Nonlinear lithographic properties by femtosecond laser pulses using a low-NA lens

Refractive indices of a chemically amplified photoresist were changed by femtosecond (fs) laser irradiation without post exposure bake (PEB) treatment. We have proposed a combined process of fs nonlinear lithography and plasma etching for the fabrication of functional photonic devices with 3-D surfaces of inorganic materials. In this study, we report the nonlinear lithographic properties using fs laser pulses focused by a low-NA objective lens. Diffraction gratings were written directly inside the pre-baked resists by fs laser nonlinear absorption. From diffraction efficiencies using He-Ne laser light, refractive indices were changed by 8 × 10-3 without PEB treatment which was required for cross-linking reaction. In contrast, no changes of refractive index were observed in the case of ultraviolet light exposure (i-line). Considering this large refractive index change and the threshold intensity of nonlinear absorption of the resist, self-guiding of fs laser pulses can occur due to the optical confinement in the radial direction. In fact, filamentary patterns which were optical-axially asymmetric and longer than the focal depth could be obtained without translating the focal spot using this lithographic property.

[1]  Masaaki Sakakura,et al.  Temperature distribution and modification mechanism inside glass with heat accumulation during 250 kHz irradiation of femtosecond laser pulses , 2008 .

[2]  A. Boisen,et al.  Processing of thin SU-8 films , 2008 .

[3]  Kazuyoshi Itoh,et al.  Structural modification in fused silica by a femtosecond fiber laser at 1558 nm. , 2006, Optics express.

[4]  Junji Nishii,et al.  Three-dimensional SiO2 surface structures fabricated using femtosecond laser lithography , 2009 .

[5]  Fumiyo Yoshino,et al.  Heat accumulation effects in femtosecond laser-written waveguides with variable repetition rate. , 2005, Optics express.

[6]  Saulius Juodkazis,et al.  Feature-size reduction of photopolymerized structures by femtosecond optical curing of SU-8 , 2006 .

[7]  Satoru Shoji,et al.  Self-written waveguides in photopolymerizable resins. , 2001, Optics letters.

[8]  B N Chichkov,et al.  Femtosecond laser-induced two-photon polymerization of inorganic-organic hybrid materials for applications in photonics. , 2003, Optics letters.

[9]  Hiroaki Nishiyama,et al.  Femtosecond Laser Nonlinear Lithography , 2010 .

[10]  David J. Hwang,et al.  Self-grown fiber fabrication by two-photon photopolymerization , 2008 .

[11]  Eric Mazur,et al.  Micromachining of bulk glass with bursts of femtosecond laser pulses at variable repetition rates. , 2006, Optics express.

[12]  Okihiro Sugihara,et al.  A three-dimensional polymeric optical circuit fabrication using a femtosecond laser-assisted self-written waveguide technique , 2008 .

[13]  E. Mazur,et al.  Bulk heating of transparent materials using a high-repetition-rate femtosecond laser , 2003 .

[14]  Saulius Juodkazis,et al.  Three-dimensional woodpile photonic crystal templates for the infrared spectral range. , 2004, Optics letters.

[15]  Hiroshi Ito,et al.  Light-induced self-written three-dimensional optical waveguide , 2001 .

[16]  Stephen Ho,et al.  Transition from thermal diffusion to heat accumulation in high repetition rate femtosecond laser writing of buried optical waveguides. , 2008, Optics express.

[17]  Satoshi Kawata,et al.  Finer features for functional microdevices , 2001, Nature.