Ductile fracture of solder-Cu interface and inverse identification of its interfacial model parameters

[1]  F. Yusof,et al.  Evolution of microstructure and mechanical properties of Cu/SAC305/Cu solder joints under the influence of low ultrasonic power , 2017 .

[2]  Bin Wang,et al.  Influence of Ce addition on Sn-3.0Ag-0.5Cu solder joints: Thermal behavior, microstructure and mechanical properties , 2017 .

[3]  Matej Borovinšek,et al.  Estimating the base material properties of sintered metallic hollow spheres by inverse engineering procedure , 2016 .

[4]  J. K. Spelt,et al.  Fracture load prediction of BGA solder joints: Cohesive zone modeling and experimental verification , 2016 .

[5]  J. Botsis,et al.  Multi-scale modeling of elasto-plastic response of SnAgCu lead-free solder alloys at different ageing conditions: Effect of microstructure evolution, particle size effects and interfacial failure , 2016 .

[6]  Guozhong Chai,et al.  Three-dimensional thermal weight function method for the interface crack problems in bimaterial structures under a transient thermal loading , 2016 .

[7]  Julien Yvonnet,et al.  A phase-field method for computational modeling of interfacial damage interacting with crack propagation in realistic microstructures obtained by microtomography , 2016 .

[8]  J. K. Spelt,et al.  Combined effect of strain-rate and mode-ratio on the fracture of lead-free solder joints , 2015 .

[9]  Y. Liu,et al.  Reliability study of solder interface with voids using an irreversible cohesive zone model , 2015, 2015 16th International Conference on Electronic Packaging Technology (ICEPT).

[10]  J. K. Spelt,et al.  Comparison of solder joint fracture behavior in Arcan and DCB specimens , 2015 .

[11]  N. Dourado,et al.  Bilinear approximations to the mixed-mode I–II delamination cohesive law using an inverse method , 2015 .

[12]  Lihua Liang,et al.  Inverse parameter identification of cohesive zone model for simulating mixed-mode crack propagation , 2014 .

[13]  Xin Li,et al.  Applying viscoplastic constitutive models to predict ratcheting behavior of sintered nanosilver lap-shear joint , 2014 .

[14]  F. Qin,et al.  Intergranular cracking simulation of the intermetallic compound layer in solder joints , 2013 .

[15]  J. Réthoré,et al.  Identification of a cohesive zone model from digital images at the micron-scale , 2013 .

[16]  Salvatore Sessa,et al.  Identification of mode-I cohesive parameters for bonded interfaces based on DCB test , 2013 .

[17]  Liao Xiang-y.  DETERMINATION OF PROPERTIES OF GRATED MATERIALS BASED ON KALMAN FILTER ALGORITHM , 2013 .

[18]  Wang Xiao-gui.  Genetic algorithm based inverse analysis for functionally graded material parameters , 2013 .

[19]  A. Airoldi,et al.  Identification of material parameters for modelling delamination in the presence of fibre bridging , 2012 .

[20]  M.F.S.F. de Moura,et al.  Bilinear approximations to the mode II delamination cohesive law using an inverse method , 2012 .

[21]  Young-Bae Park,et al.  Effects of surface finishes and loading speeds on shear strength of Sn-3.0Ag-0.5Cu solder joints , 2012 .

[22]  Mohd Faizul Mohd Sabri,et al.  A review on thermal cycling and drop impact reliability of SAC solder joint in portable electronic products , 2012, Microelectron. Reliab..

[23]  Chunqing Wang,et al.  Effects of bump size on deformation and fracture behavior of Sn3.0Ag0.5Cu/Cu solder joints during shear testing , 2011 .

[24]  A. Waas,et al.  Experiments and Cohesive Zone Model Parameters for T650/AFR-PE-4/FM680-1 at High Temperatures , 2011 .

[25]  Jan K. Spelt,et al.  Effect of geometry on the fracture behavior of lead-free solder joints , 2011 .

[26]  Y. Liu,et al.  The experimental and numerical investigation on shear behaviour of solder ball in a wafer level chip scale package , 2010, 2010 Proceedings 60th Electronic Components and Technology Conference (ECTC).

[27]  Q. Qin,et al.  Viscoelastic adhesive interfacial model and experimental characterization for interfacial parameters , 2010 .

[28]  J. K. Spelt,et al.  R-curve behavior of Cu–Sn3.0Ag0.5Cu solder joints: Effect of mode ratio and microstructure , 2010 .

[29]  Long Bin Tan,et al.  Rate-dependent properties of Sn-Ag-Cu based lead free solder joints , 2009, 2009 11th Electronics Packaging Technology Conference.

[30]  J. Qu,et al.  Simulation of dynamic fracture along solder–pad interfaces using a cohesive zone model , 2009 .

[31]  Glaucio H. Paulino,et al.  A unified potential-based cohesive model of mixed-mode fracture , 2009 .

[32]  C. Kim,et al.  Study of Fracture Mechanics in Testing Interfacial Fracture of Solder Joints , 2008 .

[33]  P. Lall,et al.  Cohesive-Zone Explicit Sub-Modeling for Shock Life-Prediction in Electronics , 2007, 2007 Proceedings 57th Electronic Components and Technology Conference.

[34]  Laurent Champaney,et al.  A damage-mechanics-based approach for modelling decohesion in adhesively bonded assemblies , 2006 .

[35]  van den Mj Marco Bosch,et al.  An improved description of the exponential Xu and Needleman cohesive zone law for mixed-mode decohesion , 2006 .

[36]  Guo-Quan Lu,et al.  Fracture mechanics analysis of the effect of substrate flexibility on solder joint reliability , 2005 .

[37]  Ganesh Subbarayan,et al.  A hybrid model for computationally efficient fatigue fracture simulations at microelectronic assembly interfaces , 2005 .

[38]  John H. L. Pang,et al.  Drop Impact Reliability Testing for Lead-Free and Leaded Soldered IC Packages , 2005, Proceedings Electronic Components and Technology, 2005. ECTC '05..

[39]  Nikhilesh Chawla,et al.  Deformation analysis of lap-shear testing of solder joints , 2005 .

[40]  Sanjay Sampath,et al.  Micro-indentation and inverse analysis to characterize elastic /plastic graded materials , 2003 .

[41]  Sanjay Sampath,et al.  Determination of properties of graded materials by inverse analysis and instrumented indentation , 2000 .

[42]  Viggo Tvergaard,et al.  On the toughness of ductile adhesive joints , 1996 .

[43]  Xiaopeng Xu,et al.  Numerical simulations of fast crack growth in brittle solids , 1994 .

[44]  Mohinder S. Grewal,et al.  Kalman Filtering: Theory and Practice , 1993 .

[45]  Zhigang Suo,et al.  Mode mixity effect on the damage of a constrained ductile layer , 1992 .

[46]  A. Evans,et al.  The fracture energy of bimaterial interfaces , 1990 .