , 2008 .

[13]  Manuel Oriol,et al.  1. PROJECT DESCRIPTION , 2006 .

[14]  Heather L. MacLean,et al.  Understanding the Canadian oil sands industry’s greenhouse gas emissions , 2009 .

[15]  Ali Elkamel,et al.  Modeling the energy demands and greenhouse gas emissions of the Canadian oil sands industry , 2007 .

[16]  Ali Elkamel,et al.  Stochastic Modeling of the Oil Sands Operations under Greenhouse Gas Emission Restrictions and Water Management , 2013 .

[17]  Ian D. Gates,et al.  Practical process design for in situ gasification of bitumen , 2013 .

[18]  Joule A Bergerson,et al.  Life cycle Greenhouse gas emissions of current Oil Sands Technologies: surface mining and in situ applications. , 2012, Environmental science & technology.

[19]  Adam R. Brandt,et al.  Historical trends in greenhouse gas emissions of the Alberta oil sands (1970–2010) , 2013 .

[20]  W. F. Heins,et al.  Operational Data From the World's First SAGD Facilities Using Evaporators to Treat Produced Water for Boiler Feedwater , 2008 .

[21]  Ian D. Gates,et al.  Oil phase viscosity behaviour in Expanding-Solvent Steam-Assisted Gravity Drainage , 2007 .

[22]  Adam R. Brandt,et al.  The energy efficiency of oil sands extraction: Energy return ratios from 1970 to 2010 , 2013 .

[23]  Matteo Chiesa,et al.  Solar assisted method for recovery of bitumen from oil sand , 2009 .

[24]  Norman Sartorius,et al.  Calgary, Alberta, Canada , 2005 .

[25]  Michal C. Moore,et al.  Evaluating the role of cogeneration for carbon management in Alberta , 2011 .

[26]  Harvey W. Yarranton,et al.  The Effect of Oil Sands Bitumen Extraction Conditions on Froth Treatment Performance , 2005 .

[27]  Sonia Yeh,et al.  Land Use Greenhouse Gas Emissions from Conventional Production and Oil Sands , 2010 .

[28]  Ali Elkamel,et al.  Optimal integration of nuclear energy and water management into the oil sands operations , 2012 .

[29]  S. Das.  Improving the Performance of SAGD , 2005 .

[30]  Adam R. Brandt,et al.  Variability and uncertainty in life cycle assessment models for greenhouse gas emissions from Canadian oil sands production. , 2012, Environmental science & technology.