Issues in simulating falling weight deflectometer test on concrete pavements

Falling Weight Deflectometer (FWD) produces pavement responses using a falling mass drop. This study investigated the features involved in the finite element modeling of FWD tests to help in the calibration of backcalculation. Falling mass, model size, subgrade damping, and boundary conditions were studied to reveal the significances of these factors on pavement responses. By modeling the falling mass in finite element models, this study has justified the idea that field-measured time history of impact force can be used as an alternative to falling mass. It is also concluded that subgrade damping, self-weight of slab, and boundary conditions are significant in modeling and interpretation of FWD finite element analysis. Finite element model with at least six times radius of relative stiffness is required to simulate dynamic responses of a continuously reinforced concrete slab.

[1]  Robert L. Lytton.  Backcalculation of Pavement Layer Properties , 1989 .

[2]  Nicholas J. Carino,et al.  Finite element studies of the impact-echo response of plates containing thin layers and voids , 1990 .

[3]  Michael I Darter,et al.  IMPROVED METHODS FOR SELECTION OF K VALUE FOR CONCRETE PAVEMENT DESIGN , 1995 .

[4]  Kenneth H. Stokoe,et al.  Response of pavement systems to dynamic loads imposed by nondestructive tests , 1995 .

[5]  Michael I Darter,et al.  Three-dimensional finite element model for analysis of concrete pavement support , 1995 .

[6]  Tien Fang Fwa,et al.  Analysis of Concrete Pavements by Rectangular Thick-Plate Model , 1996 .

[7]  Samir N. Shoukry,et al.  Assessment of the performance of rigid pavement back-calculation through finite element modeling , 1999, Smart Structures.

[8]  Kenneth H. Stokoe,et al.  Numerical Simulation of Rolling Dynamic Deflectometer Tests , 1999 .

[9]  Lev Khazanovich.  Dynamic Analysis of FWD Test Results for Rigid Pavements , 1999 .

[10]  Shiraz D Tayabji,et al.  Backcalculation of layer parameters for LTPP test sections, Volume 1: Slab on elastic solid and slab on dense-liquid foundation analysis of rigid pavements , 2001 .

[11]  Karim Chatti,et al.  Simple Dynamic Backcalculation Procedure for Falling Weight Deflectometer Testing of Rigid Pavements , 2001 .

[12]  James A Crovetti.  Deflection-Based Analysis Techniques for Jointed Concrete Pavement Systems , 2002 .

[13]  Andreas Loizos,et al.  DYNAMIC STIFFNESS MODULUS FOR PAVEMENT SUBGRADE EVALUATION , 2003 .

[14]  Chen-Ming Kuo,et al.  Development of 3‐D finite element model for flexible pavements , 2004 .

[15]  Hyun-Ho Kim,et al.  Finite element analysis of the impact-echo testing at a concrete slab with complex boundary conditions , 2005 .

[16]  Andreas Loizos,et al.  Verification of falling weight deflectometer backanalysis using a dynamic finite elements simulation , 2005 .